{"product_id":"double-bearing-sliding-gate-wheel-100mm-20mm-round-track-bracket","title":"Double Bearing Sliding Gate Wheel 100mm, 20mm Round Track, 600kg Advised","description":"\u003cp\u003e\u003cstrong\u003eA 100mm double bearing wheel for 20mm round track, with a published advised maximum of 600kg.\u003c\/strong\u003e This is the only wheel in this range with a published weight figure: an advised maximum of 600kg. It is listed at 100mm nominal and 98mm on the data sheet, with a half-round groove 21mm across for 20mm round bar and two bearings in the hub. The wheel comes fitted in a 130mm pressed steel bracket with two 9mm holes at 105mm centres for bolting up under the bottom rail. The price shown is for one wheel with its bracket, with a minimum order of 5.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This wheel runs on 20mm diameter round bar track only. It will not run on V section track or in a cantilever track. Data sheet sizes are a guide; components can vary slightly.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/double-bearing-sliding-gate-wheel-100mm-20mm-round-track-bracket-drawing.jpg?width=1200\" alt=\"Line drawing of the double bearing sliding gate wheel 100mm, 20mm round track, 600kg advised, side view with published dimensions and contact details\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy this wheel works\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA half round groove on a round bar.\u003c\/strong\u003e The groove cups the top of a 20mm round bar and spreads the load along the contact, which keeps the gate centred as it travels and gives a quieter roll than a flat wheel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo bearings in the hub.\u003c\/strong\u003e The axle runs on two bearings, which share the load and help the wheel run true when the gate is pushed from one side. Choose it for gates that are used all day or driven by a motor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA published figure to work from.\u003c\/strong\u003e Most wheels in this range have no published weight limit, so this one gives you something to specify against. The figure is not broken down per wheel or per gate, so if your gate is close to it, call us before ordering rather than assuming it applies to each wheel.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eSteel sliding gates on 20mm round bar at factories, depots and commercial yards, when a figure matters for the specification. The two bearings suit a gate that is used often or driven by a motor. It needs a flat rail underside at least 35mm wide and round bar track, not V track or cantilever track.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne wheel in its bracket, minimum order 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel diameter\u003c\/th\u003e\n\u003ctd\u003e98mm on the data sheet, sold as 100mm nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGroove\u003c\/th\u003e\n\u003ctd\u003eHalf round groove, 21mm across\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits\u003c\/th\u003e\n\u003ctd\u003e20mm diameter round bar track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWheel width\u003c\/th\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eExternal pressed steel bracket, fits under the bottom rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket length\u003c\/th\u003e\n\u003ctd\u003e130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBracket width\u003c\/th\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOverall height\u003c\/th\u003e\n\u003ctd\u003e104mm, bracket top to base of wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eTwo 9mm round holes at 105mm centres in the top of the bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBearing\u003c\/th\u003e\n\u003ctd\u003eDouble bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eAdvised maximum weight 600kg, as published, not stated per wheel or per gate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eYellow zinc plated steel as photographed, coating not published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eAbout 1.44 kg each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right wheel\u003c\/h2\u003e\n\u003cp\u003eIf you have 100mm of V track rather than round bar, the 100mm double bearing V wheel has the same bracket and bearing arrangement but a V groove. If your gate is larger, the 120mm double bearing wheel gives more clearance and a wider bracket. For an 80mm gate on the same track, the compact wheel saves height, but it has no published weight figure. The 98mm bracket wheel we already list is another option on 20mm track.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour gate\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDouble bearing, 20mm round bar, 600kg advised\u003c\/td\u003e\n\u003ctd\u003eThis wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV track instead\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/double-bearing-sliding-gate-wheel-100mm-v-groove-bracket-mount\"\u003e100mm double bearing V wheel\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompact, 20mm track\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/sliding-gate-wheel-80mm-20mm-round-track-compact-bracket\"\u003e80mm compact bracket wheel\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther 98mm bracket wheel\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/premium-98mm-slider-wheel-for-gates\"\u003e98mm bracket wheel for 20mm round track\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSee all \u003ca href=\"\/collections\/sc-gate-stops-wheels\"\u003egate wheels\u003c\/a\u003e and \u003ca href=\"\/collections\/sc-sliding-gate-track\"\u003esliding gate track\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eMark the wheel positions on the bottom rail so the two wheels sit close to the ends of the gate and in line with the track. The bracket needs a flat underside 35mm wide. Bolt through the two holes at 105mm centres, or weld the bracket after grinding the plating off the weld area and working with fume extraction. Fixings are not listed as included, so allow your own. Set the gate so that the wheels sit fully on the track along its whole travel.\u003c\/p\u003e\n\u003cp\u003eKeep the track clear of stones and packed dirt, and check the wheels and fixings at each service. Plating gives light protection only, so touch up scratches and welds with zinc-rich paint. Replace a wheel that has worn or stiffened, and check its partner at the same time.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs the price for one wheel?\u003c\/summary\u003e\u003cp\u003eYes, one wheel complete with its bracket. The minimum order is 5, because gate wheels are bought in numbers for a job. Call us for larger quantities.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs 600kg the limit per wheel or for the whole gate?\u003c\/summary\u003e\u003cp\u003eThe figure is published as an advised maximum weight and is not broken down either way. If your gate is close to 600kg, call us before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat track does it need?\u003c\/summary\u003e\u003cp\u003e20mm diameter round bar. The groove is half round and 21mm across on the data sheet. It does not run on V section track.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eIs it suitable for an automated gate?\u003c\/summary\u003e\u003cp\u003eThe double bearing hub suits gates that move often, but the motor, safety devices and installation must be right for the gate. Have your installer confirm the gate weight against the 600kg advised figure.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eOrder 5 or more online, with Express UK Delivery to your site and same-day dispatch on orders before 2pm, Monday to Friday. For a larger job, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will confirm availability and delivery before you order.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63254446637443,"sku":"SSHF-302531-01","price":16.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/double-bearing-sliding-gate-wheel-100mm-20mm-round-track-bracket-in-use.jpg?v=1794145069","url":"https:\/\/industrialsuppliesco.co.uk\/products\/double-bearing-sliding-gate-wheel-100mm-20mm-round-track-bracket","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}