{"product_id":"nylon-sliding-gate-wheel-100mm-20mm-round-groove-internal-box-section-housing","title":"Nylon Sliding Gate Wheel 100mm (98mm Actual), 20mm Round Groove, Internal Box Section Housing","description":"\u003cp\u003e\u003cstrong\u003eA white nylon sliding gate wheel, sold as 100mm and measuring 98mm, in a bright metal housing made to sit inside a box section bottom rail.\u003c\/strong\u003e You cut a slot in the underside of the rail, the housing goes up into it, and the two flat end tabs fix to the rail with the wheel protruding below. It runs on a 20mm diameter ground track, such as our \u003ca href=\"\/products\/sliding-gate-ground-track-3m-20mm-round-60x15mm\"\u003e20mm galvanised sliding gate track\u003c\/a\u003e. The housing is 151mm overall and 32mm wide, with 8mm holes on 126mm centres, and only 27mm of wheel shows below the top of the tabs. No load rating is published for this wheel, so treat it as having no stated rating. The price is for one wheel, with a minimum order of 5, and most sliding gates run on two.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/nylon-sliding-gate-wheel-100mm-20mm-round-groove-internal-box-section-housing-drawing.jpg?width=1200\" alt=\"Drawing of the 100mm nylon sliding gate wheel with 20mm round groove and internal box section housing, front and end views with published sizes\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe gate stays low.\u003c\/strong\u003e With the housing inside the rail, the gate sits closer to the track than it would on a hung bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA cleaner rail.\u003c\/strong\u003e The housing is out of sight, which keeps the rail line straight and protects the wheel from knocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe round groove follows a 20mm section.\u003c\/strong\u003e The curved groove matches a 20mm diameter ground track, so the wheel stays centred. Measure your track before ordering, because the wheel will not seat on a smaller or larger section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuiet, and it will not rust.\u003c\/strong\u003e Nylon runs quietly on a steel track where a steel wheel can rattle, and it needs no painting. It is softer than steel, so grit and shock loads wear it faster, and it is not the choice for a heavy gate.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eBox section sliding gates where a tidy bottom line matters, at site entrances, office and retail car parks. Your box section must be wider inside than the 32mm housing and have more than about 71mm of clear height, because that is how far the wheel rises above the tabs. Check both before you cut the rail.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel, minimum order 5, in its housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel\u003c\/th\u003e\n\u003ctd\u003eWhite nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003e98mm measured, sold as 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel width\u003c\/th\u003e\n\u003ctd\u003e26mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eRound groove for 20mm track, 21mm opening at the rim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits track\u003c\/th\u003e\n\u003ctd\u003e20mm diameter ground track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eBright metal, material not published for this line, 151mm overall, 32mm wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eTwo 8mm holes in the end tabs on 126mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel below tabs\u003c\/th\u003e\n\u003ctd\u003e27mm from top of tab to bottom of wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing type\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.54 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right wheel\u003c\/h2\u003e\n\u003cp\u003eStart with the track, because the groove decides everything else. This wheel has a 20mm round groove with a 21mm opening at the rim, so it needs a 20mm diameter ground track and will not run on an inverted-V ground track or flat bar. For an inverted-V ground track, choose the V groove version, which has a 17mm opening.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst the smaller size.\u003c\/strong\u003e The 80mm wheel measures 78mm rather than 98mm. Its housing is 135mm overall and 33mm wide against 151mm and 32mm here, with its holes on 110mm centres rather than 126mm. Both show 27mm of wheel below the tabs, so the difference is inside the rail: this wheel rises about 71mm above them and the 80mm wheel about 51mm. The smaller wheel suits a shallower box section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst the other fixings.\u003c\/strong\u003e In this size and groove, the stainless bracket bolts up under the rail and stands 104mm from plate to wheel base, while the bare wheel on an M12 bolt goes in a fork you make yourself.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e100mm nylon wheel, 20mm round groove, internal box section housing\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA stated load rating, on steel\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/100mm-box-slider-wheel\"\u003eSteel 100mm round groove wheel, box section housing, 500kg rated\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe track for this wheel\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sliding-gate-ground-track-3m-20mm-round-60x15mm\"\u003e20mm galvanised sliding gate track\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-gate-stops-wheels\"\u003egate wheels\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eCut the slot in the underside of the rail after measuring the housing you receive, because the body length between the tabs is not published. Drill and fix the tabs to the rail through the 8mm holes on 126mm centres. Do not weld with the wheel in place, because heat distorts nylon. Roll the gate through its full travel before you finish.\u003c\/p\u003e\n\u003cp\u003eKeep the track swept, because grit is what wears a nylon wheel. Check for flats and groove wear at each service and renew the wheels in pairs.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one wheel, and the minimum order is 5. That covers 2 gates fitted with a pair each, or one gate and spares.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat load will it take?\u003c\/summary\u003e\u003cp\u003eNo load rating is published for this wheel, so treat it as having no stated rating. If you need a stated figure, use a steel wheel with a published rating.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich track does it fit?\u003c\/summary\u003e\u003cp\u003eA 20mm diameter ground track. It will not run on a V track or a flat bar, and a track of a different diameter will not seat in the groove.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254452633987,"sku":"SSHF-220035-01","price":18.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/nylon-sliding-gate-wheel-100mm-20mm-round-groove-internal-box-section-housing-in-use.jpg?v=1794145237","url":"https:\/\/industrialsuppliesco.co.uk\/products\/nylon-sliding-gate-wheel-100mm-20mm-round-groove-internal-box-section-housing","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}