-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
An ornate panel about 1020mm tall and 520mm wide, made from 10mm square bar scrolls around a twisted centre bar, with cast fleur-de-lis tips at the top and bottom, cast leaves near each end and a cast flower rosette at the centre. Pairs of C scrolls run down both sides, joined to the centre bar and to each other with small collars, and the whole design is symmetrical. Weld it into a side or garden gate as the centrepiece, set it into a railing, or fix it to a wall as a piece of decorative ironwork. It comes in raw mild steel, ready to weld, then paint, powder coat or galvanise. The price shown is for one panel.
Specifications
| Nominal size | 1020mm tall x 520mm wide x 10mm deep |
|---|---|
| Overall, tip to tip | About 1030 x 530mm measured across the outermost curls |
| Layout, top to bottom | 215mm, 130mm, 340mm centre, 130mm, 215mm |
| Scrolls | 10 x 10mm square bar, joined with collars |
| Centre bar | Twisted, with cast fleur-de-lis tips |
| Castings | Fleur-de-lis tips, leaves and a flower rosette |
| Material | Mild steel |
| Finish | Raw steel, not painted |
| Weight | About 9 kg |
| Sold as | One panel |
Why this panel works
Plenty of detail. The twisted centre bar, fleur-de-lis tips, leaves and flower give the texture of hand-forged work at a fraction of the cost.
Ready to fit. Every scroll is already formed and collared, so one panel turns a plain frame into a feature gate in an afternoon.
Symmetrical both ways. It mirrors left to right and top to bottom, so it can go in either way up and looks the same from both faces.
Lighter bar, lighter gate. At 10mm square and about 9 kg it adds less weight to a gate than heavier 16mm panels, easier on hinges and posts.
Where it is used
- The centre of side and garden gates
- Feature panels in railings and screens
- Wall-mounted decorative ironwork indoors and out
- Window grilles, room dividers and fire screens
Will it fit my gate?
| Your layout | What works |
|---|---|
| Gate frame opening | Allow about 1030mm tall and 530mm wide inside the frame to clear the outer curls |
| Plain bars either side | Stop the bars clear of the outer scrolls, or weld the scrolls to the nearest bar |
| Fixing to a wall | Weld small stand-off brackets to the centre bar so the panel sits clear of the wall and can be painted all round |
| A larger panel | See the 1100 x 515mm ornate panel with an acanthus leaf centre |
Fitting and finishing
Lay the frame flat, centre the panel and check it is square on both axes. Clamp, tack where the outer curls and fleur-de-lis tips touch the frame, recheck, then weld fully.
Raw steel will rust outdoors. Clean off the mill scale, prime with a zinc-rich primer, working it well into the twists, collars and castings, and top coat with a metal paint, or have the finished gate hot-dip galvanised or powder coated.
Is this the right panel?
| You want | Choose |
|---|---|
| 1020 x 520mm, fleur-de-lis and flower | This panel |
| Taller, with an acanthus leaf centre, 1100 x 515mm | Ornate scroll panel 1100 x 515mm |
| Wider and shorter, 840 x 610mm | Ornate panel 840 x 610mm |
| Squarer, 730 x 610mm | Ornate panel 730 x 610mm |
| A floral panel, 650 x 540mm | Floral panel 650 x 540mm |
Frequently asked questions
Is the price for one panel?
Yes, the price is for one ornate scroll panel.
Can it go outside?
Yes, once it is primed and painted, powder coated or galvanised. It is supplied as raw steel, so do not leave it outdoors unprotected.
Why two sizes?
1020 x 520mm is the nominal size. Measured tip to tip across the outermost curls it is about 1030 x 530mm, so allow for that when sizing a frame.
Can I cut it down?
Cutting the scrolls or castings will spoil the design. Size the frame to the panel instead, or choose a smaller panel.
Can it be galvanised?
Yes. It is mild steel and can be hot-dip galvanised with the finished gate.
Ordering and delivery
Order online for Express UK Delivery, with same-day dispatch on orders placed before 2pm, Monday to Friday. For several panels, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm stock and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
