Food Safe Kitchen Floor Paint – Hygienic Solvent-Free Epoxy Coating for Commercial Kitchens

Food Safe Kitchen Floor Paint is a high-performance commercial floor coating designed specifically for demanding food preparation environments where hygiene, durability, and safety are essential. This advanced protective coating provides a tough, easy-to-clean surface ideal for restaurants, commercial kitchens, food production areas, and industrial facilities.

Formulated with an integrated antibacterial and antimicrobial additive, this coating helps reduce the presence of unwanted germs and bacteria, supporting cleaner and more hygienic working environments. The durable resin-based formula creates a long-lasting protective layer that withstands heavy foot traffic, regular cleaning, spills, and everyday wear in busy kitchen environments.

Available with an optional anti-slip finish, this coating can help improve floor safety and provide enhanced slip resistance in areas where spills and moisture are common. Designed for professional use, it delivers a smooth, hard-wearing finish while maintaining excellent resistance against chemicals, oils, and general workplace demands.

Key Features & Benefits

• Designed for commercial kitchens and food-safe environments
• Antibacterial and antimicrobial protection
• Helps reduce bacteria and germ growth on coated surfaces
• Tested for long-lasting antimicrobial performance
• Durable resin-based floor protection system
• Excellent resistance to wear, spills, oils, and cleaning chemicals
• Suitable for heavy foot traffic areas
• Available with anti-slip properties for improved safety
• Easy-to-clean hygienic finish
• Suitable for restaurants, food processing areas, and industrial facilities
• Solvent-free formulation for a safer working environment
• Long-lasting coating designed for demanding applications

Coverage Rates

Coverage depends on surface condition, porosity, and application method.

• 1kg Pack: Covers approximately 3–4m² per coat
• 2.5kg Pack: Covers approximately 8–10m² per coat
• 5kg Pack: Covers approximately 17–20m² per coat
• 10kg Pack: Covers approximately 35–40m² per coat

Please note: Coverage rates are approximate and based on one coat. For optimum protection, durability, and finish, two coats are generally recommended.

Recommended Applications

Ideal for:

• Commercial kitchens
• Restaurants and cafés
• Food preparation areas
• Food production facilities
• Catering environments
• Breweries
• Industrial kitchens
• Warehouses
• Service areas
• Workshops
• Commercial flooring areas
• Hygienic processing environments

Suitable Substrates

Suitable for application on properly prepared:

• Concrete floors
• Cement screeds
• Existing compatible coatings
• Other suitable industrial flooring surfaces

Application Guide

Surface Preparation

Correct preparation is essential to achieve maximum adhesion and performance. Remove any loose, damaged, or flaking coatings before application. The surface should be mechanically abraded or sanded to create a suitable key for the coating.

After preparation, thoroughly sweep and vacuum the area to remove all dust, dirt, grease, and contaminants.

Priming Recommendations

• New or sound concrete floors: Apply a suitable damp-tolerant primer.
• Dusty, old, or weaker floors: Apply a suitable penetrating primer.
• Oil-contaminated floors: Thoroughly clean using an appropriate degreaser before applying an oil-tolerant primer.

Application Instructions

1. Mix the base component thoroughly before adding the curing component.
2. Add the second component and mix fully until a consistent mixture is achieved.
3. Transfer the mixed coating into a suitable paint tray.
4. Apply using a suitable epoxy roller, cutting in edges with a brush.
5. Apply the second coat once the first coat has cured and is no longer tacky (typically 12–24 hours).
6. Allow the coating to fully cure before introducing heavy traffic, water, or chemicals.

Technical Information

Important Information

• Not suitable for areas exposed to prolonged direct sunlight without additional UV protection.
• Not UV stable and may experience colour changes with regular sunlight exposure.
• Do not split coating components, as incorrect mixing ratios may affect curing performance.
• This coating is not self-levelling; proper surface preparation is required for the best results.
• Use a fresh roller sleeve for each coat to achieve the best finish.