{"product_id":"insert-keep-code-lock-insert-locks-484mm-black-40-50mm-gates","title":"Insert Keep for Insert Locks with Code Lock Kits, 484mm, Black, 40-50mm Gates","description":"\u003cp\u003e\u003cstrong\u003eA long insert keep for gates fitted with an insert lock and a code lock on the same stile.\u003c\/strong\u003e The keep is 484mm from end to end, because a code lock sits above the handle position and the keep has to take both the lock hook and the bolt positions further up the post. It is black, it sets into a slot in the post rather than sitting on the face of it, and it clips into the profile so you are not tapping threads into thin box section. The stop plate adjusts for gate profiles of 40 and 50mm, and an aluminium extrusion with a rubber strip gives the gate a soft stop every time it closes. It changes easily between left and right.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/insert-keep-code-lock-insert-locks-484mm-black-40-50mm-gates-drawing.jpg?width=1200\" alt=\"Drawing of the 484mm black keep for insert locks fitted with a code lock\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this keep works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eOne keep for the whole lock height.\u003c\/strong\u003e A code lock adds a fitting above the handle, so a standard short keep leaves part of the lock with nothing to bite on. This keep covers the full height in one part.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSet into the post.\u003c\/strong\u003e As an insert keep it goes into a slot, so the face of the post stays clean and there is less on show to knock or lever at.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClip-in fitting.\u003c\/strong\u003e The integrated clip system locates the keep in the profile and removes the need to tap a thread in the post, which is often a weak point in thin section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA soft closing stop.\u003c\/strong\u003e The extruded aluminium stop plate carries a rubber strip for long-term use and absorbs the shock of a gate closing unattended.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eCode-locked pedestrian gates on schools, plant rooms and residential blocks, where the post can be slotted and a neat finish is wanted. It is for insert locks with a code lock, in a square post, so it is not the right part for a surface lock or a plain insert lock without a code lock above it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne keep with stop plate and fixings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall length\u003c\/th\u003e\n\u003ctd\u003e484mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eInsert keep, set into a slot in the post\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGate profiles\u003c\/th\u003e\n\u003ctd\u003eAdjustable for 40 and 50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorks with\u003c\/th\u003e\n\u003ctd\u003eInsert locks for 40, 50, 60 and 80mm profiles fitted with a code lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStop plate\u003c\/th\u003e\n\u003ctd\u003eExtruded aluminium with rubber strip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHanding\u003c\/th\u003e\n\u003ctd\u003eChanges easily between left and right\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePost preparation\u003c\/th\u003e\n\u003ctd\u003e176mm slot, 22mm wide, with 15mm and 7mm holes on the published centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.46 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right keep\u003c\/h2\u003e\n\u003cp\u003eThe question is whether a code lock sits on the same stile. If it does, you need a keep long enough to serve the full lock height, and this one sets into the post. If you would rather not slot the post, the surface keep does the same job on the face of it. Without a code lock, a plain insert keep is enough and costs less.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour gate\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert lock with code lock, 40 or 50mm gate, slot the post\u003c\/td\u003e\n\u003ctd\u003eThis keep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsert lock with code lock, keep on the face of the post, 40 to 60mm\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-surface-mounted-keep-for-locks\"\u003eSurface keep for code lock kits, 488mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePlain insert lock, no code lock\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-stainless-steel-keep-insert-lock\"\u003eStainless keep with stop plate, 40-50mm\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLooking for the code lock itself\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/mechanical-double-sided-code-lock-kit\"\u003eMechanical gate code lock kit, keypad both sides\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eCall us with the lock you are fitting if you would like us to confirm the pairing before you cut the post.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eClose the gate and mark the lock positions on the post, then cut the slot and drill the holes from the data sheet, which shows the 176 x 22mm slot and the hole centres down the post. Set the keep into the slot, secure it, and adjust the stop plate for your 40 or 50mm gate frame. Check that the lock and the code lock bolt enter cleanly and that the gate closes under its own weight without bouncing. We recommend a safety cable on all swing gates.\u003c\/p\u003e\n\u003cp\u003eClear grit out of the keep at routine maintenance and replace the rubber strip if it perishes.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it suit a gate frame of 60mm?\u003c\/summary\u003e\u003cp\u003eThis keep is adjustable for gate profiles of 40 and 50mm. For larger frames the surface keep covers 40 to 60mm, so call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes it need a slot in the post?\u003c\/summary\u003e\u003cp\u003eYes, it is an insert keep, so the post has to be slotted. The surface keep in the table avoids that if slotting is not practical.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need a code lock with it?\u003c\/summary\u003e\u003cp\u003eIt is made for insert locks fitted with a code lock. A plain insert lock is better served by a standard keep.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it left or right handed?\u003c\/summary\u003e\u003cp\u003eIt changes easily between left and right, so one part suits either hand.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254322971011,"sku":"SSHF-445123-01","price":72.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/insert-keep-code-lock-insert-locks-484mm-black-40-50mm-gates-in-use.jpg?v=1794141126","url":"https:\/\/industrialsuppliesco.co.uk\/products\/insert-keep-code-lock-insert-locks-484mm-black-40-50mm-gates","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}