Acoustic Soundproofing Rubber Sheet | Up to 96dB | 1.5-25mm Thick | Sound Deadening UK | Sold Per Metre

Acoustic Soundproofing Rubber Sheet

🔇 Up to 96dB  • PROFESSIONAL GRADE • UK STOCK

Stop Noise at the Source – Tested Performance Up to 96dB

This is dense rubber sheet for jobs where noise has to be dealt with at its source: machinery on factory floors, generators and pumps in plant rooms, partitions in commercial fit-outs and ductwork above ceilings. You buy it by the metre, cut it on site and fit it under, around or inside whatever is making the noise.

Choose Your Thickness – Match Your Noise Problem

Start with what you are treating, then pick the band. The price for your exact size shows when you select it in the size selector.

How It's Sold and How Much to Order

• Sold per linear metre: select your thickness, then enter the metres you need as your quantity, in whole metres.
• Width: 1.25m on every thickness in the size selector, and 3mm is also available 2.0m wide.
• Coverage: each metre at 1.25m wide covers 1.25m². Allow a little extra for trimming around machinery and fixings.
• Large areas and repeat site orders: call 01744 520110 or email sales@industrialsuppliesco.co.uk for a project quote.

Figures are rounded up to whole metres, before any allowance for trimming.

Why This Outperforms Standard Soundproofing

What the Sheet Does on a Noise Job

It adds weight to light structures. Stud partitions, ducts and steel guards let sound through because they are light and move easily. A dense layer makes them harder to move, so less noise passes through.

It separates machines from the building. Bolted straight to a slab, a machine shakes the structure and you hear it rooms away. A resilient layer between the two reduces how much of that movement gets across.

It deadens panels that drum. Thin casings and duct walls ring when the machine runs. Rubber bonded flat to the metal quietens them without adding much bulk.

What it will not do alone. It will not close an open gap, because sound takes the easiest route. If your complaint is echo inside a room, add soft absorbent panels alongside it.

Proven Applications

Technical Specifications

🔧 Simple Installation in 4 Steps

Checks that protect the result:

• Keep it continuous. A partly covered wall or guard leaves a path around the sheet, and noise also travels through adjoining floors, walls and ducts.
• Watch your fixings. A bolt straight through an isolating layer gives vibration a direct route into the floor. Ask the machine maker about isolated fixings if the machine must be bolted down.
• Leave cooling clear. Never cover vents, louvres or motor cooling routes when lining an enclosure.
• Give us the load. Load-bearing figures are not published for this line, so send us the machine weight and foot size before ordering for heavy plant.
• Measure before and after. Take sound level readings at the same point with the machine at the same load, as part of your wider noise risk assessment.

Frequently Asked Questions – Acoustic Soundproofing Rubber Sheet 96dB

What is the difference between 80dB and 96dB acoustic rubber sheet?

The 96dB-rated acoustic rubber sheet provides significantly greater noise reduction than the 80dB version. The 96dB rating means it can reduce sound levels by up to 96 decibels under optimal conditions — equivalent to reducing a jet engine noise to near silence. The 96dB sheet is thicker, denser, and more suitable for heavy industrial machinery isolation, professional recording studios, and commercial soundproofing projects where maximum acoustic performance is required.

Is this acoustic sheet sold per linear metre?

Yes — our 96dB acoustic rubber sheet is sold per linear metre, cut from a continuous roll. This means you only buy exactly the length you need, reducing waste and cost. Simply select your required length and thickness at checkout. The sheet width is standard, and cuts are made to the nearest whole metre.

What thicknesses are available for the 96dB rubber sheet?

The 96dB acoustic rubber sheet is available in thicknesses ranging from 1.5mm up to 25mm. Thinner sheets (1.5mm–3mm) are suitable for lightweight noise dampening and machinery lining. Mid-range (5mm–10mm) is ideal for floor underlays and wall panels. Maximum thickness (15mm–25mm) delivers the highest acoustic performance for heavy industrial isolation and recording studios.

Can I use acoustic rubber sheet on walls and ceilings?

Yes — acoustic rubber sheet can be applied to walls and ceilings as well as floors. For wall and ceiling applications, it is typically adhered using contact adhesive or screwed into place with washers to distribute load. The 96dB-rated sheet is particularly effective as a mass-loaded layer within stud walls and partition systems, blocking airborne sound transmission between rooms.

Is the acoustic rubber sheet fire retardant?

Our acoustic rubber sheet meets standard fire performance requirements for commercial and industrial use. For applications with specific fire safety regulations (such as public buildings or commercial premises), please contact us with your fire classification requirements and we can advise on the most appropriate specification. Standard rubber matting has a self-extinguishing property and does not contribute to flame spread under normal conditions.

How many metres do I need?

Divide your total area in m² by 1.25, or by 2.0 for the 3mm x 2.0m option, and round up to the next whole metre. A 12m² area at 1.25m wide needs 10 metres. Add a little more if you are cutting around machine feet or fixings.

Which thickness should I use under factory machinery?

For machinery mounting pads, look at the 10-15mm band. For industrial machinery isolation and extreme noise environments, look at 20-25mm. Send us the machine weight and foot size if you want us to check your choice before ordering.

Do you have Rw or density figures for a specification?

An Rw rating and kg/m² figures are not published for this line. If your project has a specified requirement, send it to sales@industrialsuppliesco.co.uk or call 01744 520110 before ordering so we can check it first.

Why Choose Our Acoustic Rubber?

Need more for heavy plant? See our heavy duty acoustic rubber sheet for industrial noise control.

Stop Noise Complaints Today

Choose your thickness, enter the metres you need as the quantity and add to cart. Orders go by Express UK delivery, with same-day dispatch before 2pm, Monday to Friday. The delivery charge is shown at checkout before you pay.