316 Stainless Steel Entrance Door Pull Handles 1200mm, Brushed Finish, Pair, Back to Back Fixing

A matched pair of 1200mm straight pull handles for a commercial entrance door, in brushed 316 stainless steel. One handle fits on each face of the door, bolted straight through it, so a single pair handles both sides. Each is a 32mm round bar standing 53mm off the door on two 25mm legs set 1005mm apart, and the fixing set of threaded studs, brass ferrules and an Allen key is supplied. The price shown is for the pair: two handles, not one.

Why use these handles

Sized for a busy doorway. A 1200mm bar gives a long grip that suits people of every height, and it stays comfortable to use with a full hand or with a bag on one arm.

Bolted through the door. Threaded studs pass right through the door and join the two handles back to back. That is far stronger than face fixing with wood screws, and it leaves no screw heads on show.

Grade 316 stainless. 316 resists salt air, rain and cleaning chemicals much better than 304, so these handles suit external entrances, coastal buildings and busy public doors. The brushed finish hides day to day finger marks better than a mirror polish.

Plenty of knuckle room. The bar stands 53mm off the door, which leaves clear space for a hand, even with gloves on.

Where they are used

Main entrance doors on offices, hotels, shopping centres, schools, universities, surgeries and restaurants, on glass, aluminium and solid timber doors, wherever a pull handle takes heavy daily use.

Specifications

Choosing the right option

Measure the door first. The studs are 85mm long and pass through the door between the two handles, so the door thickness has to suit that length. Thicker or thinner doors may need the studs changing or trimming, and the maximum door thickness is not published for this line, so call us with your door size if you are not sure. Glass doors must be drilled before toughening, so give your glass supplier the 1005mm hole centres from the drawing above. Check the hole sizes against the fixing set before the glass is ordered.

Fitting and care

Mark the two hole centres 1005mm apart in a plumb line on the door. On timber or aluminium doors, drill through from both faces to avoid breakout; glass must arrive ready drilled. Fit the studs and ferrules through the door, offer up one handle on each side and tighten them together with the Allen key, keeping the bars parallel and plumb. Do not overtighten on glass. Clean with warm soapy water and a soft cloth, wiping along the brushed grain, and rinse at coastal sites to wash off salt.

Frequently asked questions

Ordering and delivery

Order online with Express UK Delivery and same-day dispatch on orders before 2pm, Monday to Friday. For several doors or a matching set, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm the parts and delivery before you order.