{"product_id":"db26-steel-dock-bumper-dual-rubber-pad-heavy-duty-galvanised-loading-bay-buffer-twin-pad","title":"Steel Dock Bumper Dual Rubber Pad 730×280×140mm – Heavy Duty Galvanised Loading Bay Buffer Twin Pad","description":"\u003cp\u003e\u003cstrong\u003eThe Steel Dock Bumper with Dual Rubber Pad 730 x 280 x 140mm is engineered for UK loading bays where maximum impact absorption is required across the full width of an HGV contact zone.\u003c\/strong\u003e The twin-pad design sets this bumper apart from single-pad alternatives: two independent rubber pads within the galvanised steel housing distribute impact energy across separate absorption zones, reducing peak stress concentrations and improving performance when vehicles make asymmetric or angled contact. At 730mm tall and 280mm wide with 140mm projection, this is the premium choice for high-throughput distribution centres, heavy logistics hubs, and industrial facilities where dock face protection cannot be compromised.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the Dual Pad Design Outperforms Single-Pad Steel Bumpers\u003c\/h2\u003e\n\u003cp\u003eWhen an HGV reverses into a loading bay at an angle — which is the norm in real-world docking operations rather than the exception — a single central rubber pad concentrates the entire impact load on one point. The dual pad configuration spreads this load across two rubber absorption zones, dramatically reducing the risk of pad deformation, fixing plate stress, and dock wall damage from off-centre impacts. The galvanised steel housing protects both rubber pads from UV, weather, and mechanical surface damage, giving this assembly a service life that far exceeds exposed rubber alternatives. For facilities with high daily vehicle throughput, the twin-pad construction delivers a measurably longer intervals between inspection and replacement cycles.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Rubber Pad Configuration\u003c\/strong\u003e — Twin independent rubber absorption pads within the steel housing distribute impact energy across two points, reducing peak stress loads and improving performance under asymmetric and angled vehicle contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e730mm Height Coverage\u003c\/strong\u003e — Tall profile ensures full coverage of the HGV contact zone, accommodating variation in trailer height across different vehicle types and loading conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e280mm Wide Contact Face\u003c\/strong\u003e — Wide bumper face reduces the risk of vehicle contact missing the bumper on slightly off-line approaches, providing consistent protection across a broad contact area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140mm Projection\u003c\/strong\u003e — Generous standoff distance protects dock face structure, building fabric, and vehicle bodywork from direct contact, reducing repair costs for both facility and fleet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanised Steel Outer Housing\u003c\/strong\u003e — Hot-dip or pre-galvanised steel construction provides long-term corrosion resistance in exposed outdoor loading bay environments, coastal facilities, and wash-down areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Service Life\u003c\/strong\u003e — Steel housing protects rubber pads from UV, ozone, and chemical degradation, significantly extending the usable life of the rubber absorption components compared to exposed rubber bumpers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Integrated Fixing Plate\u003c\/strong\u003e — Structural steel backing plate distributes impact loads across multiple anchor points, preventing working loose and ensuring a permanently secure installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Total Cost of Ownership\u003c\/strong\u003e — Extended pad life and steel housing durability combine to reduce replacement frequency and lifetime maintenance costs compared to all-rubber dock bumpers in equivalent applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e730mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e280mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth (Projection)\u003c\/th\u003e\n\u003ctd\u003e140mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel housing with dual internal bonded rubber pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePad Configuration\u003c\/th\u003e\n\u003ctd\u003eDual rubber pads (twin pad)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSteel Specification\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel (hot-dip or pre-galvanised)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRubber Pad Material\u003c\/th\u003e\n\u003ctd\u003eHigh-density bonded rubber, dual internal pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing Plate\u003c\/th\u003e\n\u003ctd\u003eStructural steel, integrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface Finish\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel — corrosion resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV Resistance\u003c\/th\u003e\n\u003ctd\u003eExcellent (steel housing fully protects rubber pads)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable Vehicles\u003c\/th\u003e\n\u003ctd\u003eHGV, articulated lorry, curtainsider, rigid truck, flatbed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing Method\u003c\/th\u003e\n\u003ctd\u003eThrough-bolt via steel backing plate (fixings not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eGalvanised steel (natural)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eIdeal Applications and Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Throughput Distribution Centres\u003c\/strong\u003e — Dual pad construction is