Google Top Quality Store — Verified Exceptional Shopping Experience

316 Stainless Steel Handrail Bracket with Flat Saddle for Timber Rails, 80mm Projection


Price:
Sale price£14.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

A 316 stainless wall bracket with a flat saddle, made to carry a timber or other flat-bottomed handrail. A 60mm round plate screws to the wall, a 12mm round bar arm comes out 80mm and turns up, and the rail sits on a flat 63 x 25mm saddle and is screwed to it from below. It is the classic way to fix an oak, ash or hardwood handrail to a wall on stairs, landings and steps. Satin 316 suits outdoor, coastal and pool-side work as well as indoors. The price shown is for one bracket, minimum order 5.

Dimension drawing of the 316 handrail bracket with flat saddle: 60mm round wall plate 5mm thick with three 5mm holes on a 42mm circle, 12mm round bar, 80mm wall to saddle centre, 65mm to the saddle top, flat saddle 63 x 25 x 4mm with two 6mm holes at 42mm

What you get

Sold as One bracket, minimum order 5
Bracket Round wall plate, bent 12mm round bar arm and flat saddle, 316 stainless, satin
Not included The handrail, wall fixings and the screws into the rail

Why choose this bracket

Made for timber rails. The saddle is flat, so a wooden rail with a flat underside sits on it fully and screws down tight. A curved saddle made for round tube would only touch a timber rail along a line.

Room for your hand. The arm brings the rail 80mm off the wall, so fingers can wrap round the rail without catching the wall.

316 for anywhere. 316 stainless contains molybdenum, which gives it much better resistance to salt, chlorine and damp than 304, so it suits outdoor steps, coastal homes and pool areas as well as indoor stairs. For indoor-only work the 304 flat saddle bracket costs less.

Specifications

Material 316 stainless steel, satin finish
Wall plate 60mm round, 5mm thick, three 5mm holes on a 42mm circle
Arm 12mm round bar
Wall to saddle centre 80mm
Plate centre to top of saddle 65mm
Saddle Flat, 63 x 25 x 4mm, two 6mm holes at 42mm centres
Weight About 0.26 kg

Is this the right bracket?

Your rail Choose
Timber or flat-bottomed rail, indoors or out This 316 flat saddle bracket
Timber or flat-bottomed rail, indoors only 304 flat saddle bracket
42.4mm round stainless rail, outdoors 316 bracket for 42.4mm rail
42.4mm round stainless rail, indoors 304 bracket for 42.4mm rail

Fitting

Mark a line on the wall for the top of the rail, allowing for the saddle height. Fix the end brackets first, then the rest at even spacing, usually no more than about 1 metre apart, with three screws and plugs or anchors suited to the wall. Lay the rail on the saddles and fix it from below with two wood screws per bracket through the saddle holes. On a stair the rail sits at the pitch of the stair on each flat saddle.

Safety. Handrail height, bracket spacing and fixings must suit the stair and the wall, to Approved Document K and BS 6180 where they apply.

Care

Wipe with warm soapy water and a soft cloth along the grain, then dry. Outdoors, rinse with fresh water now and then, more often near the sea or a pool. Avoid chlorine bleach, wire wool and scouring pads.

Frequently asked questions

Is the price for one bracket?

Yes, one bracket. The minimum order is 5, enough for a typical flight of stairs.

Can I use it with a round stainless tube?

It will hold one, but a round tube only touches the flat saddle along a line. For 42.4mm tube use a bracket with a curved saddle.

Are screws included?

No. Use three wall screws and plugs or anchors to suit your wall, and two wood screws into the rail.

Can I use it outside?

Yes, that is what 316 is for. Rinse it with fresh water now and then.

Ordering and delivery

Order online in any quantity from 5, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail with brackets and rail, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

316 Stainless Steel Handrail Bracket with Flat Saddle for Timber Rails, 80mm Projection

£14.90 Inc. Vat

You may also like

Recently viewed