-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A 48mm hooped perimeter barrier is the simplest way to stop cars mounting a footpath, cutting across a verge or nosing up to a shop window, without walling the site off. This listing covers the lightweight 48mm tube in two finishes: galvanised steel for car parks, yards and trading estates, and brushed grade 304 stainless steel where the barrier sits in full view of customers. Pick the height, the overall width and the fixing that suits your ground, and every combination is priced individually below.
Why it works
A hoop, not a post
One continuous bent tube covers the gap of two or three bollards, so you mark a boundary with fewer fixings and nothing for a driver to squeeze between. The rounded top corners leave no sharp ends at knee height, which matters on busy walkways.
Two finishes, two jobs
The galvanised version uses a 3mm wall, giving a tougher section for car park edges and service yards where scuffs are expected. The stainless version uses 2mm grade 304 tube with a brushed finish; it is chosen for appearance at showroom forecourts, office entrances and retail frontages, and it keeps that look without painting.
Low visual weight
At 48mm diameter the barrier guards a frontage without hiding it. That is why hoops like this are a fixture outside car showrooms: they protect the cars on display and still let customers see them.
- 48mm tube, 500, 750 or 1000mm high, 500 to 2000mm wide
- Galvanised (3mm wall) or brushed stainless grade 304 (2mm wall)
- Concrete in, bolt down or removable, with an optional horizontal rail
Where it's used
Car showroom forecourts, retail park walkways, supermarket trolley bays, office and hotel entrances, delivery doors and roller shutters, landscaped verges, cycle and motorcycle areas, and the edges of private car parks. The horizontal-rail version is the usual choice for trolley bays and for anywhere small children or wheeled bins could pass underneath a plain hoop.
Specifications
| Tube diameter | 48mm |
|---|---|
| Wall thickness | 3mm (galvanised); 2mm (stainless steel) |
| Stainless grade and finish | Grade 304, brushed |
| Height above ground | 500mm, 750mm or 1000mm |
| Overall width | 500mm (500mm high only), 1000mm, 1500mm, 2000mm |
| Concrete in | Legs set 300mm below ground; galvanised legs have welded fixing spikes |
| Bolt down | Round flange plate per leg: 133 x 5mm (galvanised), 120 x 5mm (stainless); 6 bolts required per barrier, not included |
| Removable (galvanised) | Lifts out of two ground sockets set in concrete; padlock not included; 1000, 1500 or 2000mm wide |
| Horizontal rail | Optional on fixed barriers; rail height not published |
| Weight | 5 to 14kg plain, 7 to 20kg with rail, 15 to 22kg removable, depending on size |
| Guarantee | 12 months when installed and used correctly |
| Origin | British made, made to order |
Choosing the right option
Finish. Galvanised is the practical, lower-cost choice for car parks and industrial sites. Stainless costs more but suits frontages where looks matter; note its wall is thinner, so it is a deterrent and marker rather than a heavy impact guard.
Height. 500mm reads as a kerb-line marker and keeps sightlines clear. 750mm is the common all-rounder. 1000mm is easier for pedestrians to see and suits doorways and trolley bays.
Width. Measure the gap you need to close. 1000 to 1500mm covers a typical doorway or verge corner; 2000mm spans a parking bay frontage with only two fixing points.
Fixing. Concrete in gives the firmest result where you can dig. Bolt down suits existing sound concrete slabs and can be lifted later. Removable is for routes that must open occasionally, such as fire or maintenance access; it is offered in galvanised only on this listing.
Installation, use and care
Concrete-in barriers need two holes taking the legs 300mm below ground, set in concrete and checked for level before it cures. Bolt-down barriers need a sound concrete surface and six suitable anchors (three per plate), which are not included. Removable barriers need the two sockets concreted flush in excavated holes; lift the hoop out and close the socket lids when access is needed. Rinse stainless with clean water a few times a year near roads treated with salt; galvanising needs no routine treatment.
FAQ
Are fixing bolts included with the bolt-down version?
No. Each barrier needs six bolts, three per round flange plate. Choose anchors to suit your slab; we can advise on a suitable type if you send us details of the surface.
Can I fit this on tarmac or block paving?
Bolt down only into sound concrete. On tarmac, block paving or soft ground, choose the concrete-in fixing so each leg sits in its own concrete footing.
Is the stainless steel version suitable outdoors?
Yes. It is grade 304 with a brushed finish, widely used outside showrooms and shop fronts. Occasional washing keeps road salt and grime from marking the surface.
Can I order other sizes or a colour finish?
The sizes listed are the standard range. Colour coating and combinations not shown here, such as a stainless removable barrier, are not on this listing; call us and we will check availability.
Ordering and delivery
Each barrier is made to order and delivered to your site. For project quantities, a site-specific mix of sizes or help choosing a fixing, call 01744 520110 or email sales@industrialsuppliesco.co.uk with your measurements and we will put a quote together.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.









