-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
Pegs only hold a gazebo if they go in straight and to their full depth, and that is hard to do with a shoe heel or a spare bit of timber. This 23oz rubber mallet is sized for exactly that job. It has enough weight to drive gazebo pegs, tie-down stakes and guy-rope pins into grass and soft ground, and its rubber head will not chip a powder-coated foot plate. Keep it in the gazebo bag with your tie-down kit and setting up on a field takes minutes, not a search for something heavy. It suits market traders, event crews, schools, clubs and anyone who pitches a pop-up shelter on grass.
Why it works
A rubber head that spreads the blow
The double-faced head is moulded in black rubber with a waisted barrel, so either end can strike. Rubber flexes a little on impact. That spreads the force across the peg head, so pegs are less likely to bend or mushroom than under a steel hammer, and a glancing blow will not dent the foot plate or chip the frame's powder coat.
Weight that does the work
At 23oz, about 650g, the mallet carries enough momentum to sink a standard gazebo peg into turf in a few firm strokes without much effort from your arm. It is heavier than the lightweight plastic mallets bundled with camping kits and easier to handle at the end of a long day than a lump hammer.
A handle built for grip
The metal handle has open lattice sections either side of a black rubber spine, which keeps it light in the hand. A ribbed rubber grip stops the mallet turning in a wet or gloved hand. The open metal loop at the end lets you hang it on a hook or clip it to a kit bag.
- 23oz (approx. 650g) mallet
- Double-faced black rubber head
- Lattice metal handle with ribbed rubber grip and hanging loop
Where it's used
Pitching pop-up gazebos and market stalls on grass at fetes, farmers' markets and car boot sales; pegging shelters at sports days, horse shows and club events; setting tie-down stakes for event marquees and catering tents; and general pegging jobs around the garden, campsite or allotment, from tent pegs to ground sheets and netting.
Specifications
| Product | 23oz mallet |
|---|---|
| Weight | 23oz (approx. 650g); the supplier does not say whether this is head-only or overall |
| Head | Black rubber, double-faced, waisted barrel |
| Handle | Metal with open lattice sections, black rubber overmould and ribbed rubber grip |
| Handle end | Open metal loop |
| Overall length | Not published for this line |
| Head diameter | Not published for this line |
| Handle alloy and rubber compound | Not published for this line |
| Supplied as | One mallet; pegs, stakes and gazebo not included |
Choosing the right option
This mallet comes in one size and weight, so the real choice is how you anchor your gazebo. On grass, soil or sand, pegs or a tie-down kit hold best, and this mallet is the tool to drive them. On paving, tarmac, concrete or indoor floors you cannot peg at all; use leg weights such as sandbags or solid weight plates on every leg instead. For exposed or windy sites, combine pegged foot plates, guy ropes staked out at an angle and leg weights. If your ground is hard-packed clay or stony, a rubber mallet will bounce. A heavier steel lump hammer and longer steel stakes suit those conditions better, so do not rely on this mallet alone.
Installation, use and care
Hold the peg at about 45 degrees, angled away from the gazebo leg, and start it with light taps before striking firmly with the flat face of the head. Keep your fingers clear of the strike zone, and wear gloves on long set-ups. To remove pegs, tap them sideways to loosen them before pulling. Wipe mud off the head and grip after use and store the mallet dry, out of direct sun, so the rubber does not harden or crack.
Frequently asked questions
Will it drive the pegs supplied with my gazebo?
Yes. It is intended for standard gazebo pegs, tie-down stakes and guy-rope pins in grass and soft ground. Very long steel stakes in hard ground need a steel lump hammer.
Will the rubber head mark my gazebo frame?
Rubber is far kinder to powder coat than steel. A black rubber head can leave faint scuffs on white surfaces, which normally wipe off.
Can I use it on concrete or tarmac?
The mallet will not damage hard surfaces, but you cannot peg into them. Use leg weights on hard standing.
Are pegs included?
No, this listing is for the mallet only. Pegs and tie-down kits are sold separately.
Ordering and delivery
The price shown is for one 23oz mallet including VAT. It is supplied new and delivered by courier, with the cost and estimated delivery date shown at checkout. Ordering mallets for a fleet of gazebos or an event team? Add the quantity you need to your basket, or contact us for larger orders.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


