-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
If you need to stop cars mounting a footpath, keep vehicles off a showroom forecourt or mark out a trolley bay without putting up a fence, this 90mm hooped perimeter barrier does the job. It is a single bent hoop of 90mm diameter galvanised steel tube with a 3mm wall. That is the heavy end of the hoop barrier range, for sites where a bumper is more likely than a trolley to hit it. You can have it bolted down to an existing slab on round flange plates, or concreted 300mm into the ground. Heights run from 500mm to 1000mm above ground and widths from 750mm to 2000mm, so you can match one barrier to a doorway or run a line of them along a whole frontage.
Why it works
Heavy 90mm tube for vehicle areas
A 90mm tube with a 3mm wall has far more stiffness than the 48mm and 60mm hoops sold for pedestrian guidance. When a slow-moving car touches it, the hoop holds its line rather than folding over, which is exactly what you want at the edge of a car park or in front of glazing.
Galvanised for outdoor life
The barrier is galvanised steel, so the zinc coating protects the tube from rust in an outdoor UK setting without repainting.
Open, low-profile design
Because it is a single hoop rather than a panel, it marks a boundary without blocking sightlines. That is why you see these barriers outside car showrooms. They protect the display vehicles while customers can still see every car from the road.
- 90mm x 3mm galvanised steel tube
- Bolt down on 180 x 5mm round flange plates, or concrete in to 300mm
- 10 height and width combinations from 500 x 750mm to 1000 x 2000mm
Where it's used
Typical installations include car showroom and dealership forecourts, footpath edges beside car parks, retail and supermarket trolley parks, and the fronts of shops, offices and industrial units. They also guard entrances, fire exits and utility boxes. Run several in a line to mark a perimeter while keeping it open to pedestrians.
Specifications
| Tube diameter | 90mm |
|---|---|
| Wall thickness | 3mm |
| Material / finish | Galvanised steel |
| Height above ground | 500mm, 750mm or 1000mm |
| Overall width | 750mm (500mm high only), 1000mm, 1500mm or 2000mm |
| Bolt-down fixing | Round flange plate 180mm x 5mm on each leg; 6 bolts required per barrier (bolts not included) |
| Concrete-in fixing | 300mm below ground, supplied with welded fixing spikes for anchorage |
| Weight | 500 x 750: 12kg · 500 x 1000: 14kg · 500 x 1500: 17kg · 500 x 2000: 20kg · 750 x 1000: 17kg · 750 x 1500: 20kg · 750 x 2000: 24kg · 1000 x 1000: 20kg · 1000 x 1500: 24kg · 1000 x 2000: 27kg |
| Impact rating | Not published for this line |
| Guarantee | 12 months when installed and used correctly |
Choosing the right option
Fixing. Choose bolt down when you already have a sound concrete slab and want a quick fit without digging. The round flange plates take three bolts each. Choose concrete in when you are laying new surfacing, or the ground is tarmac or block paving over a weak base. Setting the legs 300mm into a concrete foundation gives the firmest anchorage and leaves nothing on the surface to trip over or tamper with.
Height. 500mm is the usual choice for marking a kerb line or trolley park while keeping a low profile. 750mm is easier to see from a driver's seat. 1000mm suits pedestrian-facing frontages where people might walk into a lower hoop.
Width. Measure the gap you are protecting and leave enough room between barriers for pushchairs and wheelchairs. The 750mm width is only made at 500mm high, in the concrete-in version.
Installation, use and care
Bolt-down barriers must be fixed to a suitable concrete surface with six anchor bolts sized for your slab (bolts are not included). Concrete-in barriers need an excavated hole at each leg so that 300mm of the leg sits below ground in concrete. Check the legs are plumb and allow the concrete to cure before the area takes traffic. Galvanised steel needs no painting. Wash off road salt and dirt now and then, and check bolt-down fixings stay tight.
Frequently asked questions
Are fixing bolts included with the bolt-down version?
No. Each bolt-down barrier needs six bolts, three per round flange plate, chosen to suit your concrete.
Is the height measured from the ground?
Yes. Heights of 500, 750 and 1000mm are measured above finished ground level. On concrete-in barriers, a further 300mm of each leg is set below ground.
Can I get a coloured or stainless steel version?
This listing covers the galvanised finish. Colour-coated and stainless steel versions are made to order. Call or email us for a quote.
Will it stop a vehicle travelling at speed?
No impact rating is published for this barrier. It is designed to deter and stop low-speed parking contact, not as a crash-rated or hostile vehicle mitigation barrier.
Ordering and delivery
Choose your fixing and size above and add the quantity you need for the run. For long perimeter runs, coloured finishes or advice on spacing and anchors, call us on 01744 520110 or email sales@industrialsuppliesco.co.uk. We will confirm lead time and delivery to your site when you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



