-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Every loading bay has the same weak point: the last few metres of a reverse, when the driver is working off mirrors and the trailer has to land square on the dock. These cranked HGV wheel guides give the rear wheels a solid steel kerb to run against, one either side of the bay, so the trailer is steered straight in rather than corrected by the dock buffers, the door frame or the next vehicle along. Each guide is 1800mm long, stands 320mm high and is sold as a pair, one left-hand and one right-hand crank. Choose plain galvanised or galvanised with a yellow powder coat, in 139mm or 168mm tube. They are made in Britain and bolt down to a suitable concrete surface.
Why it works
A gentle 15° crank, not a hard stop
The entry end of each guide is cranked outwards at 15°. That angle is shallow enough that a tyre wall arriving off-line is nudged back towards the centre of the bay instead of hitting a blunt end. As the trailer reverses further, the straight 1800mm run keeps the wheels parallel to the bay all the way back towards the dock.
320mm high, at tyre-wall height
At 320mm installed height the tube meets the sidewall of an HGV tyre, so the wheel is guided by its tyre wall rather than by the trailer bodywork.
Thick-wall tube on wide plates
Both diameters use 5mm wall tube. Each end lands on a 250 x 250 x 10mm square plate taking four bolts, eight per guide, so side load from a wheel is spread across two well-separated fixing points. The pair weighs 76kg in 139mm tube and 100kg in 168mm.
Galvanised under the colour
The steel is galvanised mild steel. The yellow version is powder coated over the galvanising, so if a tyre scuffs the paint the zinc layer underneath still protects the steel.
Where it's used
The main use is at HGV loading bays and dock levellers in distribution centres, cold stores, parcel hubs and manufacturing sites, where trailers reverse onto a dock many times a day. The same guides work at roller-shutter goods-in doors with no dock, along vehicle routes inside large sheds, and in front of racking ends, plant and machinery that forklifts and delivery vehicles pass close to.
Specifications
| Length | 1800mm per guide |
|---|---|
| Height (installed) | 320mm |
| Tube diameter | 139mm or 168mm |
| Wall thickness | 5mm |
| Crank angle | 15° |
| Base plates | 2 per guide, square, 250 x 250 x 10mm, 4 holes each (Ø18mm on the drawing) |
| Fixings | Bolt down only. 8 x 16mm bolts per guide, not included |
| Material | Galvanised mild steel |
| Finish | Galvanised, or galvanised plus yellow powder coat (RAL not published for this line) |
| Weight per pair | 76kg (139mm) / 100kg (168mm) |
| Supplied as | Pair: 1 x left-hand crank + 1 x right-hand crank. Price is per pair |
| Guarantee | 12 months, if installed and used correctly |
| Bolt grade / embedment, galvanising standard | Not published for this line |
Choosing the right option
Finish. Plain galvanised suits most yards and gives the lowest price. Choose galvanised and yellow where drivers need a clear visual target, such as poorly lit bays, night working, or sites already marked out in yellow. You get the same galvanised protection underneath.
Tube diameter. The 139mm tube covers routine dock work. The 168mm tube is a bigger, heavier section, 100kg a pair against 76kg, for bays that take more knocks: high-traffic distribution sites, shunter-operated yards, or places where guides have been bent before. Height, length, crank and plates are the same for both sizes, so you can mix them across a site without changing the layout.
Installation, use & care
Fix to a sound concrete surface using eight 16mm bolts per guide (sixteen per pair). Bolts are not supplied, so add suitable fixings to your order. Set the pair either side of the bay with the cranked ends facing the yard and the straight runs leading back to the dock. Mark out the spacing to suit your trailers and dock layout before drilling. Check bolts are tight after the first weeks of use and at routine inspections. Touch up any damaged powder coat on the yellow version.
FAQ
Is the price for one guide or two?
The price is for a pair: one left-hand and one right-hand cranked guide, enough for one loading bay.
Are bolts included?
No. Each guide needs eight 16mm bolts, sixteen per pair. Choose anchors that suit your concrete; we can advise on suitable heavy-duty fixings.
Can they be concreted in instead of bolted?
No. This model is bolt-down only, with two square base plates per guide fixed to a suitable concrete surface.
Is the yellow version still galvanised?
Yes. The yellow powder coat is applied over galvanised steel, so the steel stays protected if the coating is chipped.
Ordering & delivery
Each pair is 76kg or 100kg, so delivery is arranged as a heavy item to a site that can receive it. For several bays, site delivery questions or matching fixings, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your quantities and postcode, and we will confirm lead time and delivery.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



