-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
This 1800mm backless steel bench is built for the places where seating takes a beating: school playgrounds, park paths, town-centre squares, business parks and hospital grounds. The seat is a run of rectangular box-section steel slats running the full length, with the two outer slats angled down along each long edge, carried on just two round steel posts set 1000mm apart. With no back or arms, people can sit from either side. You choose the finish (plain galvanised, galvanised and powder coated in one of seven RAL colours, or brushed grade 304 stainless steel) and the fixing: cast in for a permanent installation, or bolt down onto an existing concrete base.
Why it works
All-steel, fully welded construction
The bench arrives fully welded, so there are no loose seat fixings to work free or be tampered with. Galvanising gives a zinc coating that keeps protecting the steel where the surface gets scratched.
Box-section slats with angled outer edges
Box-section slats are stiff along their length and leave a gap between each one, so rain runs straight through. Turning the outer slats down softens the front and back edges. Slat ends are closed with plastic end caps on galvanised and coated benches.
Two-post layout
Two posts with about 400mm of seat overhanging each keep the footprint small, make sweeping round the bench easy and mean only two holes or base plates to set out.
- Overall size 1800 x 470 x 459mm, seat height 459mm
- Galvanised, galvanised and RAL powder coated, or stainless steel grade 304
- Cast in (300mm below ground) or bolt down on 133mm round flange plates
- Supplied fully welded and ready to install
Where it's used
Local authorities, schools, facilities managers and landscaping contractors use it on playground edges, park and riverside paths, pedestrianised high streets, business park landscaping, university courtyards, seafront promenades and hospital gardens.
Specifications
| Overall dimensions (L x W x H) | 1800 x 470 x 459mm |
|---|---|
| Seat height | 459mm |
| Leg centres | 1000mm (from the manufacturer's drawing) |
| Seat | Rectangular box-section steel slats, outer slats angled down; slat section size not published for this line |
| Back / arms | None (backless) |
| Number of seats | Not published for this line |
| Material | Galvanised mild steel, or stainless steel grade 304 |
| Finishes | Galvanised; galvanised and powder coated in RAL 3020 Traffic Red, RAL 9005 Jet Black, RAL 1021 Colza Yellow, RAL 9010 Pure White, RAL 5017 Traffic Blue, RAL 6005 Moss Green or RAL 7001 Silver Grey; brushed stainless steel grade 304 |
| End caps | Plastic end caps (galvanised and galvanised and coated versions) |
| Cast in fixing | Legs set 300mm below ground in concrete |
| Bolt down fixing | Round flange plate 133mm diameter x 5mm; 6 x 12mm bolts per bench (bolts not included) |
| Weight | 38kg galvanised or galvanised and coated; 34kg stainless steel |
| Construction | Supplied fully welded |
| Guarantee | 12 months from the manufacturer when installed and used correctly |
Choosing the right option
Fixing. Choose cast in where you are laying new paving or can break out a hole: each leg goes 300mm into concrete and the finished bench has clean legs rising straight out of the surface, with nothing at ground level to trip on or tamper with. Choose bolt down where there is already a sound concrete slab or you may want to relocate the bench later; each leg sits on a 133mm round flange plate and the bench needs six 12mm bolts in total, which are not included.
Finish. Plain galvanised is the lowest-cost choice and weathers to a dull grey. Galvanised and powder coated gives you the same zinc protection with a colour on top: jet black and moss green blend into heritage streets and parks, while traffic red, blue and colza yellow suit schools and play areas where you want the seating to stand out. Brushed stainless steel grade 304 costs more but suits modern plazas and riverside schemes where the metal finish is part of the design. Powder-coated benches are made to order, so confirm your RAL colour before ordering.
Installation, use and care
Cast in versions need an excavated hole for each leg; set the bench level, concrete the legs to 300mm below finished ground and leave the concrete to cure fully before anyone sits on it. Bolt down versions must be bolted to an appropriate concrete surface with 12mm bolts. Clean off any concrete splashes straight after installation. Wash down periodically with water and mild detergent, and touch in deep scratches on coated benches.
Frequently asked questions
Are the fixing bolts included?
No. Bolt down benches need six 12mm bolts suited to your concrete base, supplied separately. Cast in benches need no bolts; the legs are concreted 300mm into the ground.
How many people does it seat?
A seating capacity is not published for this bench. It is 1800mm long and backless, so it can be used from either side.
Is it suitable for coastal sites?
Galvanised and coated finishes both protect the steel with zinc. At exposed seafront sites the stainless steel grade 304 option has no coating to maintain; talk to us about your site.
Ordering and delivery
Select your fixing and finish above and order online, or call 01744 520110 or email sales@industrialsuppliesco.co.uk for multi-bench quotes, project pricing and delivery to site. Prices include VAT. Lead time and delivery are confirmed when you order, and powder-coated benches are made to order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



