specifically suited to facilities with high daily dock cycle counts; reduced stress concentration per impact extends service intervals significantly over single-pad alternatives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExposed Outdoor Loading Bays\u003c\/strong\u003e — Galvanised steel housing makes this bumper the correct choice for external docks subject to UK weather including rain, frost, and UV exposure, where rubber-only bumpers degrade rapidly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-Fleet Logistics Operations\u003c\/strong\u003e — The 730mm height and 280mm wide dual-pad face accommodates the range of trailer heights and approach angles in facilities receiving a variety of HGV and LGV vehicle types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled-Approach Dock Positions\u003c\/strong\u003e — Where dock layout geometry forces vehicles to approach at an angle, the twin pad configuration distributes impact load more effectively than single-pad designs, protecting both bumper and dock structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood Production and FMCG Distribution\u003c\/strong\u003e — Suitable for high-frequency operations in food and consumer goods logistics where dock availability and minimal maintenance downtime are operational priorities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial and Manufacturing Logistics\u003c\/strong\u003e — Robust construction suitable for facilities handling heavy raw materials, machinery, or components requiring reliable dock protection across multiple shift patterns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Guide\u003c\/h2\u003e\n\u003cp\u003eBefore installation, confirm the dock face is structurally sound and free from loose material, previous fixings, and surface contamination. Position the bumper centrally on the dock aperture, with the vertical centre at 900-1000mm above finished dock floor level to align with the contact zone of standard HGV trailers. Mark fixing positions through the backing plate and drill holes appropriate for the substrate — concrete, masonry, or structural steel as applicable. Install with heavy-duty through-bolts or chemical anchors rated to the anticipated peak impact load. Torque all fixings to the anchor manufacturer specification and confirm the bumper is plumb, level, and secure before commissioning. For installations where vehicles frequently make angled approaches, consider positioning the bumper slightly offset towards the approach side to optimise dual pad contact. Inspect fixing torque annually; no routine maintenance of the rubber pads or steel housing is required under normal operating conditions.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the advantage of dual rubber pads over a single pad in a steel dock bumper?\u003c\/strong\u003e Two independent rubber pads distribute the impact load across separate absorption zones, which is particularly beneficial when vehicles make angled or off-centre contact with the dock bumper — a common occurrence in real-world docking operations. This reduces peak stress on any single pad and extends the overall service life of the assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this bumper suitable for installation on an external dock exposed to UK weather?\u003c\/strong\u003e Yes. The galvanised steel housing provides long-term corrosion resistance across all typical UK weather conditions. The rubber pads are fully protected from UV and ozone degradation by the steel enclosure, making this assembly suitable for year-round outdoor installation without additional protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the 730mm height compare to other dock bumpers in the range?\u003c\/strong\u003e At 730mm, this is one of the tallest steel dock bumpers in the range, providing coverage across the full contact zone of standard HGV trailers. This height is appropriate for facilities where trailer heights vary significantly across the vehicle fleet, ensuring consistent protection regardless of specific trailer geometry.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSteel Dock Bumper with Dual Rubber Pad 730 x 280 x 140mm\u003c\/strong\u003e represents the most advanced \u003cstrong\u003esteel loading bay bumper\u003c\/strong\u003e specification available for UK logistics and distribution operations. As a premium \u003cstrong\u003etwin pad galvanised dock buffer\u003c\/strong\u003e, it combines the structural durability of \u003cstrong\u003esteel dock bumpers\u003c\/strong\u003e with the progressive energy absorption of \u003cstrong\u003edual rubber dock pads\u003c\/strong\u003e for unmatched performance in high-frequency docking environments. Compare our \u003cstrong\u003edual pad steel dock bumpers\u003c\/strong\u003e with single-pad and all-rubber alternatives — the twin pad design delivers superior load distribution, reduced maintenance frequency, and longer service life. Browse our complete \u003cstrong\u003edock bumper\u003c\/strong\u003e range, including \u003cstrong\u003erubber loading bay buffers\u003c\/strong\u003e, \u003cstrong\u003eUHMWPE dock bumpers\u003c\/strong\u003e, and \u003cstrong\u003egalvanised steel dock buffers\u003c\/strong\u003e to specify the right solution for every dock position in your facility.\u003c\/p\u003e","brand":"Industrial Supplies UK","offers":[{"title":"730 × 280 × 140mm","offer_id":57696308494723,"sku":"DB-STL-DP2-DB26-16","price":1149.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/db26-steel-dual-pad-dock-bumper.png?v=1774799824","url":"https:\/\/industrialsuppliesco.co.uk\/products\/db26-steel-dock-bumper-dual-rubber-pad-heavy-duty-galvanised-loading-bay-buffer-twin-pad","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}