{"product_id":"rubber-parking-kerb-2000x150x100mm","title":"2 Metre Rubber Parking Kerb with Yellow End Strips - 2000 x 150 x 100 mm","description":"\u003cp\u003e\u003cstrong\u003eOne long kerb across the head of the bay, so the wheels stop before the bumper reaches the wall.\u003c\/strong\u003e This 2 metre black parking kerb bolts down at the front of a car parking bay. A driver rolls forward until the front tyres touch it, which keeps the car clear of a building, a footpath, a fence or the car parked opposite. At about 2000mm long it spans most of a standard bay, so a car that is parked a little off centre still meets the kerb with both front wheels. Yellow strips at each end show where it is in poor light. It measures about 2000 x 150 x 100mm and weighs about 17.5kg. The price is for one kerb.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-parking-kerb-2000x150x100mm-dimensions.jpg?width=1200\" alt=\"Dimension and fitting drawing of the 2000mm parking kerb: approximately 2000mm long, 150mm wide, 100mm high, with 4 fixing holes and yellow strips at each end\" width=\"1200\" height=\"984\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this kerb works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFull bay width.\u003c\/strong\u003e Shorter blocks work for one wheel each. A single 2 metre length catches both front wheels, even when the driver parks slightly to one side, and there is only one item to fit per bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYellow at both ends.\u003c\/strong\u003e Textured yellow strips run along both sloping sides at each end, so the ends of the kerb show up from either direction, including in a dim car park. The middle third is plain black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSloped sides and ends.\u003c\/strong\u003e The long sides and the ends slope down to the ground, so the kerb has no sharp step for a tyre or a foot to catch, and a wheel meets a firm face rather than a sharp edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour fixing points.\u003c\/strong\u003e Four holes run down through the top along the centre line, one near each end and one either side of the middle, so the kerb is held at both ends and in the centre.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHollow underside.\u003c\/strong\u003e The base is moulded with open pockets, which keeps the weight down to about 17.5kg for a 2 metre length while the top stays solid.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eUse it at the head of bays in office, retail park, hotel, school, hospital and housing car parks, in front of glazed shop fronts and building walls, along footpaths beside parking, and in staff car parks behind business units. It also marks where vehicles should stop in front of bin stores, cycle shelters and fences.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne kerb, priced each. Fixings not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eApprox 2000 x 150 x 100mm (length x base width x height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 17.5kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack, with yellow textured strips on both sides at each end\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProfile\u003c\/th\u003e\n\u003ctd\u003eFlat top, sloping sides and sloping ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003e4, through the top on the centre line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings needed\u003c\/th\u003e\n\u003ctd\u003e4 x M12 x 150mm: through bolts into concrete, or set screws with rubber sleeves into tarmac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnderside\u003c\/th\u003e\n\u003ctd\u003eMoulded open pockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMoulded black rubber; grade not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReflective rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSizes are approximate, as moulded parts vary slightly.\u003c\/p\u003e\n\u003ch2\u003eHow to fit it\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSet the kerb across the head of the bay, square to the bay lines and far enough from the wall that a car stops with room to open the boot or walk past.\u003c\/li\u003e\n\u003cli\u003eMark all 4 holes on the ground.\u003c\/li\u003e\n\u003cli\u003eInto concrete: drill for and fit 4 M12 x 150mm through bolts. Into tarmac: fit 4 M12 x 150mm set screws with rubber sleeves.\u003c\/li\u003e\n\u003cli\u003eTighten the fixings evenly so the kerb sits flat along its full length.\u003c\/li\u003e\n\u003cli\u003eCheck the fixings after the first week of use, then now and then.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhich one do you need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour situation\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne kerb across a full car bay\u003c\/td\u003e\n\u003ctd\u003eThis 2000mm kerb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA shorter kerb for each wheel\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-rubber-kerb-stopper\"\u003e900 x 150 x 95mm kerb\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA short block for tight spaces\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/heavy-duty-kerb-protection-710-x-145-x-100mm\"\u003e710 x 145 x 100mm kerb\u003c\/a\u003e or \u003ca href=\"\/products\/premium-reflective-rubber-kerb\"\u003e550 x 150 x 100mm kerb with chevrons\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA longer steel kerb\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-durable-kerb-stopper\"\u003e2500mm steel tube kerb stopper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA stop for lorries and trailers\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-hgv-truck-wheel-stop\"\u003eHGV truck wheel stop\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eSweep debris away from the kerb so water drains past it, check the fixings now and then, and wash the yellow strips to keep them bright. Replace the kerb if it splits or a fixing hole tears out.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one kerb?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one 2000mm kerb. Most bays need one. Set the quantity to the number of bays you are fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre fixings included?\u003c\/summary\u003e\u003cp\u003eNo. You need 4 M12 x 150mm fixings per kerb: through bolts for concrete, or set screws with rubber sleeves for tarmac. Call us and we will quote the right fixings with your order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I fit it to block paving?\u003c\/summary\u003e\u003cp\u003eBlock paving is usually laid on sand, so fixings may not hold. Fix through into a concrete base, or call us to talk through your surface before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it suitable for lorries?\u003c\/summary\u003e\u003cp\u003eNo load rating is published for this kerb. It is made for car parking bays. For heavy goods vehicles, choose the HGV truck wheel stop.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the number you need and check out online, with Express UK Delivery to your site. For a car park or a larger order, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability, fixings and delivery before you order.\u003c\/p\u003e","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63244044075395,"sku":"KRB-905057-01","price":110.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/rubber-parking-kerb-2000x150x100mm-car-park-bay.jpg?v=1793968125","url":"https:\/\/industrialsuppliesco.co.uk\/products\/rubber-parking-kerb-2000x150x100mm","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}