Yellow Key Clamp End Post Kit for 33.7mm Tube, 1100mm Two-Rail Guardrail Post, RAL 1023

The end post kit finishes a two-rail yellow key clamp guardrail with a neat, closed end, in high-visibility traffic yellow that stands out on a warehouse floor. It is everything for one 1100mm end post on 33.7mm tube: an oval base flange, a 1060mm length of post tube, a short tee at 550mm for the mid rail and a 90° elbow on top for the top rail. Both rails end at this post, the top rail turning down into the post through the elbow, so there are no open tube ends where people walk. Tube and fittings are powder coated yellow RAL 1023 and are made mainly for indoor use. It comes loose, ready for you to assemble with a hex key. The price shown is for one complete kit; rails and floor fixings are not included.

Why use the end post kit

Every part in one order. The base, post tube and both rail fittings come together, with the tube already cut to length, so there is nothing to measure or cut for the post.

Two rails, both ended safely. The elbow closes off the top rail and the short tee takes the end of the mid rail, so the guardrail finishes with smooth bends and no cut tube ends at hip or hand height.

Seen from across the floor. Traffic yellow marks the edge of a walkway, mezzanine or machine area clearly, and matches yellow line marking and racking protection.

Level with the rest of the run. The yellow end, mid and corner post kits all stand 1100mm overall with the mid rail at 550mm, so both rails run level from end to end.

Where it is used

The ends of pedestrian guardrails along warehouse and factory walkways, the open edges of mezzanine floors and platforms, guarding round machinery, plant and work cells, segregation between people and forklift routes, and edge protection round loading bays and pits indoors.

Specifications

Building a yellow two-rail guardrail

Spare parts are sold singly too: the oval base flange, short tee, 90° elbow and 1060mm post tube.

How many do you need?

Two end post kits for every separate run, one at each end. A run that ends against a wall needs only one; finish the other end with wall flanges. Space mid posts at up to 2 metre centres between them, and allow two lengths of rail tube for each bay, one top and one mid.

Choosing the right size

This kit takes 33.7mm outside diameter rail, often sold as 1" or 25mm nominal bore. For a heavier rail, use the yellow end post kit for 42.4mm tube. Keep every post, fitting and rail on one run the same tube size.

Fitting and care

Push the post tube into the oval base and tighten its grub screw. Slide the short tee on and set its centre 550mm above the floor, then fit the elbow on top so the overall height is 1100mm. Stand the post in place, mark the two holes in the base, drill and fix with anchors to suit the floor (not included). Push the rails fully into the elbow and the tee, level them and tighten every grub screw with a hex key. Check the anchors and screws after the first week and then once a year, and touch up chips with yellow RAL 1023 paint.

Outdoor note: the powder coat suits outdoor use, but the brass-coated grub screws will rust outside. If the guardrail is outdoors, coat the threads inside each fitting and the grub screws with matching yellow paint after fitting. For a long outdoor life, galvanised key clamp is the better choice.

Frequently asked questions

Ordering and delivery

Order online with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a full guardrail run, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.