{"product_id":"key-clamp-90-degree-corner-double-swivel-60-3mm-tube","title":"Key Clamp 90° Corner Double Swivel for 60.3mm Tube, Sloping Rail Corner Fitting, Galvanised, Size E","description":"\u003cp\u003e\u003cstrong\u003eA corner fitting for 60.3mm tube with two sockets that swivel, for angles a fixed or simple adjustable fitting cannot reach.\u003c\/strong\u003e A central ring goes on the post, and a socket hinges from each side of it at 90 degrees to the other. Each swivel moves about 85 degrees up or down from level. Three hex socket grub screws hold the post and the two rail ends. It suits 60.3mm outside diameter tube, sold as 50mm nominal bore, and is galvanised malleable cast iron, supplied as a riveted assembly. The price shown is for one fitting, and you can order just one.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-90-degree-corner-double-swivel-60-3mm-tube-drawing.jpg?width=1200\" alt=\"Drawing of the 90 degree corner double swivel for 60.3mm tube, with two swivelling sockets on a central post ring\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a double swivel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTwo rails, two angles.\u003c\/strong\u003e Each socket moves independently of the other, so a corner where the two rails rise or fall at different slopes can be made with one fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor the awkward joints.\u003c\/strong\u003e Use it where a fixed tee or an adjustable angle fitting cannot match the geometry, such as a change of slope at a corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding.\u003c\/strong\u003e The joint is set with a hex key, with no hot work and no galvanising to repair.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCorners on sloping guard rails and ramps, changes of level at the corner of a platform or stair, and other difficult applications where the rail angles cannot be accommodated by a standard adjustable fitting. Each socket travels approximately 85 degrees from the horizontal in both vertical directions, and the swivel is a hinge, not a structural brace.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne fitting, no minimum order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e60.3mm outside diameter, 50mm nominal bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLayout\u003c\/th\u003e\n\u003ctd\u003ePost ring with two sockets at 90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSwivel range\u003c\/th\u003e\n\u003ctd\u003eAbout 85 degrees up or down from level, each socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAssembly\u003c\/th\u003e\n\u003ctd\u003eRiveted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eThree hex socket grub screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eA: post centre to the hinge pin\u003c\/th\u003e\n\u003ctd\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eB: post centre to the face of the rear socket\u003c\/th\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.90 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right size and part\u003c\/h2\u003e\n\u003cp\u003eMeasure the outside of your tube with a caliper rather than relying on a nominal bore size on a delivery note. This fitting is for tube that measures 60.3mm across, sold as 50mm nominal bore. The bore is cast to that size, so a smaller or larger tube will not grip properly.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eComplete corner swivel on 60.3mm tube\u003c\/td\u003e\n\u003ctd\u003eThis fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCorner swivel on 48.3mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/90-corner-double-swivel-connector-2\"\u003eCorner double swivel for 48.3mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCorner swivel on 42.4mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-90-degree-corner-double-swivel-connector\"\u003eCorner double swivel for 42.4mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA female swivel part on 60.3mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-single-swivel-connector-1\"\u003eFemale swivel connector for 60.3mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-galvanised-key-clamp-fittings-handrails\"\u003egalvanised key clamp fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eCut every tube square and remove any burr. Slide the post through the central ring and set the height, push each rail end fully into its socket and swing the sockets to the angles you need. Tighten each grub screw with a hex key until it bites firmly, and do not overdrive it. The swivels are not designed to carry lateral loads, so the rail run must be supported on posts either side of the corner.\u003c\/p\u003e\n\u003cp\u003eNo load rating is published for this line. If the frame has to meet a design loading, have it assessed by a competent person before it goes into use.\u003c\/p\u003e\n\u003cp\u003eCheck the grub screws during routine inspections of the frame, especially where it is exposed to vibration. Galvanising needs no routine care in normal conditions, and any cut tube ends or damaged areas can be touched up with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one fitting, and you can order a single one. For a larger job, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow far do the sockets swivel?\u003c\/summary\u003e\u003cp\u003eEach socket travels approximately 85 degrees from the horizontal in both vertical directions, independently of the other.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it a one piece fitting?\u003c\/summary\u003e\u003cp\u003eIt is a riveted assembly made up of a male part and two female swivel sockets, supplied assembled.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outdoors?\u003c\/summary\u003e\u003cp\u003eYes, it is galvanised, so it suits outdoor rails. Check the grub screws and the swivel at each routine inspection.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254320644483,"sku":"SSHF-298243-01","price":38.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-90-degree-corner-double-swivel-60-3mm-tube-in-use.jpg?v=1794141005","url":"https:\/\/industrialsuppliesco.co.uk\/products\/key-clamp-90-degree-corner-double-swivel-60-3mm-tube","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}