{"product_id":"heavy-cantilever-gate-kit-12m-1000kg","title":"Heavy Cantilever Gate Kit, Gates up to 12m and 1000kg","description":"\u003cp\u003e\u003cstrong\u003eThe running gear for a heavy cantilever gate, rated for gates up to 12m and 1000kg.\u003c\/strong\u003e The kit holds two 8-wheel carriages, a support wheel, an end stop and four 3m lengths of heavy cantilever track, which gives you 12m of track, matching the kit limit. A cantilever gate carries no track across the opening. The gate hangs from a steel track fixed along its bottom edge and rolls on two carriages set on a foundation beside the entrance, so a wide opening stays clear for wagons and plant. The price is for the complete kit, which weighs about 156 kg, so plan for handling it on site.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/heavy-cantilever-gate-kit-12m-1000kg-drawing.jpg?width=1200\" alt=\"Drawing of the 8-wheel carriage from the heavy cantilever gate kit, 285mm long over the wheels on a 280 x 150mm base plate\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this kit works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for wide, heavy entrances.\u003c\/strong\u003e The track is 94mm wide with a 5mm wall, and the carriages run 65mm wheels on a base plate 280mm long. That is a far larger section than the lighter grades, suited to long gates.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNothing lies across the entrance.\u003c\/strong\u003e On a depot or haulage yard a ground track takes constant punishment from wagons. Here the opening is clear and the running gear sits to one side, out of the wheel path.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnough track for the job.\u003c\/strong\u003e Four 3m lengths give 12m in the box, so the kit reaches its stated limit without a separate purchase of track.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts sized to each other.\u003c\/strong\u003e Carriages, support wheel, end stop and track are all heavy grade, so nothing here has to be adapted to fit.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eLong cantilever gates at haulage yards, distribution sites, factories, ports and utility compounds, where a gate over 8m or over 600kg is out of range for the medium kit. It suits manual gates and motorised gates with a gear rack and operator, which are not included. It needs a run of clear ground beside the opening for the tail of the gate, and a concrete foundation designed for the gate and long enough for both carriages.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003e2 x \u003ca href=\"\/products\/heavy-duty-cantilever-trolley-carriage\"\u003e8-wheel carriages, max 1000kg\u003c\/a\u003e\u003cbr\u003e1 x \u003ca href=\"\/products\/cantilever-gate-support-wheel-heavy\"\u003esupport wheel with rubber buffer\u003c\/a\u003e\u003cbr\u003e1 x \u003ca href=\"\/products\/heavy-duty-cantilever-end-stop\"\u003eend stop (meeting point)\u003c\/a\u003e\u003cbr\u003e4 x \u003ca href=\"\/products\/heavy-duty-cantilever-track-3000mm\"\u003e3m lengths of heavy track\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRated for\u003c\/th\u003e\n\u003ctd\u003eGates up to 12m and 1000kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack supplied\u003c\/th\u003e\n\u003ctd\u003e4 x 3m (12m in total)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack section\u003c\/th\u003e\n\u003ctd\u003e94mm wide x 84mm high, 5mm wall, 33mm slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCarriage\u003c\/th\u003e\n\u003ctd\u003e285mm long over the wheels, 145mm high, 65mm wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCarriage base plate\u003c\/th\u003e\n\u003ctd\u003e280 x 150mm, 12mm thick, 15mm wide slots at 240 x 105mm centres with a central row\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupport wheel\u003c\/th\u003e\n\u003ctd\u003e83mm wheel, housing 126 x 60mm, end plate 94 x 84mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnd stop\u003c\/th\u003e\n\u003ctd\u003e148mm wide, 95mm high, 102mm deep, four holes at 50mm centres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eZinc-plated carriages and fittings, galvanised track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 156 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot included\u003c\/th\u003e\n\u003ctd\u003eTop guide, foundation plates and fixings, gear rack and operator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right kit\u003c\/h2\u003e\n\u003cp\u003eChoose by gate length and weight, and check both. This is the top of the range: it takes gates 4m longer and 400kg heavier than the medium kit, and it comes with twice the track. The parts are much bigger too, so they are not interchangeable with the lighter grades. If your gate is well inside 8m and under 600kg, the medium kit is the sensible, cheaper choice.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eKit\u003c\/th\u003e\n\u003cth\u003eGates up to\u003c\/th\u003e\n\u003cth\u003eTrack in the kit\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003e5m and 500kg\u003c\/td\u003e\n\u003ctd\u003e2 x 3m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-light-cantilever-gate-kit\"\u003eLight cantilever kit\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003e8m and 600kg\u003c\/td\u003e\n\u003ctd\u003e2 x 3m\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/medium-cantilever-gate-kit-8m-600kg\"\u003eMedium cantilever kit\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy\u003c\/td\u003e\n\u003ctd\u003e12m and 1000kg\u003c\/td\u003e\n\u003ctd\u003e4 x 3m\u003c\/td\u003e\n\u003ctd\u003eThis kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eOver 12m or over 1000kg is outside this kit. Call us with the gate size and weight before you commit to steelwork.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eWeld the track along the bottom edge of the gate with the slot facing down, and grind every joint smooth inside so that the wheels pass over them cleanly. Cast a level concrete foundation beside the opening, long enough for both carriages, and fix the carriages level and in line through their slotted base plates, spaced to suit the tail of your gate. Slide the gate track onto the carriages, fit the support wheel into the leading end and the end stop at the closing post, then add a \u003ca href=\"\/products\/premium-guide-bracket-nylon-rollers\"\u003etop guide bracket\u003c\/a\u003e so that the gate cannot lean.\u003c\/p\u003e\n\u003cp\u003eA gate this size needs lifting equipment to hang safely. Keep the track clear inside and check the base plate fixings and carriage pivot bolts at least once a year.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for the whole kit?\u003c\/summary\u003e\u003cp\u003eYes, the price is for the complete kit listed above, one set of parts for one gate.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs 12m of track enough?\u003c\/summary\u003e\u003cp\u003eThe kit includes four 3m lengths, 12m in total, which matches the kit limit of 12m. The track runs the full length of the gate, tail included, so measure your gate and call us if you are unsure.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs a top guide included?\u003c\/summary\u003e\u003cp\u003eNo. Add a \u003ca href=\"\/products\/premium-guide-bracket-nylon-rollers\"\u003etop guide bracket\u003c\/a\u003e on the post to keep the gate upright as it runs.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan the gate be motorised?\u003c\/summary\u003e\u003cp\u003eYes. Cantilever gates can be automated with a \u003ca href=\"\/products\/premium-slider-gate-track-1m-long\"\u003egear rack\u003c\/a\u003e and a sliding gate operator, neither of which is in this kit. Check that the operator is rated for your gate weight.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254356853123,"sku":"SSHF-933187-01","price":1831.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/heavy-cantilever-gate-kit-12m-1000kg-in-use.jpg?v=1794142332","url":"https:\/\/industrialsuppliesco.co.uk\/products\/heavy-cantilever-gate-kit-12m-1000kg","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}