-
Satisfaction Guaranteed.
-
Secure Payments
- Refund policy
-
Need help? Call Us 01744 520 110 or email sales@industrialsuppliesco.co.uk
Description
A black section, so you can build a bump to your lane width. Each of these rubber sections is 500mm wide. Bolt as many as you need side by side, then finish the run with an end section at each end. The black cap and white chevrons make it easy to see in a car park or at a supermarket. It measures about 500 x 400 x 50mm and weighs about 8.5kg. The price is for one section.
Why this section works
Built to your width. Add or take away 500mm sections to fit the lane. A 3m run takes 5 middle sections and 2 end sections.
A solid colour cap. Commercial grade rubber is capped with solid black rubber, with white chevrons on top. The underside has moulded pockets, as the photo shows.
Four recessed fixings. One hole sits near each corner, for an M12 fixing with a 35mm recess, so the bolt head sits down in the rubber.
Where it is used
Use it in car parks and at supermarkets, on private service roads and at site entrances where you want drivers to slow down. It should be used with signs that warn drivers and tell them to reduce their speed.
Specifications
| What you get | One middle section, priced each. Fixings and end sections not included |
|---|---|
| Overall size | Approx 500 x 400 x 50mm |
| Weight | About 8.5kg |
| Material | Commercial grade rubber capped with solid black rubber |
| Fixing holes | 4, for M12 with a 35mm recess |
| Fixings for concrete | 4 x M12 x 100mm through stud |
| Fixings for tarmac | 4 x M12 x 100mm rubber sleeve fixing |
| Load rating | Not published for this line |
Sizes are approximate, as moulded rubber varies slightly.
How to fit it
- Clean the road and set out the whole run, square across the lane.
- Mark all 4 holes on each section.
- Drill for your M12 x 100mm fixings.
- Fix through all 4 holes, with the bolt heads down in the recesses.
- Put up warning signs.
Which part do you need?
| Your situation | Choose |
|---|---|
| A black middle section | This section |
| The rounded end of a black run | Black end section, 2 per run |
| A yellow section, on its own or to alternate | Yellow middle section |
| A one piece bump for light traffic | 1830mm rubber speed bump |
Care
Check the fixings regularly and tighten any that work loose, keep the bump clean so it stays easy to see, and replace any part that splits or lifts.
Frequently asked questions
How many sections do I need?
Measure the width to cover and take off 500mm for the two end sections, then divide the rest by 500mm. A 3m run takes 5 middle sections and 2 end sections.
Are fixings included?
No. Each section needs 4 M12 x 100mm fixings. For concrete, use an M12 x 100mm through stud. For tarmac, use an M12 x 100mm rubber sleeve fixing.
Can I mix black and yellow?
Yes, the two colours are the same size, so you can alternate them for a striped run using this and the yellow section.
Can I use it on a public road?
Speed bumps on public roads are controlled by the highway authority. This one is for private sites such as car parks, so check with the authority if the road is not yours.
Ordering and delivery
Add the number you need and check out online, with Express UK Delivery to your site. For a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.
Our products have been used by
Logos are for illustrative purposes only and do not imply official endorsement
About Us
Suppliers to Ministry of Defence, NATO, US Airforce and Most UK Councils, Schools, Universities, Hospitals & various Government departments
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
