{"product_id":"key-clamp-adjustable-long-tee-30-45-degrees-42-4mm-tube","title":"Key Clamp Adjustable Long Tee 30-45° for 42.4mm Tube, Stair Rail Fitting, Galvanised","description":"\u003cp\u003e\u003cstrong\u003eA long barrelled tee for 42.4mm tube, adjustable from 30 to 45 degrees, for bringing a vertical upright into a sloping rail.\u003c\/strong\u003e The rail runs along the barrel and the upright enters through an oval opening in its underside, which allows the angle between them to be set anywhere in that range. Three hex socket grub screws lock the joint without welding. The fitting suits 42.4mm outside diameter tube, sold as 32mm nominal bore, and is galvanised malleable cast iron. The price shown is for one fitting, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-adjustable-long-tee-30-45-degrees-42-4mm-tube-drawing.jpg?width=1200\" alt=\"Drawing of the adjustable long tee for 42.4mm tube, a long barrel with three grub screws\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy an adjustable long tee works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSet the angle on site.\u003c\/strong\u003e A fixed fitting only works at one pitch. This one can be set between 30 and 45 degrees, so flights of different pitch within that range can use the same fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA long barrel for a good grip on the rail.\u003c\/strong\u003e The barrel gives the rail more length to bear on than a short tee, with a grub screw at each end and one in the middle for the upright.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo hot work.\u003c\/strong\u003e Slide the tube in, set the angle and tighten the screws. There is no welding, no fire permit to arrange and no galvanising to repair on site.\u003c\/p\u003e\n\u003cp\u003eIn short: one fitting for a range of pitches, with a long grip on the rail and no welding.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eConnecting an angled handrail or guard rail to a vertical upright on stairs and sloping runs. It is at its best where the pitch is known but not standard, or where the same fitting needs to cover several flights at slightly different angles. Check the pitch you need before ordering, because outside 30 to 45 degrees this fitting will not sit true.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne fitting, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e42.4mm outside diameter, 32mm nominal bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003ctd\u003eAdjustable, 30 to 45 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eThree hex socket grub screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.05 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right size and type\u003c\/h2\u003e\n\u003cp\u003eMeasure the outside of your tube with a caliper rather than relying on a nominal bore size on a delivery note. This fitting is for tube that measures 42.4mm across, sold as 32mm nominal bore. The bore is cast to that size, so a smaller or larger tube will not grip properly.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eThis fitting\u003c\/td\u003e\n\u003ctd\u003eAdjustable long tee, 30 to 45 degrees, 42.4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA shorter barrel, 42.4mm, 30 to 60 degrees\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/adjustable-short-tee-key-clamp\"\u003eAdjustable short tee for 42.4mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA level run at 90 degrees, 42.4mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-long-tee-key-clamp-42-4mm\"\u003eLong tee for 42.4mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA sloping tee with the rail falling away, 42.4mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-sloping-down-tee-30-45\"\u003eSloping down tee, 30 to 45 degrees\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA sloping tee with the rail rising, 42.4mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-sloping-up-tee-30-45-degrees\"\u003eSloping up tee, 30 to 45 degrees\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-galvanised-key-clamp-fittings-handrails\"\u003egalvanised key clamp fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eCut the tube ends square and remove any burr. Slide the rail along the barrel, bring the upright into the oval opening and set the angle before anything goes tight. Tighten the grub screws evenly with a hex key until they bite firmly on the tube, and do not overdrive them.\u003c\/p\u003e\n\u003cp\u003eNo load rating is published for this line. If the frame has to meet a design loading, have it assessed by a competent person before it goes into use.\u003c\/p\u003e\n\u003cp\u003eCheck the grub screws during routine inspections of the frame, especially where it is exposed to vibration. Galvanising needs no routine care in normal conditions, and any cut tube ends or damaged areas can be touched up with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one fitting, and the minimum order is 5. For a larger job, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat angles does it cover?\u003c\/summary\u003e\u003cp\u003eFrom 30 to 45 degrees between the rail and the upright. Outside that range, choose a different fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit my tube?\u003c\/summary\u003e\u003cp\u003eIt is made for 42.4mm outside diameter tube, 32mm nominal bore. Measure the outside of your tube with a caliper before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outdoors?\u003c\/summary\u003e\u003cp\u003eYes, the fitting is galvanised, so it suits outdoor rails in galvanised tube. Check the grub screws at each routine inspection.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254318481795,"sku":"SSHF-446275-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-adjustable-long-tee-30-45-degrees-42-4mm-tube-in-use.jpg?v=1794140775","url":"https:\/\/industrialsuppliesco.co.uk\/products\/key-clamp-adjustable-long-tee-30-45-degrees-42-4mm-tube","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}