{"product_id":"key-clamp-90-degree-clamp-on-tee-60-3mm-tube","title":"Key Clamp 90° Clamp On Tee for 60.3mm Tube, Bolt-On Fitting for Existing Rails, Galvanised","description":"\u003cp\u003e\u003cstrong\u003eA 90 degree tee for 60.3mm tube that bolts on round a rail that is already in place.\u003c\/strong\u003e A hooped top closes round the existing rail and a single bolt pulls it tight, so you can add a post, a brace or a mid rail without taking anything apart. The new tube pushes into the socket below and is held by a hex socket grub screw. It is for 60.3mm outside diameter tube, sold as 50mm nominal bore, and is galvanised malleable cast iron. The price shown is for one fitting, with a minimum order of 5.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-90-degree-clamp-on-tee-60-3mm-tube-drawing.jpg?width=1200\" alt=\"Drawing of the 90 degree clamp on tee for 60.3mm tube, with the clamp bolt and socket marked\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy a clamp on tee works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNo need to dismantle the frame.\u003c\/strong\u003e A standard short tee has to slide along the rail from the end of the tube. This one opens, goes round the rail where it stands and closes with one bolt, which is the point of it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGood for additions and alterations.\u003c\/strong\u003e Use it when an existing structure needs a new post, brace or rail in a position that a normal tee cannot reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo welding.\u003c\/strong\u003e One bolt and one grub screw do the work, so there is no hot work on site and no galvanising to repair.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eExtra uprights added to existing 60.3mm tube frames, new braces on guard rails and platforms, and repairs where a fitting has to go on partway along a run. It also suits frames where the end of the rail has been closed off and a tee cannot be threaded on.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne fitting, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits tube\u003c\/th\u003e\n\u003ctd\u003e60.3mm outside diameter, 50mm nominal bore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003ctd\u003e90 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eMalleable cast iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing to the rail\u003c\/th\u003e\n\u003ctd\u003eOne bolt closes the clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing to the new tube\u003c\/th\u003e\n\u003ctd\u003eOne hex socket grub screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eA: rail centre to end of socket\u003c\/th\u003e\n\u003ctd\u003e91mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eB: rail centre to bolt centre\u003c\/th\u003e\n\u003ctd\u003e44mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.01 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right size and type\u003c\/h2\u003e\n\u003cp\u003eMeasure the outside of your tube with a caliper rather than relying on a nominal bore size on a delivery note. This fitting is for tube that measures 60.3mm across, sold as 50mm nominal bore. The bore is cast to that size, so a smaller or larger tube will not grip properly.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou need\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA clamp on tee on 60.3mm tube\u003c\/td\u003e\n\u003ctd\u003eThis fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA clamp on tee on 48.3mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-90-degree-upstand-clamp-on-tee\"\u003eClamp on tee for 48.3mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA clamp on tee on 42.4mm tube\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/90-degree-upstand-clamp-on-tee-for-42-4mm-tube\"\u003eClamp on tee for 42.4mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA new 60.3mm frame with open tube ends\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-short-tee-key-clamp-for-60-3mm-tubing\"\u003eShort tee for 60.3mm tube\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/sc-galvanised-key-clamp-fittings-handrails\"\u003egalvanised key clamp fittings\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eOpen the clamp, close it round the existing rail where you want the new tube, and tighten the bolt until the clamp is firm. Cut the new tube square, remove any burr, push it fully into the socket and tighten the grub screw with a hex key. Do not overdrive either fixing. The rail cannot be joined inside this fitting, so plan any joints elsewhere.\u003c\/p\u003e\n\u003cp\u003eNo load rating is published for this line. If the frame has to meet a design loading, have it assessed by a competent person before it goes into use.\u003c\/p\u003e\n\u003cp\u003eCheck the grub screws during routine inspections of the frame, especially where it is exposed to vibration. Galvanising needs no routine care in normal conditions, and any cut tube ends or damaged areas can be touched up with a zinc-rich paint.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one fitting?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one fitting, and the minimum order is 5. For a larger job, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need to take the rail down to fit it?\u003c\/summary\u003e\u003cp\u003eNo. The top opens and closes round a rail already in place, and one bolt holds it.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat is it fitted to?\u003c\/summary\u003e\u003cp\u003eIt clamps round 60.3mm tube and holds a new 60.3mm tube in its socket. The tube sizes do not vary on this fitting.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use it outdoors?\u003c\/summary\u003e\u003cp\u003eYes, it is galvanised, so it suits outdoor frames. Check the bolt and grub screw at each routine inspection.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254320120195,"sku":"SSHF-839491-01","price":19.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/key-clamp-90-degree-clamp-on-tee-60-3mm-tube-in-use.jpg?v=1794140851","url":"https:\/\/industrialsuppliesco.co.uk\/products\/key-clamp-90-degree-clamp-on-tee-60-3mm-tube","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}