-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Forklifts clip racking ends. Vans reverse into door frames, and cars cut across footpaths. A black and yellow steel bollard marks the hazard and takes the knock before your building, racking or pedestrians do. This bollard stands 1000mm above ground. It is galvanised mild steel tube, coated black, with two 150mm reflective yellow bands that catch headlights and forklift lamps. There are twelve diameters, from a slim 60mm post for walkways to a 323mm column for loading bays and HGV yards. Each size comes either with a welded base plate for bolting to an existing slab, or as a cast-in bollard that goes 400mm into concrete.
Why it works
Seen before it is hit
Black and yellow is the warning pattern drivers and forklift operators already know. The two 150mm reflective bands are spaced 200mm apart. The pattern stays visible from every side, so the bollard shows up in dim warehouse aisles, under yard lighting and in headlights after dark.
Galvanised under the black coat
The tube is galvanised mild steel, then coated black. If a scrape takes the coating back, the zinc layer underneath still protects the steel. That matters on external yards and car parks, where a bare scratch would otherwise start to rust. A welded steel cap closes the top, so rain and debris stay out of the tube.
Wall thickness rises with the diameter
The 60mm to 114mm sizes and the 152mm size use 3mm wall tube. The 139mm and 168mm to 219mm sizes step up to 5mm. The 273mm and 323mm columns use 6.3mm wall, giving the weight and stiffness to stand up to HGV and heavy forklift traffic.
- 1000mm above ground on every size
- Galvanised mild steel, coated black
- 2 x 150mm reflective yellow bands, spaced 200mm apart
- Bolt down base plate or 400mm cast-in with welded fixing spikes
- For internal and external use
Where it's used
Racking ends and aisle junctions in warehouses and distribution centres. Roller shutter door frames, dock levellers and loading bay corners. Building corners, gas meters, fire hydrants and electrical cabinets in service yards. Pedestrian routes beside car park bays, and drive-thru lanes or kerb edges at retail parks. Smaller diameters suit walkways and workshops; the 219mm to 323mm columns are for HGV yards and loading docks.
Specifications
| Height above ground | 1000mm |
| Diameters | 60, 76, 90, 101, 114, 139, 152, 168, 193, 219, 273 and 323mm |
| Material | Galvanised mild steel, coated black |
| Reflective bands | 2 x 150mm yellow, spaced 200mm apart |
| Top | Welded steel cap |
| Wall thickness | 3mm (60 to 114mm and 152mm), 5mm (139mm and 168 to 219mm), 6.3mm (273 and 323mm) |
| Bolt-down base plate | 3-hole round 133mm x 5mm (60 and 76mm); 3-hole round 180mm x 5mm (90 to 114mm); 4-hole square 250mm x 10mm (139 to 193mm); 4-hole square 400mm x 10mm (219 to 323mm) |
| Cast-in depth | 400mm below ground, with welded fixing spikes |
| Weight, bolt down | 6kg (60mm) to 62kg (323mm) |
| Weight, cast-in | 6kg (60mm) to 69kg (323mm) |
| Fixing bolt size | Not published for this line |
| Impact rating | Not published for this line |
| Manufacturer's guarantee | 12 months when installed and used correctly |
Choosing the right option
Diameter: match the bollard to what is likely to hit it. For pedestrian routes, cars and pallet trucks, 60mm to 114mm is usually enough. For counterbalance forklifts, vans and racking ends, choose 139mm to 193mm. For loading bays, HGV turning areas and building corners next to heavy traffic, the 219mm to 323mm columns carry the most steel. Their 5mm and 6.3mm walls make them the stiffest in the range.
Bolt down or cast-in: bolt down when you have a sound concrete slab you don't want to break up. It is the usual choice inside warehouses. Choose cast-in on new work, block paving or tarmac, or anywhere the ground is not solid concrete. The bollard goes 400mm into a concrete-filled hole, and the welded spikes lock it in place.
Installation, use & care
Bolt-down bollards fix through the base plate into a suitable concrete surface, using three or four anchors depending on the plate. Anchors are not listed as supplied, so allow for fixings rated for your slab. For cast-in bollards, excavate a hole deep enough for the 400mm below-ground section. Set the bollard upright and fill with concrete, then support it until cured. Check fixings after any impact, and touch up scraped coating to keep the finish tidy.
Frequently asked questions
How tall is the bollard?
1000mm above ground on every diameter. The cast-in version has a further 400mm that sits below ground.
Are fixing bolts included?
Fixings are not listed as supplied. The plate takes three anchors on 60mm to 114mm sizes and four on 139mm and above. Choose anchors to suit your floor.
Can it go outside?
Yes. It is galvanised under the black coating and suitable for internal and external use.
Is it crash tested?
No impact rating is published for this line. It is designed to take the everyday knocks of warehouse and yard traffic, not to stop vehicles at speed.
Ordering & delivery
Choose the fixing and diameter above. Need a run of bollards, mixed diameters or a delivery date for a site? Call us on 01744 520110 or email sales@industrialsuppliesco.co.uk and we'll confirm availability and lead time.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




