Black Key Clamp Side Through Rail Support for 33.7mm Tube, Wall Handrail Bracket, Indoor, Size B

Name: Black Key Clamp Side Through Rail Support for 33.7mm Tube, Wall Handrail Bracket, Indoor, Size B
Brand: Industrial Supplies Co
SKU: SSHF-211267-01
Price: 7.9 GBP
Availability: InStock
Rating: 4.8 (26 reviews)

Share this product

Satisfaction Guaranteed.
Secure Payments
Refund policy
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk

A black wall bracket for 33.7mm tube: the tube passes straight through the ring, and the flat base screws to a wall, a panel or a kick plate. The ring sits on a short stem 57mm out from the base, so a handrail clears the wall comfortably, and one hex socket grub screw locks the tube at any point along its length. The base is 84 x 44mm with two 7mm screw holes at 64mm centres. Use it to hold a slim black handrail along a wall, tie a tube frame back to a wall, mount display panels, or fix a kick plate to guardrail uprights. The black electrophoretic finish is for indoor use. The price shown is for one support, with a minimum order of 10.

Dimension drawing of the black 33.7mm key clamp side through rail support, 57mm from base to tube centre with an 84 x 44mm base

Why fitters use it

The rail runs straight through. Unlike an end bracket, the tube passes through the ring, so one length of rail can be carried by as many supports as you need along a wall.

Clear of the wall. The 57mm stem holds the tube far enough out for a hand to grip the rail.

Firm, flat fixing. The wide base takes two screws, so the bracket stays square on plaster, timber or a steel kick plate.

Black to match black frames. It matches black key clamp tube and fittings for a clean, industrial look indoors.

Where it is used

Slim handrails along stairs, corridors and ramps inside cafés, shops, offices and homes; tying black tube shelving and display frames back to walls; mounting exhibition and display panels; and fixing kick plates to the uprights of indoor guardrails.

Specifications

What you get	One side through rail support, minimum order 10
Suits tube	33.7mm outside diameter (size B)
Base to tube centre	57mm
Base size	84 x 44mm, 7mm thick
Fixing holes	Two, 7mm, at 64mm centres
Grub screw	One hex socket screw
Material	Malleable cast iron
Finish	Black electrophoretic coat
Use	Indoor only
Weight	About 0.38 kg

How many do you need?

Use	Supports
Wall handrail, per metre of rail	1, plus 1 at each end
2m handrail	3
3m handrail	4
Tie-back for a tube frame	2 per frame, top and middle

Keep supports no more than 1 metre apart on a handrail, and finish the rail ends with end caps.

Choosing the right size

Key clamps are sized by the tube's outside diameter. 33.7mm tube is often sold as 1" or 25mm nominal bore. Measure across the tube before ordering: this fitting will not grip 26.9mm or 42.4mm tube. The same black fitting is made for 26.9mm tube.

Fitting and care

Mark the rail line on the wall, hold each support in place and mark the two holes. Drill and fix with screws and plugs to suit the wall (not included). Slide the rail through the rings, set it level and tighten each grub screw with a hex key. Wipe clean with a damp cloth and touch up chips with black paint. The electrophoretic coat is for indoor use only.

Frequently asked questions

Is the price for one support?

Yes. The price is for one support, with a minimum order of 10.

Are screws included?

No. Use screws and plugs to suit your wall through the two 7mm holes.

Does the rail pass through or end in it?

The rail passes straight through the ring, so supports can be fitted anywhere along one length of tube.

Can I use it outside?

No. The black electrophoretic finish is for indoor use. Use galvanised fittings outdoors.

Ordering and delivery

Order 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full handrail or mixed fittings, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.