{"product_id":"double-bearing-sliding-gate-wheel-120mm-20mm-round-groove-m16-axle","title":"Double Bearing Sliding Gate Wheel 120mm, 20mm Round Groove, M16 Bolt-Through Axle","description":"\u003cp\u003e\u003cstrong\u003eA 120mm double bearing wheel for a sliding gate running on a 20mm round bar ground track.\u003c\/strong\u003e The wheel is 118mm measured, with a half-round groove 20mm across and a rim 30mm wide. An M16 threaded axle bolt, with its nuts, comes with the wheel, so you fix it by bolting through the side of a channel or bracket under your gate's bottom rail. It has a double bearing, so the load on the axle is shared. No load rating is published for it, so match it to a gate of known weight or call us before you order. The price shown is for one wheel, with a minimum order of 6.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/double-bearing-sliding-gate-wheel-120mm-20mm-round-groove-m16-axle-drawing.jpg?width=1200\" alt=\"Drawing of the 120mm double bearing sliding gate wheel with a 20mm round groove, showing the published dimensions\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWider rim, bigger axle.\u003c\/strong\u003e At 118mm measured with a 30mm rim and an M16 axle, this is a step up in bulk from the 100mm wheel. The M16 axle and the 30mm rim are what you are paying for, more so than the extra 20mm of diameter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe groove holds the line.\u003c\/strong\u003e The half-round groove seats on the track and keeps the wheel from wandering, so the gate runs straight along the round bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo bearings on the axle.\u003c\/strong\u003e The double bearing shares the load between two bearings rather than one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolts straight on.\u003c\/strong\u003e The M16 axle bolt goes through the side of a channel or bracket and is held with its nut, so you can fit and replace it without welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlated against rust.\u003c\/strong\u003e The wheel and bolt are yellow zinc plated, not hot-dip galvanised.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eLarger sliding gates on 20mm round bar track at depots, industrial estates and busy commercial yards. It is also the replacement for a worn 118mm wheel on the same track, and a good choice for a longer gate where the wheels see plenty of use.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel, M16 axle bolt and nuts, minimum order 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003eSold as 120mm, 118mm measured on the data sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eHalf-round groove, 20mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrack\u003c\/th\u003e\n\u003ctd\u003e20mm diameter round bar ground track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRim width overall\u003c\/th\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxle\u003c\/th\u003e\n\u003ctd\u003eM16 threaded bolt with nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength over the bolt\u003c\/th\u003e\n\u003ctd\u003e84mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eBolt-through, in a channel or bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eDouble bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eYellow zinc plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum load\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 2.12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right option\u003c\/h2\u003e\n\u003cp\u003eChoose the groove first, because it must match your track. Then the fixing, then the diameter: a larger wheel rolls over grit more easily but needs more room under the rail.\u003c\/p\u003e\n\u003cp\u003eDown a size, the 100mm wheel keeps a 25mm rim and drops to an M14 axle. Up a size, the 140mm double bearing wheel adds diameter but keeps the same M16 axle and 30mm rim, so it gives you more rolling height rather than a stronger axle. The 120mm V wheel in the range is for V track only and will not seat on a round bar. If you do not need the double bearing, our standard 120mm bolt-through wheel is in the table.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eHow it differs\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e120mm double bearing round groove, M16 axle\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/double-bearing-sliding-gate-wheel-100mm-20mm-round-groove-m14-axle\"\u003e100mm double bearing round groove wheel, M14 axle\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e98mm wheel, M14 axle, 25mm rim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/double-bearing-sliding-gate-wheel-120mm-v-groove-m16-axle\"\u003e120mm double bearing V groove wheel, M16 axle\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eV groove, for V section track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-slider-wheel-120mm\"\u003e120mm round groove wheel, bolt-through axle\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eRound bar track, no double bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-120mm-slider-wheel\"\u003e120mm round groove wheel in a box section housing\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eHousing with end tabs for a box section rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/120mm-box-section-slider-wheel\"\u003e120mm round groove wheel in a bracket\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eBracket with a top fixing plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eLay the track first, straight and level. Most sliding gates run on two wheels, set about a fifth of the gate length in from each end. Fix a channel or a bracket under your bottom rail and bolt the wheel through it, so the M16 axle bolt is supported on both sides of the wheel where you can. The axle is M16 and the wheel and bolt measure 84mm long over the bolt. Drill the channel or bracket for a 16mm bolt and allow for the 30mm rim. Check the gate runs its full travel without binding before you tighten up fully.\u003c\/p\u003e\n\u003cp\u003eKeep grit and leaves off the track, because that is what wears a wheel. Check the axle nuts and that the wheel runs freely at each service.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, the price is for one wheel, and the minimum order is 6. Most sliding gates run on two wheels. For a larger job, call us and we will confirm availability before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat track does it run on?\u003c\/summary\u003e\u003cp\u003eA 20mm diameter round bar ground track. The groove measures 20mm across on the data sheet. It will not run on V section track.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat does double bearing mean?\u003c\/summary\u003e\u003cp\u003eThe wheel runs on two bearings rather than one, so the load on the axle is shared between them. No load rating is published for this wheel, so match it to a gate of known weight or call us.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 6 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254461776259,"sku":"SSHF-382723-01","price":15.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/double-bearing-sliding-gate-wheel-120mm-20mm-round-groove-m16-axle-in-use.jpg?v=1794145587","url":"https:\/\/industrialsuppliesco.co.uk\/products\/double-bearing-sliding-gate-wheel-120mm-20mm-round-groove-m16-axle","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}