-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need cycle parking that a facilities manager can specify once and forget about, this tubular stand is the workhorse answer. It is an inverted-U hoop in 48mm round tube, 750mm high and 800mm long, with a second horizontal bar welded between the legs at mid-height. Each stand parks two bicycles, one either side, and riders lock up with their own D-lock or chain. You choose the finish (galvanised, galvanised with a black finish, or stainless steel) and the fixing (cast in or bolt down).
Why this design works
The crossbar gives riders more places to lock
A plain hoop gives a rider two places to lock: the top rail and the legs. The mid-height bar on this stand, centred 375mm above the ground, adds a third. Smaller frames, step-through bikes and children's bikes that sit below the top rail can be locked to the crossbar through the frame. A rider can also lock a wheel and the frame together without bending the bike against the stand.
48mm tube and a solid fixing
The frame is 48mm diameter round tube with radiused top corners and a flat top rail. The cast-in version goes 300mm below finished ground level. The bolt-down version stands on a 133mm x 5mm round plate on each leg, with three holes per plate (six fixings per stand).
Finishes for the setting
Galvanised mild steel is the low-maintenance choice for most sites. The galvanised and black version adds a black finish over the galvanising, so it looks smarter outside office entrances and in town centres. Stainless steel suits coastal sites, public squares and buildings with other stainless street furniture.
- Parks two bicycles per stand, one each side
- Crossbar at mid-height for extra locking points
- 48mm tube, 750mm high x 800mm long
- Cast in (300mm) or bolt down (133mm plates, 6 fixings)
- Made in Britain
Where it's used
Staff cycle parking at offices and business parks, school and college playgrounds, supermarket and retail frontages, libraries, surgeries and leisure centres, plus council high streets and public squares. Stands are usually installed in rows; each one is freestanding, so you can add more as demand grows.
Specifications
| Design | Inverted-U tubular hoop with welded mid-height crossbar |
|---|---|
| Height above ground | 750mm |
| Length | 800mm |
| Tube | 48mm diameter round tube |
| Crossbar height | 375mm above ground (centre) |
| Wall thickness | Not published for this line |
| Capacity | 2 bicycles (one each side) |
| Cast-in version | Legs set 300mm below ground into concrete |
| Bolt-down version | Round flange plate 133mm x 5mm per leg; 6 bolts per stand (3 per plate) |
| Fixings | Not included. Bolt size not published |
| Finishes | Galvanised mild steel; galvanised with black finish; stainless steel grade 304 |
| Weight | Galvanised and galvanised & black: 11kg cast in, 10kg bolt down. Stainless: 11kg cast in, 9kg bolt down |
| Guarantee | 12 months (if installed and used correctly) |
Choosing the right option
Finish. Galvanised is the most economical and the usual choice for staff parking, schools and service yards. Choose galvanised and black where the stand is part of a building's frontage or a public realm scheme and needs to look finished. Choose stainless steel for seafront and exposed sites, prestige entrances, or anywhere it needs to match existing stainless bollards and street furniture. Grade 316 stainless is also made for marine environments. Call us for a price.
Fixing. Cast in is the more secure, cleaner installation: there are no plates or bolt heads on show, and it suits new block paving, tarmac or landscaping where you can excavate. Bolt down suits an existing sound concrete slab where you cannot dig, or where you may want to move the stands later. The bolt-down stand needs a concrete base thick enough to take anchor fixings. It is not suitable for bolting into block paving or tarmac alone.
Installation, use & care
Cast in: dig a hole for each leg and set the legs 300mm deep in concrete, checking level and plumb. Bolt down: drill the concrete through the plate holes and fix with six suitable anchor bolts (three per plate). Fixings are not included. Leave at least a bike's width either side of each stand so both sides can be used. Wash stands down with plain water occasionally; near the coast, wipe stainless more often to keep it bright.
Frequently asked questions
How many bikes does one stand hold?
Two: one parked parallel to each side. Riders lock the frame to the top rail, legs or crossbar with their own lock.
Are fixings supplied with the bolt-down version?
No. Each stand needs six anchor bolts, three through each 133mm plate. Choose fixings that suit your concrete.
How deep do the cast-in legs go?
The cast-in stand is set 300mm below finished ground level in concrete.
What is the difference between this and a plain hoop stand?
The welded mid-height crossbar, which adds locking points for smaller and step-through frames.
Ordering & delivery
Select the finish and fixing above and add the quantity you need. Prices include VAT. For larger schemes, mixed finishes, grade 316 stainless or delivery questions, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your site postcode.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.







