316 Stainless Steel Glass Holder 50mm with 100mm Stud, for 8-16mm Glass, Flat Fixing, Satin

A heavy 316 stainless 50mm point fixing that stands a glass panel off a flat post, a wall or the edge of a slab. A 50mm satin cap on the face of the glass connects through a drilled hole to a 50mm round body 50mm long behind it, so the panel sits clear of the structure. A one piece 100mm threaded stud fixes the holder to the post or wall. Large 48mm washers either side cushion glass from 8mm to 16mm thick. The price shown is for one glass holder, with a minimum order of 2.

Why choose this glass holder

Stands the glass off the structure. The 50mm long body holds the panel well clear of a slab edge or wall, which suits side-fixed balustrades where the glass has to pass the floor edge.

Big bearing area for thick glass. The 50mm cap and 48mm washers spread the clamping load over a wide area of glass, which suits heavier panels better than a small 30mm holder.

A bold, frameless look. The plain 50mm satin cap is the only thing that shows on the outside of the glass, a strong detail that suits stairs, balconies and atriums.

316 for outdoors. 316 stainless resists salt and chlorine much better than 304, so it suits balconies, coastal homes and pool surrounds.

Single piece stud. The fixing is one 100mm length of 10mm threaded stud, as pictured.

Where it is used

Side-fixed glass balustrades on stairs, mezzanines and balconies; glass panels stood off a wall or stringer; and glass screens and feature panels in hotels, offices and public buildings.

Specifications

Is this the right glass holder?

Choosing the right option

The holder suits flat faces. Measure your glass thickness: 8mm to 16mm is covered by the holder. Have the glass drilled before it is toughened, with holes sized for the sleeve and matched to your fixing positions. Choose the stud to suit the structure and the depth of your fixing: this line is sold with a one piece 100mm stud or a two part 80mm and 40mm stud. Where the glass forms guarding, the panel size, glass type and fixings must be designed to suit the loads required, so ask your designer before you order.

Fitting and care

Drill and fix the stud into the post or wall with a suitable anchor or resin fixing, then screw the body on. Fit a washer, the sleeve and the glass, then the second washer, and screw the 50mm cap on hand tight plus a little, so the glass is held firmly without stressing it. Use at least two holders on each side of a panel. Outdoors, rinse with fresh water and wipe along the grain every few weeks. Use warm soapy water and avoid chlorine bleach, wire wool and scouring pads.

Frequently asked questions

Ordering and delivery

Order 2 or more online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For a full glass balustrade, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.