{"product_id":"nylon-sliding-gate-wheel-80mm-20mm-round-groove-m10-bolt-through-axle","title":"Nylon Sliding Gate Wheel 80mm (78mm Actual), 20mm Round Groove, M10 Bolt-Through Axle","description":"\u003cp\u003e\u003cstrong\u003eA plain white nylon sliding gate wheel, sold as 80mm and measuring 78mm, on an M10 threaded bolt.\u003c\/strong\u003e There is no bracket: the bolt passes through the side of a fork or channel that you weld or fabricate under the gate's bottom rail, and the wheel runs between the two sides. It runs on a 20mm diameter ground track, such as our \u003ca href=\"\/products\/sliding-gate-ground-track-3m-20mm-round-60x15mm\"\u003e20mm galvanised sliding gate track\u003c\/a\u003e. The wheel is 25mm wide with a 22mm groove opening and the bolt is 62mm long overall. No load rating is published for this round-groove wheel. The 200kg figure for two wheels belongs to the 80mm V groove version and does not carry over. The price is for one wheel, with a minimum order of 6, and most sliding gates run on two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/nylon-sliding-gate-wheel-80mm-20mm-round-groove-m10-bolt-through-axle-drawing.jpg?width=1200\" alt=\"Drawing of the 80mm nylon sliding gate wheel with 20mm round groove and M10 bolt-through axle, front and end views with published sizes\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eYour fork, your height.\u003c\/strong\u003e You make the fork yourself, so you set the ride height, and the wheel can be changed later by undoing one bolt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple to replace.\u003c\/strong\u003e Where a fork already exists, a new wheel is a bolt-out, bolt-in job with no drilling into the rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe round groove follows a 20mm section.\u003c\/strong\u003e The curved groove matches a 20mm diameter ground track, so the wheel stays centred. Measure your track before ordering, because the wheel will not seat on a smaller or larger section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuiet, and it will not rust.\u003c\/strong\u003e Nylon runs quietly on a steel track where a steel wheel can rattle, and it needs no painting. It is softer than steel, so grit and shock loads wear it faster, and it is not the choice for a heavy gate.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eFabricated sliding gates where the wheels sit in a welded fork or a section of channel under the rail, at workshops, compounds and small yards. It also replaces a worn wheel of the same size in an existing fork, provided the fork clears the wheel width and the hole matches the bolt.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel, minimum order 6, with its bolt and nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel\u003c\/th\u003e\n\u003ctd\u003eWhite nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003e78mm measured, sold as 80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel width\u003c\/th\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eRound groove for 20mm track, 22mm opening at the rim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits track\u003c\/th\u003e\n\u003ctd\u003e20mm diameter ground track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBolt\u003c\/th\u003e\n\u003ctd\u003eM10 threaded, 62mm long overall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHub\u003c\/th\u003e\n\u003ctd\u003eBearing visible at the hub, type and rating not published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.19 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right wheel\u003c\/h2\u003e\n\u003cp\u003eStart with the track, because the groove decides everything else. This wheel has a 20mm round groove with a 22mm opening at the rim, so it needs a 20mm diameter ground track and will not run on an inverted-V ground track or flat bar. For an inverted-V ground track, choose the V groove version, which has a 16mm opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst the larger size.\u003c\/strong\u003e The 100mm wheel measures 98mm rather than 78mm and comes on an M12 bolt, 68mm long overall, where this one has an M10 bolt, 62mm long. Your fork has to be drilled for the bolt you buy. A bigger wheel rolls over stones and uneven track more easily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst the other fixings.\u003c\/strong\u003e In this size and groove, the stainless bracket bolts up under the rail and stands 85mm from plate to wheel base, while the internal housing hides inside a box section rail and shows only 27mm of wheel below the tabs.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e80mm nylon wheel, 20mm round groove, M10 bolt-through axle\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA stated load rating, on steel\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/80mm-slider-wheel-20mm-track\"\u003eSteel 80mm round groove wheel, bolt-through, 400kg rated\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe track for this wheel\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sliding-gate-ground-track-3m-20mm-round-60x15mm\"\u003e20mm galvanised sliding gate track\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-gate-stops-wheels\"\u003egate wheels\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eFinish all welding before the wheel goes near the fork, because heat distorts nylon. Drill the fork for an M10 bolt, fit the bolt through the fork and the wheel, make sure the fork clears the 25mm wheel and its hub spacers, and tighten the nut so the wheel turns freely. Roll the gate through its full travel before you finish.\u003c\/p\u003e\n\u003cp\u003eKeep the track swept, because grit is what wears a nylon wheel. Check for flats and groove wear at each service and renew the wheels in pairs.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one wheel, and the minimum order is 6. That covers 3 gates fitted with a pair each, or one gate and spares.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat load will it take?\u003c\/summary\u003e\u003cp\u003eNo load rating is published for this round-groove wheel. The 200kg figure for two wheels belongs to the 80mm V groove version and does not carry over. If you need a stated figure, use a steel wheel with a published rating.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich track does it fit?\u003c\/summary\u003e\u003cp\u003eA 20mm diameter ground track. It will not run on a V track or a flat bar, and a track of a different diameter will not seat in the groove.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 6 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254453191043,"sku":"SSHF-580483-01","price":13.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/nylon-sliding-gate-wheel-80mm-20mm-round-groove-m10-bolt-through-axle-in-use.jpg?v=1794145335","url":"https:\/\/industrialsuppliesco.co.uk\/products\/nylon-sliding-gate-wheel-80mm-20mm-round-groove-m10-bolt-through-axle","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}