Round Rose Panel 410mm Diameter, Hammered Edge Ring

Share this product

Satisfaction Guaranteed.
Secure Payments
Refund policy
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk

A round rose medallion for gates, railings and garden walls. This 410mm diameter panel has an outer ring of 12 x 6mm flat bar with a hammered edge, and an inner ring 260mm across. Eight pairs of curled C scrolls link the two rings, and inside the inner ring a small rose bush grows on branching stems, with four forged roses and pressed leaves. It is 50mm deep at the roses and weighs about 2.5kg. The outer ring gives a clean edge to weld to the bars of a gate or railing, and it makes a charming feature on a garden wall. It comes in raw steel, ready to fit and finish. The price shown is for one panel.

Dimension drawing of the 410mm diameter round rose panel with 12 x 6mm hammered-edge ring

Why fabricators use it

A neat size for gates. At 410mm across it sits comfortably in the middle of a pedestrian gate, covering about four bar spaces, without overwhelming it.

Easy to fit. The outer ring touches the bars at several points, so it welds on cleanly to the face of a gate or railing.

Real roses. Forged rose heads and pressed leaves give the panel depth, and look lovely with the roses picked out in red or pink after painting.

Mild steel takes any finish. Paint it, powder coat it or have it hot-dip galvanised so it matches the rest of the job.

Where it is used

Pedestrian and side gates, pairs of gates, railing feature bays, garden screens, trellis and arches, and garden, courtyard and summerhouse walls.

Specifications

What you get	One round rose panel
Diameter	410mm (inner ring 260mm)
Depth	50mm at the roses, 12mm at the ring
Ring bar	12 x 6mm flat, hammered edge
Centre	Rose bush with four forged roses and pressed leaves
Scrolls	Eight pairs of C scrolls between the rings
Material	Mild steel
Finish	Raw steel, unpainted
Weight	About 2.5 kg

How many do you need?

Use	Panels
Pedestrian gate	1
Pair of gates	2
Railing, feature bays	1 per bay
Wall feature	1 or a group of 3

Choosing the right panel

This panel suits a gate or bay at least 450mm wide. For a larger floral piece, compare:

See every design in our decorative panels range.

Stairs, landings and balconies in homes: the gaps in the guarding must not let a 100mm sphere pass. Welded to the face of a bar railing that already meets this, the panel only narrows the gaps.

Fitting and care

Offer the panel up and check the rose bush is upright. Tack the outer ring to the bars at three or four points, check it is central, then weld out and dress the welds. For a wall, fix through the outer ring with stainless screws and plugs. Raw steel will rust if left bare, so finish it the same day or keep it dry. Outdoors, have it hot-dip galvanised, or degrease, prime with a zinc-rich or etch primer and top coat with metal paint.

Frequently asked questions

Is the price for one panel?

Yes. The price is for one round rose panel. For several gates or a larger job, call us for a price.

Which way up does it go?

The rose bush grows upwards from the bottom of the inner ring, so fit it with the stems at the bottom.

Is it painted or galvanised?

No. It is supplied as raw mild steel so you can finish it with the rest of the job.

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For several pieces, mixed parts or a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.