{"product_id":"deep-sliding-dock-bumper-face-750-x-250-x-100mm","title":"Deep Sliding Dock Bumper Face 750 x 250 x 100mm | Yellow UHMWPE Front Plate, 50mm Extra Projection | Fits 760mm Sliding Bumpers","description":"\u003cp\u003eIf trailers are reaching your building before they reach the bumper face, this deeper face moves the contact point out by 50mm. It is a solid yellow UHMWPE face, 750 x 250 x 100mm, made to drop into the galvanised steel cradle of our 760mm sliding dock bumpers in place of the standard 50mm face. Nothing is bolted through it. The 10mm flange along each side sits in the cradle, and the face slides up and down as the trailer moves on its suspension. It is the face only, priced per piece.\u003c\/p\u003e\n\u003cfigure style=\"margin:16px 0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/deep-sliding-dock-bumper-face-750-x-250-x-100mm-technical-drawing.jpg?v=1793968447\u0026amp;width=1200\" alt=\"Technical drawing of the deep sliding dock bumper face 750 x 250 x 100mm, showing the plain face, the end profile with its 10mm flange and the bumpers it suits\" width=\"1200\" height=\"1200\" loading=\"lazy\" style=\"display:block;width:100%;max-width:760px;height:auto;margin:0 auto\"\u003e\u003c\/figure\u003e\n\u003ch2\u003eWhy fit the deeper face\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e50mm more stand-off.\u003c\/strong\u003e The standard face is 50mm thick. This one is 100mm, so the trailer stops 50mm further from the dock wall. That extra space can help where rear bumpers, tail lifts or under-run bars have been catching the building or the leveller.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA low friction surface.\u003c\/strong\u003e UHMWPE has a very low friction coefficient, so the back of the trailer can slide along the face as it rises and drops during loading, instead of dragging on it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo holes in the face.\u003c\/strong\u003e The face is plain and flat with no bolt holes, so nothing on the trailer can catch on a recess or a bolt head.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt slides, it is not fixed.\u003c\/strong\u003e The face is held by its flange in the steel cradle, not by bolts through it. A face that can move with the trailer takes less of a beating than one that is clamped in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy for a driver to see.\u003c\/strong\u003e The bright yellow face stands out against grey concrete, which helps when reversing on to the bay in the mirrors.\u003c\/p\u003e\n\u003cp\u003eIn short: UHMWPE, 100mm deep, 50mm more projection than the standard face, no holes, yellow.\u003c\/p\u003e\n\u003ch2\u003eWhere it is used\u003c\/h2\u003e\n\u003cp\u003eLoading bays at distribution centres, parcel depots, cold stores and factories that already run our 760mm sliding dock bumpers, where a deeper stand-off would suit the trailers that use the bay. It is also the part to keep in stock when you want a face on the shelf for a worn one.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWhat you get\u003c\/th\u003e\n\u003ctd\u003eOne yellow UHMWPE face. The steel cradle is not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e750 x 250 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e17kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eUHMWPE (ultra high molecular weight polyethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody width\u003c\/th\u003e\n\u003ctd\u003e230mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlange\u003c\/th\u003e\n\u003ctd\u003e250mm wide across both sides, 10mm thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing holes\u003c\/th\u003e\n\u003ctd\u003eNone. It is held in the cradle by its flange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtra projection\u003c\/th\u003e\n\u003ctd\u003e50mm more than the standard 50mm face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOur 760 x 270 x 110mm and 760 x 275 x 165mm sliding dock bumpers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad rating\u003c\/th\u003e\n\u003ctd\u003eNot published for this line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003eOne piece\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eChoosing the right face\u003c\/h2\u003e\n\u003cp\u003eBoth of our 760mm sliding dock bumpers come with a 50mm yellow UHMWPE face. This deeper face swaps in for it in the same cradle. By our working, from the 50mm the deeper face adds, the overall depth becomes about 160mm on the 760 x 270 x 110mm bumper and about 215mm on the 760 x 275 x 165mm bumper.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYou want\u003c\/th\u003e\n\u003cth\u003eChoose\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eA complete bumper, 110mm deep\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-270-x-110mm\"\u003e760 x 270 x 110mm sliding dock bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA complete bumper, 165mm deep\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/rubber-steel-dock-bumper-760-x-275-x-165mm\"\u003e760 x 275 x 165mm deep sliding dock bumper\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA like-for-like standard face, 50mm thick\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/heavy-duty-dock-bumper-front-panel\"\u003e750 x 250 x 50mm UHMWPE front panel\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50mm more stand-off on either bumper\u003c\/td\u003e\n\u003ctd\u003eThis deep face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eA deeper face is not always better. The trailer stops further from the dock, so the leveller lip has further to reach. Check that your leveller lip will still land on the trailer bed with a safe overlap before you change every bay.\u003c\/p\u003e\n\u003ch2\u003eFitting and care\u003c\/h2\u003e\n\u003cp\u003eLift the worn face up and out of the cradle and lower this one in, flange first, so it sits square and slides freely. If an angle bracket is fitted above the bumper, it may need to come off first. At 17kg the face is twice the weight of the standard one, so have two people handle it at height. Check the face for wear and the cradle bolts for tightness during routine dock inspections. A dock bumper protects the building and vehicle from routine contact. It is not a vehicle restraint and does not replace wheel chocks or a banksman.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eIs this a complete dock bumper?\u003c\/summary\u003e\u003cp\u003eNo, it is the face only. It fits the galvanised steel cradle of our 760mm sliding dock bumpers, which is sold with those bumpers or on its own as a back plate.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eDo I need any fixings?\u003c\/summary\u003e\u003cp\u003eNo. There are no holes in the face. It is held by its 10mm flange in the cradle and slides up and down in it.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill it fit another make of sliding bumper?\u003c\/summary\u003e\u003cp\u003eIt is made for our 760mm sliding bumpers. For another make, measure the inside of the cradle and compare it with the 250mm flange and 230mm body before you order.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow much further out will the trailer stop?\u003c\/summary\u003e\u003cp\u003e50mm further than with the standard 50mm face, because this face is 100mm deep.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eHow many do I need per door?\u003c\/summary\u003e\u003cp\u003eMost loading bays have two bumpers, one each side of the dock leveller, so most doors need two faces. The price shown is for one.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2\u003eOrdering and delivery\u003c\/h2\u003e\n\u003cp\u003eAdd the quantity you need above. For a delivery date, a whole site or several doors, call 01744 520 110 or email sales@industrialsuppliesco.co.uk and we will go through it with you.\u003c\/p\u003e\n","brand":"Industrial Supplies Co","offers":[{"title":"Default Title","offer_id":63244085035395,"sku":"DB-UHMW-750X250X100-FACE","price":555.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/deep-yellow-uhmwpe-sliding-dock-bumper-faces-750-x-250-x-100mm-loading-dock.jpg?v=1793968447","url":"https:\/\/industrialsuppliesco.co.uk\/products\/deep-sliding-dock-bumper-face-750-x-250-x-100mm","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}