-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
The rounded black end that finishes a sectional speed bump. Fit one of these at each end of a run of our 500mm speed bump sections. It slopes down to the road at its rounded end, so the bump finishes neatly at the edge of the lane. It has solid black rubber over commercial grade rubber, and it fixes down at 3 points. It measures about 250 x 400 x 50mm and weighs about 3kg. The price is for one end section, and a run takes two.
Why this end section works
A sloping end. The section starts at the full 50mm height at its straight side and slopes down to the road at its rounded end.
Rounded corners. The outer corners are rounded, in solid black rubber, with no square end to catch on.
Three recessed fixings. Two holes sit near the straight side and one near the rounded end, each for an M12 fixing with a 35mm recess.
Where it is used
Use it at both ends of a sectional speed bump in car parks and at supermarkets, on private service roads and at site entrances. The bump should be used with signs that warn drivers and tell them to reduce their speed.
Specifications
| What you get | One end section, priced each. Fixings not included |
|---|---|
| Overall size | Approx 250 x 400 x 50mm |
| Weight | About 3kg |
| Material | Commercial grade rubber capped with solid black rubber |
| Fixing holes | 3, for M12 with a 35mm recess |
| Fixings for concrete | 3 x M12 x 100mm through stud |
| Fixings for tarmac | 3 x M12 x 100mm rubber sleeve fixing |
| Load rating | Not published for this line |
Sizes are approximate, as moulded rubber varies slightly.
How to fit it
- Butt the straight side up to the last middle section.
- Mark all 3 holes.
- Drill for your M12 x 100mm fixings.
- Fix through all 3 holes, with the bolt heads down in the recesses.
Which part do you need?
| Your situation | Choose |
|---|---|
| The end of a run, in black | This end section, 2 per run |
| The black sections for the middle of the run | Black middle section |
| The same end in yellow | Yellow end section |
| The end of an 1830mm one piece bump | Rubber end cap |
Care
Check the fixings regularly and tighten any that work loose, and replace the end section if the rubber splits or lifts.
Frequently asked questions
How many do I need?
Two per run, one at each end, however many middle sections you use.
Are fixings included?
No. Each end section needs 3 M12 x 100mm fixings. For concrete, use an M12 x 100mm through stud. For tarmac, use an M12 x 100mm rubber sleeve fixing.
Does it lock to the middle section?
No pegs or joints are shown on these sections. Each one bolts down on its own, butted up to the next.
Ordering and delivery
Add the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
