{"product_id":"db15-heavy-duty-plastic-dock-bumper-replaceable-front-hgv-loading-bay-impact-buffer","title":"Heavy Duty Plastic Dock Bumper 470×270×66mm – Replaceable Front HGV Loading Bay Impact Buffer","description":"\u003cp\u003e\u003cstrong\u003eFor high-traffic loading bays where dock bumpers take the full force of daily HGV docking cycles, the ability to replace just the impact face — rather than the entire bumper unit — delivers a dramatically lower total cost of ownership.\u003c\/strong\u003e The 470 x 270 x 66mm Heavy Duty Plastic Dock Bumper with Replaceable Front Face combines a structural steel back frame with a replaceable high-density polyethylene (HDPE) impact face, allowing dock managers to replace only the worn impact surface rather than the entire assembly. At £596.00, this represents a premium investment that pays for itself in reduced replacement and labour costs across the service life of the installation.\u003c\/p\u003e\n\n\u003ch2\u003eThe Replaceable Face Advantage: Lower Lifetime Cost, Less Downtime\u003c\/h2\u003e\n\u003cp\u003eTraditional rubber dock bumpers are replaced as a complete unit when the impact face wears beyond acceptable limits — requiring disassembly of the fixing bolts, removal of the old unit, and full reinstallation of the new bumper. This process requires scaffold access in some installations and takes dock doors out of service for extended periods. The replaceable face design fundamentally changes this equation: when the HDPE impact face shows wear, it is simply unbolted from the fixed steel frame and replaced — a process that can be completed in minutes rather than hours, without disturbing the structural fixings or interrupting dock operations on adjacent doors. For high-volume operations running multiple dock doors, this operational advantage compounds across every replacement cycle.\u003c\/p\u003e\n\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable HDPE Impact Face\u003c\/strong\u003e — Replace only the worn surface when needed; steel frame remains permanently fixed, eliminating full bumper replacement costs and installation downtime\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Density Polyethylene (HDPE) Construction\u003c\/strong\u003e — Impact-resistant plastic compound engineered for dock use; resists cracking, splitting, and UV degradation better than standard rubber in certain environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e470 x 270mm Face Profile\u003c\/strong\u003e — Generous face area provides wide HGV trailer contact zone, distributing impact forces across a larger surface to reduce peak loading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e66mm Standard Depth\u003c\/strong\u003e — Controlled impact absorption depth suitable for standard loading bay docking speeds and vehicle weights\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructural Steel Frame\u003c\/strong\u003e — Permanent installation base remains in situ throughout the bumper's service life; anchor bolts need only be installed once\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Maintenance Downtime\u003c\/strong\u003e — Face replacement takes minutes compared to full bumper replacement; dock operations minimally disrupted during maintenance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Specification Grade\u003c\/strong\u003e — Designed for high-throughput distribution centres where operational reliability and reduced maintenance costs are paramount\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e470mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e270mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth (Projection)\u003c\/th\u003e\n\u003ctd\u003e66mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eReplaceable HDPE plastic face with structural steel frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact Face Material\u003c\/th\u003e\n\u003ctd\u003eHigh-Density Polyethylene (HDPE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrame Material\u003c\/th\u003e\n\u003ctd\u003eStructural steel — permanent installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing Method\u003c\/th\u003e\n\u003ctd\u003ePre-drilled steel frame for M20 anchor bolts (bolts not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReplaceable Component\u003c\/th\u003e\n\u003ctd\u003eHDPE front face — bolt-on\/bolt-off replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack HDPE face \/ steel frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Use\u003c\/th\u003e\n\u003ctd\u003eHigh-throughput docks where frequent face replacement is required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation Surface\u003c\/th\u003e\n\u003ctd\u003eConcrete or masonry dock face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eUnited Kingdom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eIdeal Applications \u0026amp; Use Cases\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Volume Distribution Centre Docks\u003c\/strong\u003e — Facilities running 50+ docking cycles per door per day will cycle through standard rubber bumpers rapidly; the replaceable face design dramatically reduces ongoing replacement costs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Hour Operation Logistics Hubs\u003c\/strong\u003e — Around-the-clock operations cannot afford extended dock door downtime for bumper replacement; the quick-change face replacement minimises disruption to continuous operations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature-Controlled Facility Docks\u003c\/strong\u003e — Cold store and frozen food distribution docks subject bumpers to particularly harsh conditions; HDPE offers good low-temperature impact resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-User Business Parks\u003c\/strong\u003e — Shared dock facilities serving multiple tenants with high combined docking frequency benefit from the reduced maintenance cost and faster face replacement capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFacilities with Dock Maintenance Contracts\u003c\/strong\u003e — Operations running regular dock equipment maintenance schedules benefit from the predictable, low-cost face replacement cycle that this design enables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium New-Build Warehouse Specifications\u003c\/strong\u003e — For new warehouse developments with long-term operational cost optimisation in mind, replaceable-face bumpers deliver the best lifetime value\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation Guide\u003c\/h2\u003e\n\u003cp\u003eInstallation of the steel frame follows the same procedure as standard dock bumpers. Position the steel frame at the correct height on the dock face — typically with the bumper centre at 1,050–1,150mm from dock floor level for standard articulated trailer operations. Use the frame as a drilling template to mark anchor hole positions. Drill anchor holes to the required depth for M20 anchor bolts into solid concrete or masonry. Install the steel frame and torque anchor bolts to specification. Attach the HDPE face plate using the supplied bolts — hand-tight is sufficient for the face fixing bolts, as these are designed for easy removal during face replacement. For face replacement: simply loosen and remove the face fixing bolts, slide out the worn HDPE face, slide in the new face, and re-torque the face fixing bolts. No disturbance to the anchor fixings or dock face is required.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know when the HDPE face needs replacing?\u003c\/strong\u003e Inspect the face regularly as part of your dock equipment maintenance programme. Replace when the HDPE shows cracking, significant surface erosion reducing the projection depth, or any deformation that prevents consistent trailer contact. A good practice is to establish a planned replacement interval based on your actual docking frequency.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre replacement face plates available separately?\u003c\/strong\u003e Yes — replacement HDPE face plates are available for this bumper system. Contact our team for replacement face pricing and availability to plan your maintenance programme.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the HDPE face more durable than rubber?\u003c\/strong\u003e HDPE and rubber have different performance characteristics. HDPE is more resistant to cracking under UV exposure and maintains its profile more consistently in high-frequency docking. Rubber typically provides slightly better energy absorption at low temperatures. The key advantage of this system is the replaceability rather than a claim of absolute superiority in all conditions.\u003c\/p\u003e\n\n\u003cp\u003eThis Heavy Duty Plastic Dock Bumper with Replaceable Front Face is part of our comprehensive range of \u003cstrong\u003eloading bay dock bumpers\u003c\/strong\u003e and \u003cstrong\u003eprofessional dock protection systems\u003c\/strong\u003e. We stock the complete range from economy rubber bumpers through to UHMWPE plastic and steel-internal heavy-duty bumpers for every specification and budget. All products are held in UK stock for fast nationwide delivery. Contact our technical team for volume pricing, replacement face availability, project specifications, or advice on dock bumper selection. Suitable as a \u003cstrong\u003ereplaceable face dock bumper\u003c\/strong\u003e, \u003cstrong\u003eHDPE loading bay bumper\u003c\/strong\u003e, or \u003cstrong\u003eheavy duty plastic dock buffer\u003c\/strong\u003e for high-throughput distribution, warehousing, and logistics operations across the UK.\u003c\/p\u003e","brand":"Industrial Supplies UK","offers":[{"title":"470 × 270 × 66mm","offer_id":57696196592003,"sku":null,"price":715.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/db15.png?v=1774797558","url":"https:\/\/industrialsuppliesco.co.uk\/products\/db15-heavy-duty-plastic-dock-bumper-replaceable-front-hgv-loading-bay-impact-buffer","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}