Product Description

Transform your garage floor in just one day with this Fast Cure Epoxy Garage Floor Paint Bundle. Designed for rapid application and quick return to service, this complete coating system includes a fast-curing primer, two coats of high-performance epoxy paint and the essential tools required for application.

The industrial-strength epoxy formula creates a durable, professional high-gloss finish that can withstand vehicle traffic, heavy foot traffic, oil, petrol and everyday garage use. It is particularly suitable for projects completed during colder months or where minimum downtime is essential.

Key Features

• Complete fast cure garage floor coating kit
• Primer and two-coat epoxy paint system
• Allows same-day primer and paint application
• Garage can typically return to full service within 24–36 hours
• Highly durable and hardwearing finish
• Resistant to oil, petrol and common chemicals
• Suitable for heavy foot and vehicle traffic
• Up to five times thicker than standard garage floor paints
• Professional high-gloss appearance
• 100% solids epoxy resin formulation
• Suitable for DIY and professional applications
• Available in a wide range of colours
• Can be applied in lower temperatures than many standard epoxy systems

What Is Included?

• One coat of fast cure epoxy primer
• Two coats of fast cure epoxy garage floor paint
• Roller frame
• Roller sleeves
• Paint scuttle
• Mixing paddle
• Paint brushes
• Pair of disposable gloves

Product quantities will vary depending on the selected floor coverage.

Suitable Applications

This fast cure epoxy floor coating bundle is ideal for:

• Domestic garages
• Commercial garages
• Workshops
• Basements
• Storage rooms
• Utility areas
• Light industrial floors
• Vehicle storage areas
• Concrete workspaces

Suitable Surfaces

The coating can be applied to properly prepared:

• Bare concrete
• Cement screeds
• Wood
• Steel
• Previously painted floors with a suitable sound coating

Product Specification

• Finish: Professional high gloss
• Primer appearance: Clear, semi-gloss
• Composition: 100% solids epoxy resin
• Components: Two-part resin and activator system
• Primer recoat time at 20°C: Approximately 3 hours
• Paint recoat time at 20°C: Approximately 2.5 hours
• Primer drying time at 20°C: Approximately 2.5 hours
• Paint drying time at 20°C: Approximately 10–12 hours
• Typical return to full service: 24–36 hours
• Primer pot life: Approximately 20 minutes
• Paint pot life: Approximately 20 minutes
• Application tools: Roller or brush

Drying and curing times may vary depending on temperature, ventilation, surface condition and coating thickness.

Surface Preparation

Correct preparation is essential for achieving a strong and long-lasting finish.

Remove any loose, peeling or flaking paint before application. Existing sound coatings should be thoroughly sanded to create a mechanical key for the new coating.

For the best results, mechanically prepare concrete floors using grinding or shot blasting. Where mechanical preparation is not possible, thoroughly sanding or treating the surface with a suitable concrete etching and cleaning solution can provide an effective alternative.

After preparation:

1. Sweep and vacuum the entire floor.
2. Remove all dust, dirt, grease, oil and surface contamination.
3. Ensure the floor is clean, sound and dry.
4. Repair cracks, holes or damaged concrete before coating.
5. Confirm that the surface is suitable before mixing the product.

Application

Apply one coat of fast cure primer to the prepared floor. Allow the primer to reach the recommended recoat stage before applying the first coat of epoxy floor paint.

Apply two coats of fast cure epoxy paint using a suitable roller or brush. Mix only the quantity that can be applied within the stated pot life, as the product will begin to cure quickly once the resin and activator have been combined.

Maintain good ventilation throughout application and curing.

Important Information

• Always mix the resin and activator thoroughly before use.
• Do not mix more material than can be applied within approximately 20 minutes.
• Do not apply to damp, contaminated or poorly prepared surfaces.
• Application and curing times will increase in colder conditions.
• Ensure adequate ventilation during application.
• Allow the coating to cure fully before permitting vehicle traffic.
• Always follow the relevant technical and safety instructions.