{"product_id":"internal-box-section-sliding-gate-wheel-100mm-v-groove","title":"Internal Box Section Sliding Gate Wheel 100mm, V Groove","description":"\u003cp\u003e\u003cstrong\u003eA 100mm V groove wheel that sits inside a box section rail, for sliding gates on V ground track.\u003c\/strong\u003e Choose this wheel when you want a clean rail with no bracket showing. The wheel goes up inside the bottom rail through a slot, with two foot flanges bolting to the underside. Only the base of the wheel shows, 27mm below the mounting face on the data sheet. It is listed at 100mm and given as 98mm, with a 17mm V groove for V section ground track, and the foot is 152mm long with two 8mm holes at 126mm centres. The price shown is for one wheel with its bracket, with a minimum order of 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This wheel runs on V section ground track only. It will not run correctly on round bar or in a cantilever track. Data sheet sizes are a guide; components can vary slightly.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/internal-box-section-sliding-gate-wheel-100mm-v-groove-drawing.jpg?width=1200\" alt=\"Line drawing of the internal box section sliding gate wheel 100mm, v groove, side view with published dimensions and contact details\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA V groove keeps the gate on line.\u003c\/strong\u003e The V sits astride the ridge of V section ground track, so the wheel centres itself as the gate travels and the sloping faces stop it wandering off the crown. That is why a V wheel needs V track and nothing else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA simple running gear.\u003c\/strong\u003e This line is not listed as double bearing, which keeps the price down for a gate opened by hand a few times a day. Choose a double bearing wheel if the gate is motor driven or in constant use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMostly hidden, and low to the ground.\u003c\/strong\u003e With only 27mm of the 98mm wheel below the mounting face, the rail sits much closer to the track than it does on a bracket wheel, which needs 104mm. About 71mm of the wheel rises up inside the rail, so check the height inside your box section first.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eNew sliding gates in box section rail on V ground track, where a tidy line along the bottom of the gate matters. The rail needs a slot cut in its underside and enough internal room for the wheel and its 33mm wide bracket. It is not for cantilever gates.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel in its bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003e98mm on the data sheet, sold as 100mm nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eV groove, 17mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003eV section ground track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel width\u003c\/th\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eInternal, sits inside a box section rail with two foot flanges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFoot length\u003c\/th\u003e\n\u003ctd\u003e152mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall width\u003c\/th\u003e\n\u003ctd\u003e33mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBelow mounting face\u003c\/th\u003e\n\u003ctd\u003e27mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAbove mounting face\u003c\/th\u003e\n\u003ctd\u003eAbout 71mm of wheel, calculated from the data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eTwo 8mm round holes at 126mm centres in the foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eNot listed as double bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eYellow zinc plated steel as photographed, coating not published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.29 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right wheel\u003c\/h2\u003e\n\u003cp\u003eIf your rail cannot take a slot, or you are retrofitting a finished gate, use the external 100mm V wheel, which bolts under the rail with no cutting. The 140mm and 80mm internal wheels in this range run on 20mm round bar, not V track, so they will not suit this track. Check your rail for internal height before ordering: it must clear at least 71mm plus the bracket.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour gate\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal wheel, V track\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal bracket, V track\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sliding-gate-wheel-100mm-v-groove-bracket-mount\"\u003e100mm V wheel, bracket mount\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal, double bearing, V track\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/double-bearing-sliding-gate-wheel-100mm-v-groove-bracket-mount\"\u003e100mm double bearing V wheel\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal wheel, 20mm round bar\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/100mm-box-slider-wheel\"\u003e100mm box section housing wheel\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe track itself\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-3m-ground-track-for-v-wheels\"\u003e3m V ground track\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee all \u003ca href=\"\/collections\/sc-gate-stops-wheels\"\u003egate wheels\u003c\/a\u003e and \u003ca href=\"\/collections\/sc-sliding-gate-track\"\u003esliding gate track\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eCut a slot in the underside of the rail, long enough to clear the 152mm foot and wide enough for the 33mm bracket. Check that the section is deep enough to clear about 71mm of wheel above the mounting face. Offer the wheel up from underneath and bolt the two foot flanges to the rail through the holes at 126mm centres. Fixings are not listed as included, so allow your own. Leave no sharp edges on the slot, and paint any bare steel.\u003c\/p\u003e\n\u003cp\u003eKeep the track clear of stones and packed dirt, and check the wheels and fixings at each service. Plating gives light protection only, so touch up scratches and welds with zinc-rich paint. Replace a wheel that has worn or stiffened, and check its partner at the same time.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, one wheel complete with its bracket. The minimum order is 5, because gate wheels are bought in numbers for a job. Call us for larger quantities.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat size box section do I need?\u003c\/summary\u003e\u003cp\u003eThe bracket is 33mm wide across the foot and about 71mm of the wheel rises above the mounting face. Your rail needs to be wider and taller inside than that. Exact rail sizes are not published, so measure inside your section.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it be fitted to a finished gate?\u003c\/summary\u003e\u003cp\u003eIt needs a slot cut in the underside of the rail, so it is best fitted when the gate is being built. For a finished gate, the external bracket wheel avoids cutting into the rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat track does it need?\u003c\/summary\u003e\u003cp\u003eV section ground track. The V groove is 17mm across. It will not run on round bar.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254452273539,"sku":"SSHF-957891-01","price":13.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/internal-box-section-sliding-gate-wheel-100mm-v-groove-in-use.jpg?v=1794145190","url":"https:\/\/industrialsuppliesco.co.uk\/products\/internal-box-section-sliding-gate-wheel-100mm-v-groove","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}