{"product_id":"floor-paint-brush-2-inch-50mm-epoxy","title":"2 Inch Floor Paint Brush 50mm | For Epoxy Coatings, Cutting In \u0026 Stairs | Single or 10 Pack","description":"\u003ch2\u003e2 inch floor paint brush for epoxy coatings and cutting in\u003c\/h2\u003e\n\u003cp\u003eEven with a roller and a mini roller, some parts of a floor job need a brush: tight corners, round pipes and machinery feet, the nosing and edges of stairs, and line marking. This 2 inch (50mm) brush is made for coating application. It lets you cut in neatly round intricate areas, keep a clean edge and control exactly how much coating goes on, so the brushed areas match the rolled floor.\u003c\/p\u003e\n\u003cp\u003eFlooring contractors, maintenance teams and DIY installers keep a few in the kit for every epoxy floor, primer and top coat job.\u003c\/p\u003e\n\n\u003ch2\u003eWhy it works\u003c\/h2\u003e\n\u003ch3\u003eNeat edging where a roller cannot go\u003c\/h3\u003e\n\u003cp\u003eThe 2 inch head reaches into the corners, joints and awkward shapes that a nylon roller misses, so there are no bare spots round the edge of the floor.\u003c\/p\u003e\n\u003ch3\u003eClose control of thickness\u003c\/h3\u003e\n\u003cp\u003eA brush lets you lay the coating at an even thickness by hand, which matters with epoxy, where thin patches wear early and thick ones can sag or cure badly.\u003c\/p\u003e\n\u003ch3\u003eMade for epoxy coatings\u003c\/h3\u003e\n\u003cp\u003eIt is suited to epoxy floor coatings as well as general floor paints, and it is equally useful for painting stairs and line marking.\u003c\/p\u003e\n\n\u003ch2\u003eWhere it's used\u003c\/h2\u003e\n\u003cp\u003eCutting in floor paint round walls, columns, drains and machinery, painting stairs and steps, and line marking in warehouses and car parks. For a metallic floor, use it with the \u003ca href=\"\/products\/metallic-epoxy-floor-base-coat-primer-white-grey-black\"\u003ebase coat\u003c\/a\u003e and \u003ca href=\"\/products\/metallic-floor-top-coat-clear-gloss-silk-matt\"\u003etop coat\u003c\/a\u003e, whose instructions say to cut in the edges with a brush.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e2 inch (50mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBristles\u003c\/th\u003e\n\u003ctd\u003eNatural, pale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandle\u003c\/th\u003e\n\u003ctd\u003eWooden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFerrule\u003c\/th\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd\u003eEpoxy coatings, floor paints, cutting in, stairs and line marking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePacks\u003c\/th\u003e\n\u003ctd\u003eSingle or 10 pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose by how many coats and jobs you have. Two-part coatings cure in the bristles, so a brush used in epoxy is usually finished once the coat is done. The 10 pack works out far cheaper per brush and gives you a fresh brush for every coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eJob\u003c\/th\u003e\n\u003cth\u003ePack\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne coat, one small area\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMetallic floor, 3 steps and 2 top coats\u003c\/td\u003e\n\u003ctd\u003e10 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrade use, several jobs or a team\u003c\/td\u003e\n\u003ctd\u003e10 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eUse it alongside a \u003ca href=\"\/products\/mini-roller-4-inch-and-frame-epoxy-cutting-in\"\u003e4 inch mini roller\u003c\/a\u003e for edges and a \u003ca href=\"\/products\/roller-frame-12-inch-floor-paint-epoxy\"\u003e12 inch roller frame\u003c\/a\u003e for the open floor.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation, use and care\u003c\/h2\u003e\n\u003cp\u003eFlick the bristles against your hand before first use to shake out any loose hairs. Dip only the first third of the bristles, wipe off the excess on the side of the tin or scuttle, then work the coating into the corner or edge in short strokes and finish with light strokes in one direction. Cut in a strip out from the edges, then roll the open floor up to it while the edge is still wet. Clean water based paints out with water straight after use; for epoxy, use a fresh brush on the next coat.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eCan I reuse it after epoxy?\u003c\/h3\u003e\n\u003cp\u003eTwo-part epoxy cures in the bristles, so plan on a fresh brush for each coat. The 10 pack keeps the cost down.\u003c\/p\u003e\n\u003ch3\u003eWhat size is it?\u003c\/h3\u003e\n\u003cp\u003e2 inch, which is 50mm wide.\u003c\/p\u003e\n\u003ch3\u003eCan I use it for line marking?\u003c\/h3\u003e\n\u003cp\u003eYes. It is suited to line marking and painting stairs as well as cutting in.\u003c\/p\u003e\n\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eSold singly or in packs of 10. The current delivery time is shown near the price, and the delivery charge is confirmed at checkout. For trade quantities, call \u003ca href=\"tel:01744520110\"\u003e01744 520110\u003c\/a\u003e or email \u003ca href=\"mailto:sales@industrialsuppliesco.co.uk\"\u003esales@industrialsuppliesco.co.uk\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Single","offer_id":63252594491779,"sku":"PAINT-BRUSH-2IN-1","price":4.9,"currency_code":"GBP","in_stock":true},{"title":"10 Pack","offer_id":63252594524547,"sku":"PAINT-BRUSH-2IN-10","price":27.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/floor-paint-brush-2-inch-cutting-in-epoxy-stairs-7c604641-763f-44c1-a32f-12b1dcbc375d.jpg?v=1794081070","url":"https:\/\/industrialsuppliesco.co.uk\/products\/floor-paint-brush-2-inch-50mm-epoxy","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}