Norton Thermal Bond V2100 Structural Glazing Spacer Tape

Norton Thermal Bond V2100 Structural Glazing Spacer Tape
Description:
Widely Used Spacer Tape in Structural Silicone Systems
The Load Bearing Open-Cell Structure Allows For Good Air and Moisture Flow, Promoting Optimum Silicone Cure
Semi-Rigid Polyurethane Foam is Compatible With All Tested Silicone Sealants
Low Thermal Conductivity Improves the Performance of the Wall
Excellent Resistance to Temperature Variations, Fungi and Oxidation

Thermalbond® V2100 is a SPACER material and not intended to be a structural component. The adhesive properties cannot be used as part of the permanent fastening system or in any way to reduce the amount of silicone adhesive recommended by the silicone manufacturer. Contact surfaces must be thoroughly cleaned. Position V2100 carefully, as it cannot be repositioned after initial contact. With some surfaces, it may be necessary to prime the surface with Norton Tite-R-Bond Adhesion Promoter.
Typical Properties
Density: 31 lbs./cu.ft. (497 kg/m³); Hardness: 35 durometer Shore A; Force to Compress 10%: 31 psi (214 (kPa); Tensile Strength: 180 psi (1241 kPa); Elongation: 125%; Temperature Range: Application 60°F (16°C) to 125°F (52°C); Service -40°F (-40°C) to 180°F (82°C).