{"product_id":"galvanised-palisade-corner-fishplate","title":"Galvanised Palisade Fence Corner Fishplate, Right-Angled Rail Joining Plate","description":"\u003cp\u003e\u003cstrong\u003eA galvanised corner fishplate for turning a steel palisade fence through a corner.\u003c\/strong\u003e If your run changes direction at a post, a flat plate will not do the job, because the two rails meet at an angle. This plate is bent to take a rail on each face of the corner, with one slotted hole in each leg for the bolts. You need one at the top rail and one at the bottom rail of every corner post, so plan for two per corner. The price shown is for one plate, with a minimum order of 5, which covers two corners and one spare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this is a fence fitting. It is not a lifting bracket or a structural connector, and it should not be used for anything other than joining palisade rails.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/palisade-corner-fishplate-galvanised-drawing.jpg?width=1200\" alt=\"Drawing of the galvanised palisade corner fishplate, a right-angled plate with one slot in each leg\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this plate works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe bend does the work.\u003c\/strong\u003e The angle is formed in the plate, so the two rails meet the corner post squarely without you having to cut, twist or pack anything on site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSlots give you some adjustment.\u003c\/strong\u003e Each leg has a long slotted hole instead of a tight round one. That gives you a little play to bring the bolt holes in line when the posts are set in concrete and cannot move.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne piece of steel.\u003c\/strong\u003e A corner is where a fence is pulled from two directions, so a single bent plate with no joint in it is the right part for the position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised like the rest of the fence.\u003c\/strong\u003e The zinc finish matches galvanised posts, pales and rails, and suits outdoor use with no painting.\u003c\/p\u003e\n\u003cp\u003eIn short: a ready-formed angle, slotted holes and a finish that matches the fence.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eThe corners of steel palisade perimeters around yards, depots, compounds and factory boundaries, at any point where the line turns through a right angle. It also suits repairs to a corner that has taken a vehicle strike and needs new fittings. Straight runs and free ends take a different plate, so check each post position before you order.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne corner fishplate, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRight-angled plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHoles\u003c\/th\u003e\n\u003ctd\u003eOne slotted hole in each leg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGalvanised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUsed with\u003c\/th\u003e\n\u003ctd\u003ePalisade fence rails and posts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity needed\u003c\/th\u003e\n\u003ctd\u003eTwo per corner, one for each rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixings\u003c\/th\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall size\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right plate\u003c\/h2\u003e\n\u003cp\u003eWalk the line of the fence and note what happens at each post. Where the rails continue straight through the post, use a mid plate. Where the fence stops at a post, use an end plate. Where the fence turns, use this corner plate. Each position takes one plate for the top rail and one for the bottom rail. If your corner is much sharper or wider than a right angle, call us before ordering, because this plate is formed to a fixed angle.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003ePost position\u003c\/th\u003e\n\u003cth\u003ePlates per post\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCorner\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eThis plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStraight run\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/galvanised-palisade-mid-fishplate\"\u003eMid fishplate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd of the run\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/galvanised-steel-palisade-fencing-end-fishplate\"\u003eEnd fishplate\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eEach \u003ca href=\"\/products\/palisade-fencing-bay-bag\"\u003ebay bag\u003c\/a\u003e includes two fishplates and the fixings for one bay. You will also need \u003ca href=\"\/products\/heavy-duty-steel-palisade-fencing-rail-2730mm\"\u003erails\u003c\/a\u003e and posts to suit your fence height.\u003c\/p\u003e\n\u003cp\u003eSee every part in our \u003ca href=\"\/collections\/sc-palisade-fencing\"\u003epalisade fencing\u003c\/a\u003e range.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eSet the corner post plumb, then offer the plate up to the post with one leg facing along each run of fence. Bolt the rails to the legs through the slotted holes and nip the bolts up. Check that both runs are straight and level before you tighten everything, because snap-off nuts cannot be undone once they have sheared. Treat any damaged area with a zinc-rich paint, and check the fixings during routine inspections, especially after an impact.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one plate?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one plate, and the minimum order is 5. A corner post takes two plates, one for the top rail and one for the bottom rail.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eAre the bolts included?\u003c\/summary\u003e\u003cp\u003eNo, the plate is sold on its own. Use the M12 bolts and snap-off nuts from a bay bag or your own suitable galvanised fixings.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan it be used for an angle other than a corner?\u003c\/summary\u003e\u003cp\u003eIt is formed to a fixed right angle. A plate should not be hammered to a different angle, because that damages the zinc coating and weakens the bend. Call us if your corner is not close to square.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit my fence?\u003c\/summary\u003e\u003cp\u003eIt is made for use with our galvanised palisade rails and posts. For an existing fence by another maker, compare the bolt positions first, as exact plate sizes are not published for this line.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63266297577859,"sku":"SSHF-287747-01","price":16.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/palisade-corner-fishplate-galvanised-in-use.jpg?v=1794321499","url":"https:\/\/industrialsuppliesco.co.uk\/products\/galvanised-palisade-corner-fishplate","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}