{"product_id":"damp-tolerant-epoxy-floor-primer-concrete-sealer-damp-proof-membrane","title":"Damp Tolerant Epoxy Primer – Sealer \u0026 Damp Proof Membrane","description":"\u003cp\u003e\u003cspan\u003eProtect concrete floors against moisture with this \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003edamp tolerant epoxy primer\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, a solvent-free, two-part system designed to seal prepared surfaces before subsequent resin floor coatings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA single coat provides a damp tolerant seal and a base for compatible coatings. When applied in two coats, the system forms an effective \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003edamp proof membrane\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, helping to protect against rising damp and moisture contamination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIts low-viscosity formulation provides excellent adhesion and sealing, making it suitable for garages, basements, factories, warehouses and showrooms.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eDamp tolerant seal:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Helps protect concrete surfaces against moisture.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eTwo-coat damp proof membrane:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Provides additional protection against rising damp.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eExcellent adhesion:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Creates a reliable base for subsequent compatible resin coatings.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSolvent-free formulation:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Two-part epoxy system supplied with resin and activator.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHigh coverage:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Approximately 5m² per kg, depending on surface porosity.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eGrey finish:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Provides a practical base coat for concrete flooring.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eCoverage Rates\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan\u003ePack Size\u003c\/span\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cspan\u003eApproximate Coverage per Coat\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e1kg\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e5m²\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e2.5kg\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e12.5m²\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e5kg\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e25m²\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e10kg\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e50m²\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eCoverage depends on surface porosity, texture and condition. Allow for two full coats when using the product as a damp proof membrane.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSuitable Surfaces\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eSuitable for correctly prepared:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eConcrete floors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCementitious screeds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible self-levelling compounds\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eNot suitable for metal or other unsupported flooring materials. This product is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enot self-levelling\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eSurface Preparation\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eRemove any loose or flaking paint and abrade the surface to create a mechanical key. Mechanical preparation by grinding or shot-blasting is recommended for the best results.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhere mechanical preparation is unsuitable, sanding or an appropriate concrete etching cleaner may be considered. Etching cleaners should only be used on bare concrete.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThoroughly sweep and vacuum the prepared area to remove dust, debris and contaminants before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eApplication Guide\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eApply at an ambient temperature of \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eat least 7°C\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\u003cspan\u003eMix Part A using a mixing paddle attached to an electric drill for approximately one minute.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAdd \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eall of Part B\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and mix for a further 90 seconds. Keep the paddle submerged to minimise air incorporation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eImmediately transfer the entire mixed contents into a suitable paint tray or scuttle.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eApply promptly using a resin-suitable roller, using a brush to cut in around edges.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAllow the first coat to cure until it is no longer tacky before recoating. The application guidance allows approximately \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e12–24 hours\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, depending on conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAllow the final coat to cure sufficiently before foot traffic or subsequent compatible coatings.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan\u003ePot Life and Working Time\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe mixed product has a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003epot life of approximately 20 minutes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Transfer it out of the mixing tin immediately after mixing and within this period.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce spread onto the floor, the stated working time is up to \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e40 minutes\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, depending on conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eUse complete packs only. Do not split the resin and activator into smaller batches.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use a fresh roller sleeve for each coat.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cspan\u003eProperty\u003c\/span\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cspan\u003eDetails\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eAppearance\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eGrey base coat\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eComposition\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eLow-viscosity epoxy resin\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eComponents\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePart A resin and Part B activator\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSolvent content\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eSolvent-free\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMinimum ambient application temperature\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7°C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePot life\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eApproximately 20 minutes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWorking time on the floor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUp to 40 minutes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTypical drying time at 20°C\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e12–24 hours\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eApplication tools\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eSuitable rollers and brushes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSelf-levelling\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNo\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eRecoating guidance:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e The supplied information lists both 8–12 hours and 12–24 hours for recoating or foot traffic at 20°C. Confirm the applicable interval against the current technical data sheet before use.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"industrialsuppliesco.co.uk","offers":[{"title":"1KG","offer_id":63013558223235,"sku":null,"price":142.98,"currency_code":"GBP","in_stock":true},{"title":"2.5Kg","offer_id":63013558256003,"sku":null,"price":222.18,"currency_code":"GBP","in_stock":true},{"title":"5KG","offer_id":63013558288771,"sku":null,"price":307.98,"currency_code":"GBP","in_stock":true},{"title":"10KG","offer_id":63013558321539,"sku":null,"price":529.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0621\/3002\/8778\/files\/a755997b-7551-48a6-912a-b65fbf09946e_94e9457e-1f35-492b-9b6b-25372a2d0569.png?v=1792842173","url":"https:\/\/industrialsuppliesco.co.uk\/products\/damp-tolerant-epoxy-floor-primer-concrete-sealer-damp-proof-membrane","provider":"industrialsuppliesco.co.uk","version":"1.0","type":"link"}