{"product_id":"spring-loaded-gate-jockey-wheel-medium-120kg","title":"Spring Loaded Gate Jockey Wheel, Medium, 90mm Wheel, 120kg Load Bearing","description":"\u003cp\u003e\u003cstrong\u003eA sprung wheel that carries the free end of a swing gate.\u003c\/strong\u003e A gate is held only at its hinge side, so the free end wants to drop, and over time a heavy leaf pulls its post and hinges out of line. A jockey wheel takes that end of the gate onto the ground. The spring inside the bracket lets the wheel rise and fall over small changes in the surface, so it stays in contact without jamming. This medium model is published as load bearing 120kg. It has a 90mm blue wheel in a welded fork and a 40mm wide bracket with two fixing holes at 87mm centres. The price shown is for one jockey wheel.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/spring-loaded-gate-jockey-wheel-medium-120kg-drawing.jpg?width=1200\" alt=\"Drawing of the medium spring loaded gate jockey wheel, showing the bracket, spring and fixing hole centres\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a sprung jockey wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIt keeps weight off the hinges.\u003c\/strong\u003e The wheel shares the load of the free end of the gate, which is exactly where the leverage on the hinges is highest.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA close coiled spring takes up the movement.\u003c\/strong\u003e The tightly wound coil around the 16mm bar lets the wheel ride over small rises in the ground without lifting the gate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolts to the gate upright.\u003c\/strong\u003e The bracket fixes to the end of the leaf with two bolts, so there is no need to modify the gate frame beyond two holes.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSwing gates at contractors' compounds, farm yards, commercial yards and estates, where a gate is long enough or heavy enough to sag. It suits a medium leaf, and a heavier gate should use the 160kg model. It runs best on a firm surface, because any wheel sinks in soft ground.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne jockey wheel with spring, bracket and fork, as shown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad bearing\u003c\/th\u003e\n\u003ctd\u003e120kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003e90mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel colour\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel width\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross the fork\u003c\/th\u003e\n\u003ctd\u003e62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpindle\u003c\/th\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight, top of spindle to axle\u003c\/th\u003e\n\u003ctd\u003e327mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket height\u003c\/th\u003e\n\u003ctd\u003e163mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket width\u003c\/th\u003e\n\u003ctd\u003e40mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eTwo, 7mm, at 87mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFork body width\u003c\/th\u003e\n\u003ctd\u003e51mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGrey metal finish as shown, exact coating not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 2.37 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right jockey wheel\u003c\/h2\u003e\n\u003cp\u003eThe medium model is the lighter of the two: 120kg load bearing against 160kg, with a 16mm spindle against 25mm and a 40mm bracket. Both share the same 327mm height and the same 87mm hole spacing, so go up to the heavy model if the gate is anywhere near 120kg. If you would rather have a wheel that swivels, a swivel gate caster follows the gate rather than running in one direction.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eIf you need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e120kg load bearing\u003c\/td\u003e\n\u003ctd\u003eThis jockey wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA stop to hold the gate open\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavyweight-gravity-gate-stop\"\u003eHeavyweight gravity gate stop\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-gate-stops-wheels\"\u003egate wheels\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eHang and adjust the gate first, then fit the wheel towards the free end. Position the bracket on the end upright so that the wheel is touching the ground with some of the spring compressed, mark the two holes at 87mm centres, and bolt it on with fixings to suit your gate. Fixings are not published as included. Swing the gate through its full travel and check that the spring is not bottoming out or the wheel losing contact.\u003c\/p\u003e\n\u003cp\u003eKeep the axle bolt tight and check the wheel at each service. The wheel should turn freely. Replace it if it has worn flat or if the spring has gone soft.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one jockey wheel, with its spring, bracket and fork as shown.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat weight will it carry?\u003c\/summary\u003e\u003cp\u003eThe published figure is load bearing 120kg. That is the wheel's figure: the hinges, post and gate still have to suit the gate. If you are close to the figure, or unsure how it applies, call us before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the wheel swivel?\u003c\/summary\u003e\u003cp\u003eNo. It runs in a fixed fork and follows one direction, with the spring taking up changes in ground level. A swivel caster is the option if you want the wheel to turn.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I fix it?\u003c\/summary\u003e\u003cp\u003eThe bracket has two 7mm holes at 87mm centres. Bolts to suit your gate are not published as included, so allow for them.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254493036931,"sku":"SSHF-822211-01","price":75.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/spring-loaded-gate-jockey-wheel-medium-120kg-in-use.jpg?v=1794146189","url":"https:\/\/industrialsuppliesco.co.uk\/products\/spring-loaded-gate-jockey-wheel-medium-120kg","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}