-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A full heraldic coat of arms in cast steel, the centrepiece for grand driveway gates and gate piers. This badge is 280mm tall and 270mm wide: a royal crown on top, a quartered shield with a small rampant lion and diamond pattern panels, and two rampant lions standing either side holding the shield, their tails curling out, all on a flat bar above a scrolled base with a ball at the centre. It is a solid casting of about 2.4 kg, about 19mm deep at the deepest relief, with a flat back for welding or studding. The price shown is for one badge.
Why choose this badge
A true centrepiece. At 280 x 270mm, about the size of a dinner plate, it reads clearly from the road and gives a pair of gates a single, formal focal point.
Deep, crisp detail. The crown, the lions' manes and the shield panels stand up to 19mm proud, so they pick out well when highlighted in gold over black.
Flat back, easy to fix. The back is flat across the shield and crown, which gives a big, even area to weld to a gate panel or to stud into stone.
Popular with customers. It is one of our best-reviewed cast ornaments, chosen for manors, country houses and estate entrances.
Where it is used
Centre panels of driveway and estate gates, gate piers and pillars, over doorways and archways, garden walls, railings, and heraldic or period-style features on houses and hotels.
Specifications
| What you get | One coat of arms badge |
|---|---|
| Design | Crown, quartered shield, two rampant lion supporters, scrolled base |
| Material | Cast mild steel |
| Finish | Raw, unpainted |
| Height | 280mm |
| Width | 270mm |
| Depth | About 19mm at the deepest relief |
| Back | Flat |
| Weight | About 2.4 kg |
| Fixing | Weld round the edge, or weld studs to the back |
The depth is measured from the side photo and rounded, so allow a few millimetres either way.
How to fix it
| Where it goes | How to fix it |
|---|---|
| Single gate panel or bars | Weld round the edge where it touches the bars, front and back |
| Pair of gates | Weld it to one leaf, close to the meeting stiles, so the gates still open |
| Brick or stone pier | Weld three or four threaded studs to the back and set them in resin anchors |
| Timber gate or door | Weld tabs to the back and screw through them with stainless coach screws |
Is this the right badge?
| You want | Choose |
|---|---|
| A full coat of arms with crown, shield and lions | This badge |
| A winged lion facing left, for a right-hand gate | Winged lion badge, right hand |
| A winged lion facing right, for a left-hand gate | Winged lion badge, left hand |
| A smaller lion head | Lion head badge |
| An ornate gothic centrepiece | Gothic centre piece badge |
| Every cast badge | All cast badges |
Fitting and care
Mark the centre of the gate or pier, clamp the badge in place, check it is upright with a level on the flat bar under the lions, tack it, check again, then weld out. At 2.4 kg it needs a full weld or studs, not adhesive. On a pair of gates, fix it to one leaf only so the gates can open.
Degrease, then prime with a zinc-rich or metal primer before painting. Black with the crown, lions and shield picked out in gold leaf or gold paint is the classic finish. Hot-dip galvanising before powder coating gives the longest life outdoors.
Frequently asked questions
Is the price for one badge?
Yes, it is for one coat of arms badge, 280 x 270mm.
Is it painted?
No. It is raw cast steel and will rust if left bare outdoors, so prime and paint it, or galvanise it, once it is fixed.
Is the back hollow?
No. The back is flat, with openings only between the lions' legs and tails, so it sits flat against a gate panel or wall.
Can it go across two gates?
It is one solid casting, so fix it to one leaf only. If you want it centred on a pair, set it on the leaf that opens least, close to the meeting stiles.
Are all the badges exactly the same?
They are cast from the same pattern, but cast parts vary by a millimetre or two and the surface texture varies slightly from one casting to the next.
Ordering and delivery
Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
