-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Building corners, racking ends and plant-room cabinets take the hits that straight walls avoid. A forklift swings wide or an HGV cuts a turn short, and the corner pays for it. This two-leg corner protection hoop wraps a single bent steel frame around the outside of that corner, so the first contact lands on 60mm steel tube instead of brickwork, cladding or a racking upright. It is made for warehouse, logistics and facilities managers who need a tidy, fixed guard on a known pinch point. You choose a 500mm or 800mm height, a plain galvanised or yellow-and-black finish, and a concrete-in or bolt-down fixing.
Why it works
One frame that follows the corner
The hoop stands on two legs only, one on each face of the corner, and the rail between them sweeps around the corner in one smooth bend. Nothing sits directly at the corner tip, so the guard keeps a clear gap from the wall it protects. The 700 x 700mm footprint covers both faces. On the 800mm version a second rail at mid-height follows the same bend, which catches lower bumpers, pallet edges and forks under the top rail.
Galvanised mild steel
The frame is mild steel tube, galvanised for long life outdoors and in damp loading areas. The plain galvanised finish suits sites that want a low-key guard. The yellow version is galvanised first and then coated, with 150mm black reflective bands where drivers will see them: two on the 500mm hoop and four on the 800mm hoop.
Two ways to fix it
Concrete-in hoops go 300mm below ground and have welded fixing spikes on the legs for a firm anchor in the concrete. Bolt-down hoops have a base plate on each leg for fixing to a suitable concrete surface where you cannot dig.
Where it's used
Typical spots are the external corners of warehouses and industrial units beside yards and loading bays, the end bays of pallet racking along forklift aisles, internal wall corners beside roller-shutter doorways, plant rooms and switchgear cabinets, and the corners of substations, bin stores and kiosks on service yards.
Specifications
| Design | Two-leg corner hoop with swept rail |
|---|---|
| Material | Mild steel, galvanised |
| Tube diameter | 60mm |
| Wall thickness | 3mm (stated by UK stockists; not published by the maker) |
| Height above ground | 500mm or 800mm |
| Rails | 500mm: single rail. 800mm: top rail plus mid-height rail |
| Footprint (W x D) | 700 x 700mm |
| Finish | Galvanised, or galvanised and coated yellow with 150mm black reflective bands (2 bands at 500mm, 4 at 800mm) |
| Fixing | Concrete in (300mm below ground, welded fixing spikes) or bolt down (base plate on each leg) |
| Fixing bolts | Not included |
| Base plate size | Not published for this line |
| Weight | 500mm: 9kg. 800mm: 16kg |
| Guarantee | 12 months if installed and used correctly |
| Origin | Made in Britain |
Choosing the right option
Height. The 500mm hoop suits pallet trucks, cars and forklift wheels near a racking end or cabinet. Choose 800mm where forks, HGV bumpers or van bodies could ride over a low guard. Its mid rail also closes the gap underneath.
Finish. Plain galvanised is the hard-wearing choice for yards and back-of-house areas. Yellow with black bands is easier to see from a cab, especially in poor light, and suits busy aisles and shared traffic routes.
Fixing. Concrete in gives the firmest anchor where you can break out the ground. Bolt down suits finished warehouse floors and slabs you do not want to dig up.
Tube size and shape. This is the lighter two-leg design in 60mm tube, with nothing at the corner tip. For heavier traffic, or where you want a third leg right at the corner, look at our three-leg corner hoops in 60mm and 76mm tube.
Installation, use and care
Concrete-in hoops need a suitable excavated hole at each leg. Set the legs 300mm below ground in concrete. Bolt-down hoops fix to a suitable concrete surface through the base plates. Fixing bolts are not supplied, so order anchors to suit your slab. Check the hoop after any impact, and replace it if the frame is bent or the fixings have loosened. Keep the reflective bands clean so drivers can see them.
Frequently asked questions
Are fixing bolts included with the bolt-down version?
No. The price excludes fixing bolts. UK stockists quote six M12 anchors per hoop, three per leg. Choose anchors to suit your concrete.
How deep do the concrete-in legs go?
300mm below ground. The legs have welded fixing spikes to anchor them in the concrete. Make each hole wide enough to surround the leg with concrete.
Does the 800mm hoop have a second rail?
Yes. The 800mm version adds a mid-height rail that follows the same bend as the top rail. The 500mm version has a single rail.
Can I fit it on an internal corner?
The hoop is shaped to wrap the outside of a corner, such as a building edge, a racking end or a cabinet. It is not designed to sit inside a recess.
Ordering and delivery
Choose your height, finish and fixing above and add to basket. Each option ships as one complete hoop. For quantity pricing, site layouts or lead times, call 01744 520110 or email sales@industrialsuppliesco.co.uk. We will confirm the dispatch date when you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.









