{"product_id":"sliding-gate-wheel-100mm-v-groove-bracket-mount","title":"Sliding Gate Wheel 100mm, V Groove, Bracket Mount, 98mm Actual Diameter","description":"\u003cp\u003e\u003cstrong\u003eA 100mm V groove wheel, complete in its bracket, for a sliding gate on V section ground track.\u003c\/strong\u003e Fit a pair of these under the bottom rail of a steel sliding gate and the V groove runs straight along a V section ground track. The wheel arrives already fitted in a pressed steel bracket, so you are not cutting axles or fabricating a housing. It is listed at 100mm nominal and the data sheet gives 98mm for the wheel itself. The bracket sits under the rail and takes two fixing bolts at 105mm centres. The price shown is for one wheel with its bracket, with a minimum order of 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This wheel runs on V section ground track only. It will not run correctly on round bar or in a cantilever track. Data sheet sizes are a guide; components can vary slightly.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-gate-wheel-100mm-v-groove-bracket-mount-drawing.jpg?width=1200\" alt=\"Line drawing of the sliding gate wheel 100mm, v groove, bracket mount, 98mm actual diameter, side view with published dimensions and contact details\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA V groove keeps the gate on line.\u003c\/strong\u003e The V sits astride the ridge of V section ground track, so the wheel centres itself as the gate travels and the sloping faces stop it wandering off the crown. That is why a V wheel needs V track and nothing else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA simple running gear.\u003c\/strong\u003e This line is not listed as double bearing, which keeps the price down for a gate opened by hand a few times a day. Choose a double bearing wheel if the gate is motor driven or in constant use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA middle size for a V track gate.\u003c\/strong\u003e A 98mm wheel is large enough to roll over grit that would stop a small roller, while the bracket stays short at 130mm and only lifts the rail 104mm above the base of the wheel.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSteel sliding gates on V ground track at factories, yards, car parks and depots, on a box section bottom rail with a flat underside at least 35mm wide. It is not for cantilever gates, which run on carriages inside a track, and not for hanging from an overhead rail.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel in its bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003e98mm on the data sheet, sold as 100mm nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eV groove, 17mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eV section ground track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel width\u003c\/th\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eExternal pressed steel bracket, fits under the bottom rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket length\u003c\/th\u003e\n\u003ctd\u003e130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket width\u003c\/th\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e104mm, bracket top to base of wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eTwo 9mm round holes at 105mm centres in the top of the bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eNot listed as double bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eYellow zinc plated steel as photographed, coating not published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.37 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right wheel\u003c\/h2\u003e\n\u003cp\u003eYour first check is the track. This wheel needs V section track, and a round bar will not sit in the groove properly. Next decide on the bearing and the mounting. A double bearing version of this wheel has the same 98mm size, bracket and V groove, and costs a little more; choose that for a gate that moves all day or runs on a motor. If the wheel has to disappear inside a box section rail, the internal V wheel in the same size is the one to buy.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour gate\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard wheel, top bracket, V track\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel with a bolt-through axle\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/100mm-diameter-slider-wheel\"\u003e100mm V wheel, bolt-through axle\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe track itself\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-3m-ground-track-for-v-wheels\"\u003e3m V ground track\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGate runs on round bar instead\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-98mm-slider-wheel-for-gates\"\u003e98mm bracket wheel for 20mm round track\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee all \u003ca href=\"\/collections\/sc-gate-stops-wheels\"\u003egate wheels\u003c\/a\u003e and \u003ca href=\"\/collections\/sc-sliding-gate-track\"\u003esliding gate track\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark the wheel positions on the bottom rail so the two wheels sit close to the ends of the gate and in line with the track. The bracket needs a flat underside 35mm wide. Bolt through the two holes at 105mm centres, or weld the bracket after grinding the plating off the weld area and working with fume extraction. Fixings are not listed as included, so allow your own. Set the gate so that the wheels sit fully on the track along its whole travel.\u003c\/p\u003e\n\u003cp\u003eKeep the track clear of stones and packed dirt, and check the wheels and fixings at each service. Plating gives light protection only, so touch up scratches and welds with zinc-rich paint. Replace a wheel that has worn or stiffened, and check its partner at the same time.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, one wheel complete with its bracket. The minimum order is 5, because gate wheels are bought in numbers for a job. Call us for larger quantities.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes this wheel fit round bar track?\u003c\/summary\u003e\u003cp\u003eNo. The groove is a V, 17mm across, and it is made for V section ground track. For 20mm round bar, choose one of our round groove wheels, which have a half-round groove.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow heavy a gate will it carry?\u003c\/summary\u003e\u003cp\u003eA load rating is not published for this line. If your gate is heavy, or you need a figure on paper for a design, call us before you order and we will point you to a wheel with a published rating.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254439002499,"sku":"SSHF-664131-01","price":14.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/sliding-gate-wheel-100mm-v-groove-bracket-mount-in-use.jpg?v=1794144757","url":"https:\/\/industrialsuppliesco.co.uk\/products\/sliding-gate-wheel-100mm-v-groove-bracket-mount","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}