-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A galvanised M12 corner kit for joining two estate fencing panels where the fence changes direction. Gate eyes bolt through the uprights of each panel, and a bolt through the two eye rings ties the panels together at the angle you need. Each kit has 6 gate eyes and 3 nut sets. The price shown is for one kit, with a minimum order of 5.
Why choose this kit
Corners without a special post. The eyes pivot around the connecting bolt, so two panels can be fixed together at a corner or a shallow bend without needing a post made to that exact angle.
Fully galvanised. The eyes and nuts are galvanised, to match galvanised estate fencing and stand up to being outdoors.
Simple stabilising fixings. The panels help to brace each other once they are joined, using nothing more than a spanner on site.
Adjustable reach. The eyes have a threaded M12 shank with nuts either side of the upright, so they can be set closer or further out to suit the gap.
Where it is used
Corners and changes of direction in estate fencing, parkland railings and paddock fencing, and anywhere two panels need tying together along a run that is not straight.
Specifications
| What you get | 6 gate eyes and 3 nut sets, minimum order 5 kits |
|---|---|
| Finish | Fully galvanised |
| Thread | M12 |
| Gate eye overall length | 73mm |
| Eye outside diameter | 28mm |
| Eye hole | 13mm |
| Nut across flats | 19mm |
| Nut thickness | 10mm |
| Weight | 0.25kg per kit |
The rest of the fence
| You want | Choose |
|---|---|
| To join panels at a corner | This one |
| A 2m round bar panel | 2m estate fencing panel, 16mm round bar |
| A 1m round bar panel | 1m estate fencing panel, 16mm round bar |
| Extra bracing for a run or end | Estate fencing back stay kit |
| A spike to hold a panel into the ground | 500mm estate fencing fixing spike |
Fitting the kit
- Stand the two panels in position at the angle you want, with their uprights close together.
- Pass a gate eye through a hole in each upright at the same height, and hold each one with its nuts on either side of the upright.
- Line up the two eye rings, one above the other, and pass a bolt through both.
- Fit the nut and tighten the connection.
- Repeat at the other heights, then check that the panels are upright before tightening everything fully.
Each kit makes up to three connections. Check that your panel uprights have suitable holes for an M12 thread before ordering. Dimensions are for guidance and components may vary slightly from the sizes shown.
Frequently asked questions
Is the price for a full kit?
Yes, one kit of 6 gate eyes and 3 nut sets. The minimum order is 5 kits. Call us for a price on larger quantities.
How many corners does one kit do?
One kit has enough eyes for three connections. Taller joins that need more connections, or several corners, need more kits.
Can it be used at any angle?
The eyes turn around the connecting bolt, so the join can follow a range of angles. Very tight angles depend on how close the uprights can get to each other.
Does this replace ground fixings?
No. It ties panels to each other. Use spikes, stays or base feet as needed to hold the fence to the ground.
Ordering and delivery
Order online, with Express UK Delivery to your site. For a larger job or a mixed order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Minimum order 5 pcs