230V Sliding Gate Automation Kit, Built-in Control and 433MHz Receiver, Gates up to 900kg

A compact 230V sliding gate operator with its control board and radio built in, for gates up to 900kg. The board carries an integrated 433MHz receiver, so the two remote controls in the kit work without a separate receiver module, and the limit switches are on board. In the box you get the motor with its digital control unit, a tuned antenna, one pair of photocells, two remotes and the manual release key. It is a good fit where you want one tidy unit at the side of the gate rather than a motor and a separate control box. Gear rack is not included and is bought to suit the travel of your gate. The price shown is for the complete kit.

Why this kit works

One unit to fit and wire. With the control board and receiver inside the motor there is no separate control box to mount or cable between, which saves time on site and leaves less on show at the entrance.

Encoder positioning. The encoder tracks where the gate is across its travel and also provides obstacle detection, so the motor knows when it has met a blockage rather than only when it reaches a limit.

Self locking and supervised. The operator holds the gate when it stops, and a controlled input for external safety devices lets you add photocells or edges and have them monitored.

Where it is used

Commercial yards, industrial units, farm and estate entrances and other single sliding leaves up to 900kg, particularly where a compact operator and a neat installation matter. It needs a level track, a concrete pad and the space for the gate to park.

Specifications

Choosing the right kit

This kit sits at the top of our 230V single-motor range at 900kg and differs from the 800kg kit in being a compact unit with a built-in 433MHz receiver. If the gate is heavier than 900kg or cycles constantly all day, compare it with a heavier 24V kit or the 2500kg drive listed below, and read the guidance on gate length.

This kit is 230V. On any gate over 3m long the guidance is to choose a 24V kit, because the work cycle time is more than double that of a 230V kit, which gives less chance of the motor overheating on a longer travel or a gate that is constantly opening and closing.

See the full range of gate automation.

Fitting and care

Bolt the operator to a level concrete pad clear of the gate path and fix the gear rack along the gate, setting the motor height so the gate's weight does not rest on the pinion. Set the limits, run the learning cycle and test every safety device. Mains connection should be made by a qualified electrician, and a powered gate must be commissioned by a competent person with a risk assessment for the site.

Check the rack fixings, pinion mesh and safety inputs at each service, and lock the manual release after any use.

Frequently asked questions

Ordering and delivery

Order online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.