{"product_id":"key-clamp-combination-tee-crossover-60-3mm-tube","title":"Key Clamp Combination Tee Crossover for 60.3mm Tube, Heavy Frame Fitting, Galvanised, Size E","description":"\u003cp\u003e\u003cstrong\u003eA three way joint for 60.3mm tube that holds an upright and two rails at one point.\u003c\/strong\u003e The upright and the front rail both pass straight through, and the side rail ends in a socket. Three hex socket grub screws lock it together, so it works as a tee and a crossover in one casting. It suits 60.3mm outside diameter tube, sold as 50mm nominal bore, and is galvanised malleable cast iron. The price shown is for one fitting, and you can order just one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-combination-tee-crossover-60-3mm-tube-drawing.jpg?width=1200\" alt=\"Drawing of the combination tee crossover for 60.3mm tube, with the upright and front rail through and the side rail in a socket\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a combination tee works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThree jobs in one fitting.\u003c\/strong\u003e It replaces a separate tee and crossover at the point where a post meets two rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe upright stays on the outside.\u003c\/strong\u003e The upright is normally placed on the outside of the structure, which helps the frame stand square and stable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong lengths stay whole.\u003c\/strong\u003e The upright and the front rail run through without a cut, and only the side rail has to end at this fitting.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eHeavy tube frames, staging and racking in 60.3mm tube, where horizontal rails meet an upright and the front rail has to carry on past the post. It is best suited to the edge posts of a frame, where the side rail runs back into the structure and the upright is on the outer face.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne fitting, no minimum order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e60.3mm outside diameter, 50mm nominal bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUpright\u003c\/th\u003e\n\u003ctd\u003ePasses through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront rail\u003c\/th\u003e\n\u003ctd\u003ePasses through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide rail\u003c\/th\u003e\n\u003ctd\u003eEnds in a socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eThree hex socket grub screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eA: front rail centre to end of side socket\u003c\/th\u003e\n\u003ctd\u003e84mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eB: upright centre to front rail centre\u003c\/th\u003e\n\u003ctd\u003e68mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eC: body height\u003c\/th\u003e\n\u003ctd\u003e74mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.50 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right size\u003c\/h2\u003e\n\u003cp\u003eMeasure the outside of your tube with a caliper rather than relying on a nominal bore size on a delivery note. This fitting is for tube that measures 60.3mm across, sold as 50mm nominal bore. The bore is cast to that size, so a smaller or larger tube will not grip properly.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombination tee on 60.3mm tube\u003c\/td\u003e\n\u003ctd\u003eThis fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombination tee on 48.3mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-3-way-combination-tee-for-48-3mm-tube\"\u003eCombination tee for 48.3mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombination tee on 42.4mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-combination-tee-42-4mm-tube\"\u003eCombination tee for 42.4mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombination tee on 33.7mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-3-way-combination-tee\"\u003eCombination tee for 33.7mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-galvanised-key-clamp-fittings-handrails\"\u003egalvanised key clamp fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eCut every tube square and remove any burr. Slide the upright and front rail through their barrels, push the side rail fully home into its socket and line the frame up. Tighten each grub screw with a hex key until it bites firmly, and do not overdrive it.\u003c\/p\u003e\n\u003cp\u003eNo load rating is published for this line. If the frame has to meet a design loading, have it assessed by a competent person before it goes into use.\u003c\/p\u003e\n\u003cp\u003eCheck the grub screws during routine inspections of the frame, especially where it is exposed to vibration. Galvanising needs no routine care in normal conditions, and any cut tube ends or damaged areas can be touched up with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one fitting, and you can order a single one. For a larger job, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich tubes pass through?\u003c\/summary\u003e\u003cp\u003eThe upright and the front rail pass straight through. The side rail ends in a socket.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhere should the upright go?\u003c\/summary\u003e\u003cp\u003eIt is normally on the outside of the structure, which gives the frame better stability.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outdoors?\u003c\/summary\u003e\u003cp\u003eYes, it is galvanised, so it suits outdoor frames. Check the grub screws at each routine inspection.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254320546179,"sku":"SSHF-167171-01","price":28.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-combination-tee-crossover-60-3mm-tube-in-use.jpg?v=1794140965","url":"https:\/\/industrialsuppliesco.co.uk\/products\/key-clamp-combination-tee-crossover-60-3mm-tube","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}