{"product_id":"insert-lock-kit-40mm-older-box-section-cut-out-black","title":"Insert Lock Kit for 40mm Box Section Gates, Older Pattern Cut-Out, Black","description":"\u003cp\u003e\u003cstrong\u003eA replacement insert lock kit for 40mm box section gates that were cut for an earlier pattern of lock body.\u003c\/strong\u003e If you are replacing a worn insert lock and the slot in your stile does not match the current lock case, this is the kit to look at before you start cutting the post again. It is a full kit in black, made up of the lock, two aluminium cover plates, a cylinder, a black aluminium handle set and a keep, so an old gate can be brought back into service from one order. The backset is 20mm. It suits metal, aluminium and PVC gates built from 40mm profile, and it fits an older style cut-out, so check the slot in your gate before you order it.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/insert-lock-kit-40mm-older-box-section-cut-out-black-drawing.jpg?width=1200\" alt=\"Drawing of the insert gate lock for 40mm box section with an older pattern cut-out, black kit\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this kit works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIt answers the awkward repair.\u003c\/strong\u003e The expensive part of replacing a lock on a finished gate is cutting and repainting the stile. This kit is intended for the older style of box section cut-out, so the gate does not need to be remade around a new lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless where it matters.\u003c\/strong\u003e The mechanism, hook, front plate and latch bolt are stainless steel, the right choice for a lock that sits outdoors and gets used all day.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA hook that anchors.\u003c\/strong\u003e The hook has a 21mm throw into the keep, and with the right keep the gate leaves cannot simply be pulled apart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustment without dismounting.\u003c\/strong\u003e The day bolt adjusts continuously by up to 10mm, and it changes easily between left and right.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eRepairs and replacements on gates that already have an insert lock slot, typically gates of a few years old on commercial premises, housing and public buildings. The kit is black, so match it to the colour of the gate and the handles already on site. It is a swing gate lock and not for sliding gates.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eLock, 2 aluminium cover plates, cylinder, black aluminium handle set and keep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003e40mm box section with an older style cut-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack cover plates and handles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBackset\u003c\/th\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHook throw\u003c\/th\u003e\n\u003ctd\u003e21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDay bolt adjustment\u003c\/th\u003e\n\u003ctd\u003eUp to 10mm, reversible left or right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCylinder to handle centres\u003c\/th\u003e\n\u003ctd\u003e92mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCylinder type\u003c\/th\u003e\n\u003ctd\u003eEuro profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMechanism\u003c\/th\u003e\n\u003ctd\u003eStainless steel, with stainless hook, front plate and latch bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing into the profile\u003c\/th\u003e\n\u003ctd\u003eClip-in, no tapped thread in the profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut-out length\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGate materials\u003c\/th\u003e\n\u003ctd\u003eMetal, aluminium and PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.39 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing between the patterns\u003c\/h2\u003e\n\u003cp\u003eThe whole question here is the slot. Before ordering, take the old lock out and measure the length and width of the cut-out and the position of the fixing holes, and send us those measurements or a photo if you want a second opinion. This kit is the older pattern. A gate cut for the current lock body, or a new gate, should use the current kit, which has a published 176 x 22mm cut-out. Do not assume a replacement will fit just because the box section is 40mm.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou have\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e40mm gate cut for the older lock, black\u003c\/td\u003e\n\u003ctd\u003eThis kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40mm gate cut for the older lock, silver\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/insert-lock-kit-40mm-older-box-section-cut-out-silver\"\u003eOlder cut-out kit, silver\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40mm gate with the current cut-out, or a new gate\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/insert-lock-kit-40mm-box-section-gates-silver-handles-cylinder-keep\"\u003eInsert lock kit for 40mm box section, current pattern\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOnly the lock body is needed\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-insert-lock-40mm-box-section-gates\"\u003eInsert lock for 40mm box section, lock only\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOnly the handles are worn\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/anodized-aluminium-handles-for-insert-locks-1\"\u003eHandle pair for insert gate locks\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eRemove the old lock, clean up the slot and check for rust at the cut edges, and treat any you find before the new lock goes in. Slide the new lock in and clip it home, fit the cover plates and handles, then the cylinder. Refit or fit the keep so that the hook enters without binding, and set the day bolt so that the gate closes without slamming. We recommend a safety cable on all swing gates.\u003c\/p\u003e\n\u003cp\u003eKeep the fore plate slots clear of grit and check the handle fixings at routine maintenance. Replacement cylinders can be keyed to match others on the site.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eHow do I know if I need this kit?\u003c\/summary\u003e\u003cp\u003eTake out the existing lock and measure the slot. If it does not match the current 176 x 22mm cut-out, this older pattern kit is the likely answer. Call us with the measurements if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the keep included?\u003c\/summary\u003e\u003cp\u003eYes, the kit includes a keep along with the lock, cover plates, cylinder and handle set.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit a 50mm box section?\u003c\/summary\u003e\u003cp\u003eNo, it is for 40mm box section. Larger profiles need a lock sized for that profile.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I use a different cylinder?\u003c\/summary\u003e\u003cp\u003eYes, it accepts Euro profile cylinders. Check the length against your gate first.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254342009219,"sku":"SSHF-968259-01","price":180.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/insert-lock-kit-40mm-older-box-section-cut-out-black-in-use.jpg?v=1794141542","url":"https:\/\/industrialsuppliesco.co.uk\/products\/insert-lock-kit-40mm-older-box-section-cut-out-black","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}