{"product_id":"sliding-gate-wheel-60mm-round-groove-m10-axle-12mm-round-bar-track","title":"Sliding Gate Wheel 60mm, 14mm Round Groove for 12mm Round Bar Track, M10 Axle","description":"\u003cp\u003e\u003cstrong\u003eA 60mm wheel for a sliding gate running on 12mm and 16mm round bar track.\u003c\/strong\u003e The wheel is 58mm measured, with a half-round groove 14mm across and a rim 17mm wide, and a ball bearing in the hub. An M10 threaded axle bolt, with its nuts, comes with the wheel, so you fix it by bolting through the side of a channel or bracket under your gate's bottom rail. It is the wheel for a light gate only. No load rating is published for it, so match it to a gate of known weight or call us before you order. The price shown is for one wheel, with a minimum order of 10.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-gate-wheel-60mm-round-groove-m10-axle-12mm-round-bar-track-drawing.jpg?width=1200\" alt=\"Drawing of the 60mm sliding gate wheel with a round groove, showing the published dimensions\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA small wheel for a light gate.\u003c\/strong\u003e At 58mm measured and 0.29kg it is by far the lightest wheel in the range. The rim is only 17mm across, with a 14mm groove, so it suits a narrow bottom rail where the larger wheels would not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe groove holds the line.\u003c\/strong\u003e The half-round groove seats on the track and keeps the wheel from wandering, so the gate runs straight along the round bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA plain bearing hub.\u003c\/strong\u003e A ball bearing in the hub lets the wheel turn freely on the axle bolt. The number of bearings is not published, so do not treat this as a double bearing wheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolts straight on.\u003c\/strong\u003e The M10 axle bolt goes through the side of a channel or bracket and is held with its nut, so you can fit and replace it without welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlated against rust.\u003c\/strong\u003e The wheel and bolt are yellow zinc plated, not hot-dip galvanised.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eNarrow side gates, small yard and bin store gates, and light sliding screens on a round bar track. It also replaces a worn wheel of this size. It is not a wheel for a full size vehicle gate.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel, M10 axle bolt and nuts, minimum order 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003eSold as 60mm, 58mm measured on the data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eHalf-round groove, 14mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack\u003c\/th\u003e\n\u003ctd\u003eListed for 12mm and 16mm round bar track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim width overall\u003c\/th\u003e\n\u003ctd\u003e17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxle\u003c\/th\u003e\n\u003ctd\u003eM10 threaded bolt with nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength over the bolt\u003c\/th\u003e\n\u003ctd\u003e61mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eBolt-through, in a channel or bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eBall bearing in the hub, number of bearings not published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eYellow zinc plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum load\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.29 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose the groove first, because it must match your track. Then the fixing, then the diameter: a larger wheel rolls over grit more easily but needs more room under the rail.\u003c\/p\u003e\n\u003cp\u003eThis is the smallest wheel we list for a round bar track, and the only one with a 14mm groove. Every larger round groove wheel, from 80mm upwards, has a 20mm groove for 20mm track, so it will not swap with those. Moving up to the 80mm double bearing wheel gives a 78mm wheel, a 25mm rim and two bearings, on the same M10 axle size. If you would rather have a housing to fit in a box section rail than a through bolt, look at the 60mm housing wheel in the table.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eHow it differs\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e60mm round groove, M10 axle\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-internal-box-section-slider-wheel\"\u003e60mm round groove wheel in a box section housing\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eSame small size, housing instead of a through bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/12mm-mild-steel-round-bar-1m\"\u003e12mm mild steel round bar, 1m\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eBar for a 12mm track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/16mm-mild-steel-round-bar-1m\"\u003e16mm mild steel round bar, 1m\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eBar for a 16mm track, see the FAQ on fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eLay the track first, straight and level. Most sliding gates run on two wheels, set about a fifth of the gate length in from each end. Fix a channel or a bracket under your bottom rail and bolt the wheel through it, so the M10 axle bolt is supported on both sides of the wheel where you can. Because the axle is M10, the side of your bracket or channel needs a 10mm clearance hole. Check the 61mm bolt length suits your bracket before you drill. Check the gate runs its full travel without binding before you tighten up fully.\u003c\/p\u003e\n\u003cp\u003eKeep grit and leaves off the track, because that is what wears a wheel. Check the axle nuts and that the wheel runs freely at each service.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one wheel, and the minimum order is 10. Most sliding gates run on two wheels. For a larger job, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat track does it run on?\u003c\/summary\u003e\u003cp\u003eIt is listed to suit 12mm and 16mm round bar track. The groove measures 14mm across on the data sheet, so 12mm bar seats in it, and 16mm bar is wider than the opening of the groove and will not seat down. If your track is 16mm, measure it and call us before you order. It will not run on V section track.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need?\u003c\/summary\u003e\u003cp\u003eMost sliding gates run on two wheels. The minimum order of 10 covers five gates of two wheels each.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 10 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254453125507,"sku":"SSHF-514947-01","price":5.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-gate-wheel-60mm-round-groove-m10-axle-12mm-round-bar-track-in-use.jpg?v=1794145326","url":"https:\/\/industrialsuppliesco.co.uk\/products\/sliding-gate-wheel-60mm-round-groove-m10-axle-12mm-round-bar-track","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}