Google Top Quality Store — Verified Exceptional Shopping Experience

316 Stainless Steel Adjustable Elbow for 42.4 x 2.0mm Handrail Tube, Satin


Price:
Sale price£47.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

A 316 stainless adjustable elbow that bends a 42.4mm handrail to any angle, for tube with a 2.0mm wall. Two knuckle halves turn on an M8 countersunk pivot screw, so one fitting takes the rail from a level landing down onto the slope of a stair, or round the change of pitch at the bottom of a flight, without cutting angled mitres. A 20mm spigot on each end pushes into the tube bore and the body is the same 42.4mm as the tube, so the joint stays flush. The price shown is for one elbow, with a minimum order of 2.

Dimension drawing of the 316 adjustable elbow for 42.4 x 2.0mm tube: 20mm spigots each side of a 53.6mm body, 46.8mm from the pivot to the end of a spigot, M8 x 35mm countersunk pivot screw, spigots 38.4mm across with a 34mm bore

What you get

Sold as One adjustable elbow, minimum order 2
Parts Two knuckle halves with push-in spigots, M8 x 35mm countersunk pivot screw, 316 stainless, satin
Not included The tube, adhesive or weld

Why choose this elbow

Fits any stair pitch. Set the angle on site to match the stair, so there is no need to measure and cut angled joints in the workshop, and small differences between flights take care of themselves.

Flush with the tube. The body is 42.4mm, the same as the rail, so the knuckle reads as a neat part of the handrail and there is no step under the hand.

Made for 2.0mm wall tube. The 38.4mm spigots fit the bore of 42.4 x 2.0mm tube closely, ready to bond or tack weld.

316 for exposed sites. Grade 316 resists salt and chlorine much better than 304, so this elbow suits outdoor ramps and stairs, the coast and pool surrounds. For dry indoor rails the 304 adjustable elbow for 42.4 x 2.0mm tube does the same job for less.

Where it is used

Handrails on stairs and access ramps in public buildings, offices and schools, and outdoor rails at seafronts, pool surrounds and roof terraces, wherever the rail changes slope.

Specifications

Material 316 stainless steel, satin finish
Fits 42.4mm tube with a 2.0mm wall
Angle Adjustable on the pivot
Length when straight 93.6mm: 53.6mm body with a 20mm spigot each end
Pivot M8 x 35mm countersunk screw, 46.8mm from the end of a spigot
Spigots 20mm long, 38.4mm across, 34mm bore
Weight About 0.39 kg

Is this the right elbow?

Your job Choose
Rail changing slope, 42.4 x 2.0mm, 316 This 316 adjustable elbow
Rail changing slope, 42.4 x 2.0mm, indoors 304 adjustable elbow 42.4 x 2.0mm
Rail changing slope, 48.3 x 2.0mm 316 adjustable elbow 48.3 x 2.0mm
Square 90 degree corner, 42.4 x 2.0mm 316 acute elbow 42.4 x 2.0mm
Rounded 90 degree corner, 42.4 x 2.0mm 316 radiused elbow 42.4 x 2.0mm

Fitting

Cut the tube ends square and deburr the bore. Push the spigots into the two tubes, set the elbow to the angle of the stair and tighten the M8 pivot screw. Then fix each spigot with a structural adhesive suitable for stainless steel, or tack weld round each joint and dress the weld back along the grain. Support the rail until any adhesive has cured.

Care

Outdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.

Frequently asked questions

Is the price for one elbow?

Yes, one adjustable elbow with its pivot screw, with a minimum order of 2.

Where is it used?

Mainly where a rail changes slope, such as at the top and bottom of a stair flight where the landing rail meets the sloping rail.

Will it fit 48.3mm tube?

No. It is sized for 42.4 x 2.0mm tube. Use the 48.3mm adjustable elbow instead.

Does the angle stay fixed?

Tighten the pivot screw once the angle is set, then bond or weld the joints so the rail is rigid.

Ordering and delivery

Order 2 or more online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full stair handrail with tube, elbows, brackets and ends, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

316 Stainless Steel Adjustable Elbow for 42.4 x 2.0mm Handrail Tube, Satin

£47.90 Inc. Vat

You may also like

Recently viewed