-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you are specifying seating for a school playground, a park path, a town-centre square or the grounds of a hospital or business park, this backless steel bench is built for the job. It is a long, low, all-steel seat: five box-section slats running the full 1800mm length, carried on two pairs of round tubular legs, with nothing to rot, splinter or prise off. You choose how it is fixed (cast into the ground or bolted down to concrete) and how it is finished: plain galvanised, galvanised with one of seven RAL powder-coat colours, or brushed stainless steel grade 304. It arrives fully welded, ready to set or bolt in place.
Why it works
All-steel, fully welded construction
The seat slats and legs are welded into a single frame at the factory, so there are no loose fixings in the seat for anyone to work free. Fewer parts to tamper with means fewer call-outs on public sites.
Finishes chosen for outdoor life
The standard bench is galvanised mild steel, giving a hard-wearing, low-maintenance surface that suits parks, schools and transport areas. Galvanised and powder-coated versions add colour on top of that galvanised base to match existing street furniture or a school palette. Stainless steel grade 304 gives a brushed metallic finish for modern civic and campus schemes.
Open slats and no backrest
Without a backrest, the bench can be used from either side and works well in the middle of a space: along a sports pitch, in a corridor of planting or in a courtyard. The gaps between the slats let rainwater drain away quickly, and each slat end is closed with a plastic end cap.
- 1800mm long, 338mm deep, 460mm seat height
- Five box-section slats, four round legs at 1600mm centres
- Cast-in (300mm below ground) or bolt-down (two 500 x 75 x 5mm flange plates)
- Galvanised, galvanised + RAL colour, or stainless steel grade 304
Where it's used
Typical installations include school and nursery playgrounds, sports grounds and leisure centres, public parks and country parks, seafront promenades, pedestrianised town squares, business parks and office courtyards, hospital and care-home grounds, and university campuses.
Specifications
| Overall size | 1800mm long x 338mm wide x 460mm high |
|---|---|
| Seat height | 460mm |
| Seat | Five box-section steel slats with plastic end caps |
| Legs | Four round tubular legs, two at each end, 1600mm leg centres |
| Backrest / arms | None (backless) |
| Material | Galvanised mild steel, or stainless steel grade 304 |
| Finishes | Galvanised; galvanised and powder coated in RAL 3020 Traffic Red, RAL 9005 Jet Black, RAL 1021 Colza Yellow, RAL 9010 Pure White, RAL 5017 Traffic Blue, RAL 6005 Moss Green or RAL 7001 Silver Grey; brushed stainless steel grade 304 |
| Cast-in version | Legs extend 300mm below ground for setting in concrete |
| Bolt-down version | Two flange plates, 500 x 75 x 5mm; requires 8 x 12mm bolts (not supplied) |
| Weight | 33kg galvanised or galvanised and coloured; 30kg stainless steel |
| Construction | Supplied fully welded |
| Guarantee | 12 months, if installed and used correctly |
| Slat section, leg diameter, steel gauge, seating capacity, load rating | Not published for this line |
Choosing the right option
Fixing. Choose Cast In for new or soft landscaping, such as grass edges, gravel paths and new paving, where you can excavate. The legs are set 300mm into concrete for a clean look with no visible plates. Choose Bolt Down where there is an existing concrete slab or hardstanding you do not want to break out. Each end stands on a 500mm flange plate fixed with four 12mm bolts (eight per bench, not included).
Finish. Plain galvanised is the most economical and the most forgiving finish on busy sites. Pick a RAL colour where the bench needs to match other furniture or a corporate or school palette. Note that coloured benches are non-refundable once ordered. Stainless steel grade 304 suits prestige schemes and covered areas where a brushed metal look is wanted; it is the lightest version at 30kg.
Installation, use & care
For cast-in benches, excavate a hole for each leg, set the bench level and concrete the legs in to the 300mm depth. Clean off any concrete splashes straight away and allow the concrete to cure fully before the bench is used. For bolt-down benches, fix to a suitable concrete surface using 12mm bolts through the flange plates, typically sleeve or resin anchors chosen to suit the base. In use, wipe down periodically with mild soapy water and inspect fixings at routine site checks.
FAQs
Are fixing bolts included?
No. The bolt-down version needs 8 x 12mm bolts, which are not supplied. The cast-in version needs no bolts, only concrete.
How many people does it seat?
A seating capacity is not published for this line. It gives 1800mm of seat length.
Is the colour powder coated over bare steel?
No. Coloured versions are galvanised first and then powder coated to the RAL colour you select.
Can it be installed on grass?
Yes, choose the cast-in version and set the legs in concrete footings. The bolt-down version needs a solid concrete base.
Ordering & delivery
Select the fixing method and finish above and add to basket. Prices include VAT. For multiple benches, project quantities, delivery lead times or site questions, call us on 01744 520110 or email sales@industrialsuppliesco.co.uk and our team will help.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



















