Google Top Quality Store — Verified Exceptional Shopping Experience

316 Stainless Steel Glass-to-Glass Clamp 180 Degrees for 8mm and 10mm Glass


Price:
Sale price£25.90
Inc. Vat

Express UK Delivery (2 Working Days)

In stock, ready to ship

Trusted by Industry Professionals

Description

A 316 stainless clamp that joins two frameless glass panels standing in a straight line. The oval body straddles the gap between the panels: the edge of one panel goes into each end, a 14mm web in the middle sets the gap, and two countersunk screws close the clamp onto both panes through rubber gaskets. Use two per joint, near the top and bottom, to tie a run of panels into one screen for pool fences, terraces, windbreaks and partitions. It takes 8mm or 10mm glass. The price shown is for one clamp.

Dimension drawing of the 316 glass-to-glass clamp 180 degrees: oval 106 x 44 x 27mm, 14mm web between the panes, safety pin holes 39mm either side of centre, two closing screws at 24mm centres, for 8 or 10mm glass

What you get

Sold as One clamp
Clamp Two-part oval body in 316 stainless, satin
Rubber gaskets Sets for 8mm and 10mm glass
Screws Two countersunk hex socket screws that close the clamp
Safety pins Two, optional, for use through 10mm holes in the glass
Not included The glass, and the channel or clamps that carry the panels

Why choose this clamp

Panels work together. A frameless panel on its own flexes at its free edges. Clamping neighbouring panels edge to edge turns a run of single panels into one stiffer screen.

Clean on one side. The screws are on one face only; the other face is plain brushed stainless, so you can turn the plain side towards the view, the pool or the street.

316 for outdoors. 316 stainless contains molybdenum, which gives it much better resistance to salt and chlorine than 304, so it suits pool fences, coastal terraces and windbreaks.

Specifications

Material 316 stainless steel, satin finish
Angle 180 degrees, two panels in a straight line
Glass 8mm or 10mm toughened, with the matching rubbers
Size 106mm long, 44mm tall, 27mm thick
Gap between panels 14mm, set by the centre web
Closing screws Two countersunk hex socket screws, 24mm apart
Safety pins Optional, 39mm either side of centre, through 10mm holes in the glass
Weight About 0.47 kg

Is this the right clamp?

Your joint Choose
Two panels in a straight line, joined along the edge This 180 degree clamp
Two panels at a right-angle corner 316 glass-to-glass clamp 90 degrees
Two panels in line, joined at the top edge, up to 12mm glass 316 mid glass clamp

Fitting

Install and level the glass panels first in their base channel or clamps, with a 14mm gap between them. Fit the rubbers for your glass thickness in both halves of the clamp. Place the halves either side of the joint so each panel edge sits fully in the clamp, fit the safety pins if the glass is drilled for them, and tighten the two countersunk screws evenly with a hex key until the glass is held firm. Do not over-tighten on the glass.

Safety. The clamps join the panels but do not hold the glass up. Use toughened or toughened laminated safety glass, and have the balustrade or fence, its glass and fixings designed and signed off by whoever is responsible for the job, to BS 6180 where it applies.

Care

Outdoors, rinse with fresh water and wipe along the grain every few weeks, more often near the sea or a pool, so salt and chlorine do not leave brown tea staining. Use warm soapy water; avoid chlorine bleach, wire wool and scouring pads.

Frequently asked questions

Is the price for one clamp?

Yes, one clamp with its rubbers, two screws and two safety pins. Most joints use two clamps.

Will it take 12mm glass?

No, it comes with rubbers for 8mm and 10mm glass.

Do I need to drill the glass?

Only if you use the optional safety pins, which need a 10mm hole in each panel, drilled before the glass is toughened.

Can it be used by a pool?

Yes, that is what 316 is for. Rinse it with fresh water now and then.

Ordering and delivery

Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full frameless glass fence or balustrade with clamps and fittings, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.

Our products have been used by

Logos are for illustrative purposes only and do not imply official endorsement

About Us

Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

316 Stainless Steel Glass-to-Glass Clamp 180 Degrees for 8mm and 10mm Glass

£25.90 Inc. Vat

You may also like

Recently viewed