{"product_id":"double-bearing-sliding-gate-wheel-80mm-20mm-round-groove-m10-axle","title":"Double Bearing Sliding Gate Wheel 80mm, 20mm Round Groove, M10 Bolt-Through Axle","description":"\u003cp\u003e\u003cstrong\u003eAn 80mm double bearing wheel for a sliding gate running on a 20mm round bar ground track.\u003c\/strong\u003e The wheel is 78mm measured, with a half-round groove 20mm across and a rim 25mm wide. An M10 threaded axle bolt, with its nuts, comes with the wheel, so you fix it by bolting through the side of a channel or bracket under your gate's bottom rail. It has a double bearing, so the load on the axle is shared. No load rating is published for it, so match it to a gate of known weight or call us before you order. The price shown is for one wheel, with a minimum order of 6.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/double-bearing-sliding-gate-wheel-80mm-20mm-round-groove-m10-axle-drawing.jpg?width=1200\" alt=\"Drawing of the 80mm double bearing sliding gate wheel with a 20mm round groove, showing the published dimensions\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCompact, with the M10 axle.\u003c\/strong\u003e At 78mm measured it is the smallest of the double bearing round groove wheels. The 62mm bolt length and 0.65kg weight make it easy to tuck under a shallow bottom rail on a light gate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe groove holds the line.\u003c\/strong\u003e The half-round groove seats on the track and keeps the wheel from wandering, so the gate runs straight along the round bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo bearings on the axle.\u003c\/strong\u003e The double bearing shares the load between two bearings rather than one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolts straight on.\u003c\/strong\u003e The M10 axle bolt goes through the side of a channel or bracket and is held with its nut, so you can fit and replace it without welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlated against rust.\u003c\/strong\u003e The wheel and bolt are yellow zinc plated, not hot-dip galvanised.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eLight to mid-sized sliding gates on 20mm round bar track, at small car parks, trade units and rear yards. It also replaces a worn wheel of the same 78mm size on an existing gate where the bottom rail is shallow.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel, M10 axle bolt and nuts, minimum order 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003eSold as 80mm, 78mm measured on the data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eHalf-round groove, 20mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack\u003c\/th\u003e\n\u003ctd\u003e20mm diameter round bar ground track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim width overall\u003c\/th\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxle\u003c\/th\u003e\n\u003ctd\u003eM10 threaded bolt with nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength over the bolt\u003c\/th\u003e\n\u003ctd\u003e62mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eBolt-through, in a channel or bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eDouble bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eYellow zinc plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum load\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 0.65 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose the groove first, because it must match your track. Then the fixing, then the diameter: a larger wheel rolls over grit more easily but needs more room under the rail.\u003c\/p\u003e\n\u003cp\u003eThis is the entry size of the double bearing range. The 100mm wheel moves up to an M14 axle and the wheel is larger, so choose that for a longer or heavier gate. Stay on this 80mm where the space under the rail is limited: the wheel is 78mm tall and the bolt is short. If you want a weld-on fitting with no bolt showing, a version with plates is listed, and if you do not need the double bearing, our 80mm bolt-through wheel is in the table.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eHow it differs\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e80mm double bearing round groove, M10 axle\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/80mm-slider-wheel-20mm-track\"\u003e80mm round groove wheel, bolt-through axle\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRound bar track, no double bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/80mm-box-section-slider-wheel\"\u003e80mm round groove wheel in a bracket\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eBracket with a top fixing plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eLay the track first, straight and level. Most sliding gates run on two wheels, set about a fifth of the gate length in from each end. Fix a channel or a bracket under your bottom rail and bolt the wheel through it, so the M10 axle bolt is supported on both sides of the wheel where you can. The axle is M10 and the wheel and bolt measure 62mm long over the bolt. Drill the channel or bracket to take a 10mm bolt, and allow for the 25mm rim. Check the gate runs its full travel without binding before you tighten up fully.\u003c\/p\u003e\n\u003cp\u003eKeep grit and leaves off the track, because that is what wears a wheel. Check the axle nuts and that the wheel runs freely at each service.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one wheel, and the minimum order is 6. Most sliding gates run on two wheels. For a larger job, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat track does it run on?\u003c\/summary\u003e\u003cp\u003eA 20mm diameter round bar ground track. The groove measures 20mm across on the data sheet. It will not run on V section track.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat does double bearing mean?\u003c\/summary\u003e\u003cp\u003eThe wheel runs on two bearings rather than one, so the load on the axle is shared between them. No load rating is published for this wheel, so match it to a gate of known weight or call us.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 6 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254458761603,"sku":"SSHF-727363-01","price":9.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/double-bearing-sliding-gate-wheel-80mm-20mm-round-groove-m10-axle-in-use.jpg?v=1794145503","url":"https:\/\/industrialsuppliesco.co.uk\/products\/double-bearing-sliding-gate-wheel-80mm-20mm-round-groove-m10-axle","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}